<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>


F350R Front Mount Mower-Conditioner

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Hay and Forage

<ul>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel </li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Provides a uniform cut with ground-following gauge wheels</li>
</ul>


1415D Draper Platforms

<ul>
<li>Cutterbar and frame profile gives uninterrupted crop flow</li>
<li>Strong, positive-feeding reel handles all crop conditions</li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Gauge wheels provide ground following for uniform cut</li>
</ul>


435D Draper

<ul>
<li>Structural, tubular frame</li>
<li>Hitch connects quickly and easily</li>
<li>Easy hydraulic operation</li>
</ul>


BU10 Series Bale Unroller

F310R Front Mount Mower-Conditioner

<ul>
<li>Compatible with 7, 8, 9, and 0 Series Balers</li>
<li>Carries 4&#215;6&#8242; bales</li>
<li>Transport width same as baler</li>
<li>Drop 1, 2, or 3 bales at a time</li>
</ul>


Plus2™ A420R Accumulator

<ul>
<li>Full-width feeding pickup</li>
<li>540-rpm PTO power shaft</li>
<li>Deep-flighted auger feeding</li>
<li>Hydraulic bale tension available</li>
</ul>


338 Twine/Wire Baler

<ul>
<li>Small drum cutting</li>
<li>Small drum gathering</li>
<li>Advanced header-height control</li>
<li>Row scrapers and cleaners prevent crop building</li>
</ul>


692 Rotary Harvesting Unit

Hay and Forage Mowing Equipment

<ul>
<li>In 30 minutes or less, you can switch from a rotary head to a 500D Draper head, which means you can harvest small grains and hay with one traction unit.</li>
<li>Quick-change reel teeth can be removed and replaced with minimal effort and tools. Then it’s back to cutting.</li>
<li>Fully integrated controls to the draper means no need for a secondary control box.</li>
</ul>


536D Draper

<ul>
<li>200hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24 mph transport speed</li>
</ul>


W200M Windrower

<ul>
<li>Rope System transport latch</li>
<li>Quick-remove shear hub assembly</li>
<li>DM5050 &#038; 5060 iMatch and Quick Coupler compatible</li>
<li>DM5070 Cat. 2 Quick Coupler compatible</li>
</ul>


DM50 Series Disc Mowers

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>


S250 Mower-Conditioner

<ul>
<li>John Deere-designed rotary cutterbar</li>
<li>Patented diagonally cut module</li>
<li>Hydraulic cutterbar angle adjustment</li>
<li>Adjustable impeller conditioning hood</li>
</ul>


995 Rotary Platform

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Mower Conditioners

R870R Rear Mount Mower-Conditioner

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling</li>
<li>Impeller, urethane or V-10 conditioners</li>
<li>Cutting platform is gear-driven</li>
</ul>


S300 Mower-Conditioner

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling
</li>
<li>Impeller, urethane or V-10 conditioners</li>
<li>Cutting platform is gear-driven</li>
</ul>


C300 Mower-Conditioner

R990R Rear Mount Mower-Conditioner

R950R Rear Mount Mower-Conditioner

<ul>
<li>16 ft 4 in. (5 m) cutting width</li>
<li>Reduce service time with Quick Change Knives</li>
<li>Easier serviceability with modular-design cutterbar</li>
<li>Improve windrow formation and reduce ash content with overshot cross auger</li>
<li>Urethane, V-10 conditioners or Tri-Lobe conditioners</li>
</ul>


C500 Mower-Conditioner

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling
</li>
<li>Decreased horsepower and fuel requirements due to lighter weight<sup>1</sup></li>
<li>Easier serviceability with modular-design cutterbar</li>
<li>Impeller, urethane or V-10 conditioners</li>
</ul>


C400 Mower-Conditioner

View Product Brochure

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       <h5>Tractor hookup </h5>
       
