- 16 ft 4 in. (5 m) cutting width
- Reduce service time with Quick Change Knives
- Easier serviceability with modular-design cutterbar
- Improve windrow formation and reduce ash content with overshot cross auger
- Urethane, V-10 conditioners or Tri-Lobe conditioners
Specifications | |
---|---|
PTO speed | 1000 rpm |
1000 rpm 1-3/8 in. PTO | 120-210 hp89-157 kW |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 17,237 kPa2,500 psi |
Cutterbar - cutting width | 4.9 m16 ft |
Number of disks/knifes | 1020 |
Transport width | 5.03 m16.5 ft |
Tractor connection | 21 spline |
Standard hitch | Rockshaft swivel |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 17,237 kPa2,500 psi |
Type | John Deere |
Cutting width | 4.9 m16 ft |
Cutting height | 1.6-11.7 cm0.63-6.7 in. |
Number of disks | 10 |
Number of knives | 20 |
Disk speed | 2,650 rpm |
Knife tip speed | 307 km/h191 mph |
Disk drive | Gear |
Lubrication | Hy-Gard oil |
Oil reservoir capacity | 11.4 L12 U.S. qt |
Cutterbar oil check | Combination sight glass, drain plug |
Angle adjustment | Manual or hydraulic |
Angle range | 2-8 degree (angle) |
Cutterbar protection | ShearHub |
Adjustable gauge shoes | Yes |
Width | 269 cm105.5 in. |
Diameter | 25.3 cm9.96 in. |
Type of material | Urethane or Steel |
Design | Urethane: Recessed cleat, Steel Intermeshing flutes (V-10 and Tri-Lobe) |
Speed | 1000 rpm |
Drive | Telescoping shaft |
Transport width | 5.03 m16.5 ft |
Transport length | 9.9 m32.5 ft |
Weight, roll conditioner | With Urethane roll conditioner: 4,010 kg8,840 lbWith V-10 steel roll conditioner: 4,091 kg9,020 lbWith Tri-Lobe roll conditioner: 4,148 kg9,145 lb |
Standard tires | 31x13.5 15 8PR |