- Reduce service time with Quick Change Knives
- Updated design and styling
- Impeller, urethane or V-10 conditioners
- Cutting platform is gear-driven
Specifications | |
---|---|
PTO speed | 540 or 1000 rpm |
1000 rpm 1-3/8 in. PTO | 70-150 hp52-112 kW |
Standard hitch | Equal angle |
Optional hitch | Rockshaft swivel or Drawbar swivel |
Hydraulic pressure required | 13,790 kPa2,000 psi |
Cutterbar - cutting width | 3 m9.8 ft |
Number of disks/knifes | 612 |
Transport width | 3 m9.8 ft |
PTO speed | 540 rpm |
540 rpm PTO | 70-81 hp52-60 kW |
Tractor connection | 21 spline |
Standard hitch | Equal angle |
Optional hitch | Rockshaft swivel or Drawbar swivel |
Hydraulic pressure required | 13,790 kPa2,000 psi |
Type | John Deere |
Cutting width | 3 m9.8 ft |
Cutting height | 2.0-9.5 cm0.8-3.8 in. |
Number of disks | 6 |
Number of knives | 12 |
Disk speed | 2,650 rpm |
Knife tip speed | 307 km/h191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 7 L7.4 U.S. qt |
Cutterbar oil check | Combination check, drain plug |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Width | 185 cm73 in. |
Diameter | 60 cm23.5 in. |
Tines type | V-tines |
Number of tines | 45 |
Number of speeds | Two |
Drive | 3-V powerband belt and sheaves |
Width | 185 cm73 in. |
Diameter | 25.4 cm10 in. |
Type of material | Urethane or steel |
Design | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
Speed | 664 rpm |
Drive | Telescoping shaft |
Transport width | 3 m9.8 ft |
Transport length | 6.3 m20.6 ft |
Weight, roll conditioner | Swivel 2,851 kg6,285 lb |
Weight, impeller conditioner | With equal angle 2,376 kg5,238 lbSwivel 2,659 kg5,826 lbWith Urethane roll conditioner: Equal angle 2,519 kg5,553 lbSwivel 2,802 kgWith Steel roll conditioner: Equal angle 2,568 kg5,561 lb |
Standard tires | 11L-15 standard11L-15 standard, 31x13.5L 15 optional |