       <p>The F310R and F350R Front-Mounted Mower-Conditioners are used to maximize the potential of the 7R or 8R Tractor equipped with a front power take-off (PTO) and front hitch. This 1000-rpm mower-conditioner can be combined with the following 1000 rpm mower-conditioners to increase productivity:</p>
       <ul>
        <li>Side-pull mower-conditioner</li>
        <li>Center-pivot mower-conditioner</li>
        <li>Twin rear-mounted mower-conditioner</li>
       </ul>
       <p>Unmatched productivity is gained with cutting widths up to 9.9 m (32.5 ft) in one pass along with a narrow transport width.</p>
       
       <p>The A-frame adapter enables quick and easy installation of the F310R or F350R Front-Mounted Mower-Conditioners. The adapter attaches to the tractor’s front 3-point hitch and locks into the mating headstock that is part of the mower-conditioner.</p>
       <ul>
        <li>Enables easy attaching/detaching of front-mounted mower-conditioner</li>
        <li>Mounting position of headstock is adjustable to assure proper clearance for the forming shields</li>
       </ul>
       
       <p>Down stop chains are include for use with tractors, such as the 8R, without front hitch position sensing. A front chain support kit (RE327692) is required to connect the down stop chains on an 8R Tractor.</p>
       <p> </p>
       <p>The 7R Tractors are equipped with position sensing that has the ability to establish front hitch set points from the CommandCenter™ controls. Position sensing will maintain the height of the hitch arms based on the set point.</p>
       <p> </p>
       <p>The front chain support kit (RE327692) is not required for 7R Tractors, but damage to the front PTO driveshaft can occur if the front hitch positioning is not set correctly, or if the set point is manually overridden.</p>
       
       <p>Hydraulic cylinders are used to raise and lower the cutting platform when crossing headlands.</p>
       <ul>
        <li>Front tractor hitch is not used to raise and lower the cutting platform</li>
        <li>Uses single-acting selective control valve (SCV) to raise platform.</li>
        <li>Lift cylinder operation must be independent of the front hitch operation.</li>
       </ul>
      </div>

Use front hitch for maximum productivity

<div>
       
       <p>Large farms, machinery rings and contractors need high quality output, and ease of serviceability.</p>
       <ul>
        <li>The cutterbars are fast mowing, with high quality work and reliable set-up.</li>
        <li>Each disc is protected against heavy shocks with a shear point located on the disc drive.</li>
        <li>All modules and intermediate gears are quickly and easily interchangeable.</li>
       </ul>
       <p>To meet high quality output, the cutterbar is an oil-immersed, gear-driven cutting bed.</p>
       <ul>
        <li>All discs are offering an orbital cutting diameter of 440 mm (17.3 in.).</li>
        <li>With seven discs, the cutting width will be 3.1 m (10.2 ft). With eight discs, the cutting width will be 3.5 m (11.5 ft).</li>
        <li>Disc speeds are 2986 rpm.</li>
       </ul>
       <p>To meet serviceability, the cutting bed is lubricated for life:</p>
       <ul>
        <li>No oil changes necessary.</li>
        <li>Discs are fitted with quick change knives technology.</li>
        <li>Cutting height is from 35 to 85 mm (1.4 to 3.3 in.).</li>
       </ul>
       <p>Time needed to change a knife is below 15 seconds. It is an efficient way to gain up to 30 minutes of maintenance time on the mower conditioners.</p>
       <p> </p>
       
       <p>Cutting height is adjusted by changing the turnbuckle on the front hitch. Cutting range is from 35 mm to 85 mm (1.4 in. to 3.3 in.).</p>
      </div>

High-speed rotary disc cutterbar for cutting in tough conditions

<div>
       <h5>Impeller Style Conditioning</h5>
       
       <p>Producers need to be reactive to weather conditions when harvest is ready. They must cut faster, with efficient conditioning using swathing or wide spread.</p>
       <ul>
        <li>The steel fingers provide the right impact on the plant to remove the waxy coat.</li>
        <li>The R870R is equipped with four V-shaped tines in on both sides of the conditioner and 76 straights.</li>
        <li>The R950R and R990R are equipped with four V-shaped tines in on both sides of the conditioner and 100 straights.</li>
        <li>This accelerates the drying process while requiring little maintenance.</li>
       </ul>
       <p>To improve productivity:</p>
       <ul>
        <li>Two conditioning positions are available at 755 or 1000 rpm.</li>
        <li>Speed change is done by a simple selector on the gear box.</li>
       </ul>
       <p>The desired swath size can easily be obtained with adjustable swath deflectors:</p>
       <ul>
        <li>From 1.2 to 2.0 m (3.9 ft-6.6 ft) on the F310R and F350R</li>
        <li>From 1.45 to 2.40 m (4.7 to 7.9 ft) on the R870R</li>
        <li>From 1.85 to 2.40 m (6.1 to 7.9 ft) on the R950R and R990R</li>
        <li>Wide spread is available on all machines when very fast drying is required</li>
       </ul>
       <p>Proper conditioning in a wide range of crops can be achieved when the conditioner is properly adjusted.<br><br>The impeller conditioner works well in legumes, especially alfalfa and most all-grass crops. Impeller conditioners are not recommended for thick-stemmed or cane-type crops, such as sudan or sudex, or crops more than 1.5-m (5-ft) tall.</p>
       <h5>How an impeller conditioner works:</h5>
       
       <ol>
        <li>As hay is cut by rotating knives, tines (2) pick up the plants and carry them through the machine. Tines are free swinging to reduce damage to the conditioner if rocks or other solid objects are struck. </li>
        <li>As the plant passes through, it rubs against the conditioning hood (1) and other plants. Scuffing action removes the waxy surface from the stem of the plant to allow faster evaporation of moisture.</li>
        <li>The pivot point for the conditioning hood is also adjustable to provide a wider range of conditioning intensity.</li>
       </ol>
       
       <p>The speed at which the tines rotate will also affect the degree of conditioning. Two impeller speeds can be achieved by simply moving the lever from 755 to 1000 rpm.</p>
       <h5>Square Flex Conditioning</h5>
       
       <p>Square Flex conditioning rolls are ideal for alfalfa, but also for heavy forage like sorghum or grasses such as oats or sudan grass. The large diameter (24 cm) provides a good throughput capacity and ensures a smooth material flow without material sticking to the rolls.</p>
       <p> </p>
       <p>Conditioning pressure can be adjusted up to 336 lb/ft by rotating a central adjusting screw placed on the torsion bars. This provides a wide range for conditioning pressure</p>
       <p> </p>
       <p>The double animated rolls are directly driven by maintenance free double transmissions. This allows for synchronization between the two rolls to never need adjustment.</p>
       <p> </p>
       <p>Square Flex conditioning rolls are only available on the F350R, and the R990R.</p>
       
      </div>

Conditioning and swath delivery

<div>
       
       <p>The available room for a windrow is a function of wheel spacing and tire width. The windrow width of the F310R and F350R Front-Mounted Mower-Conditioners may be narrower than the windrows from a twin rear-mounted mower-conditioner if the forming shields are adjusted so the tractor does not drive on the windrow that is produced.</p>
       <h5>Front-mounted mower-conditioner windrow formation</h5>
       
       <p>The desired swath width can easily be obtained by loosening the handle on each side and moving the adjustable swath deflectors to the desired position. Swath width is adjustable from 1.2 to 2.4 m (3.9 to 7.9 ft) on the F310R and F350R Front-Mounted Mower-Conditioners.</p>
       <p> </p>
       <h5>Rear-mount mower-conditioner windrow formation</h5>
       
       <p>Forming shields are easily adjusted to control material flow. This allows the operator to match the windrow width to harvesting requirements.<br><br>The forming shields are easily adjusted to match harvest requirements. No tools are required to adjust the forming shields. Windrow width for the R870R, R950R, and R990R on each unit can be adjusted from 1.3 to 3.2 m (4.3 ft. to 10.5 ft).</p>
      </div>