<ul>
<li>Harvest crops as close as possible to the ground with the HydraFlex™ cutterbar</li>
<li>Minimize grain loss with a two-speed center feed section</li>
<li>Enable higher harvesting speed without sacrificing cut quality with a 4” double cut, dual drive, shaft driven cutterbar</li>
<li>Get more done by eliminating header calibrations</li>
</ul>


RD45F HydraFlex™ Draper

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Draper Platforms

<ul>
<li>Hydrafloat™ allows the operator to match changing field conditions</li>
<li>Dual-knife drive system is timed</li>
<li>Cutterbar is closer to the ground</li>
</ul>


730D Draper Platform

<ul>
<li>Capture more crop in rolling and uneven terrain with a total wing range of 40”</li>
<li>Experience the best of both worlds with a flexible cutterbar on a hinged draper</li>
<li>Easily cut all crops with a consistent reel-to-cutterbar distance and improved reel torque</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
</ul>


HD45F Hinged Frame, Flexible Cutterbar Draper

<ul>
<li>Capture more crop in rolling and uneven terrain with a wing range of over 45”</li>
<li>Easily cut all crops with a consistent reel-to-cutterbar distance and improved reel torque</li>
<li>Achieve desired stubble height with Position Control Gauge Wheels</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
</ul>


HD50R Hinged Frame, Rigid Cutterbar Draper

<ul>
<li>Hydrafloat™ allows the operator to match changing field conditions</li>
<li>Double-cut knife system produces a cleaner cut</li>
<li>Cutterbar is closer to the ground</li>
<li>Stainless-steel feed floor</li>
</ul>


735D Draper Platform

<ul>
<li>Capture more crop in rolling and uneven terrain with a total wing range of 30”</li>
<li>Experience the best of both worlds with a flexible cutterbar on a hinged draper</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
<li>Improve harvest logistics with a factory-installed Integrated Transport system</li>
</ul>


HD35F Hinged Frame, Flexible Cutterbar Draper

<ul>
<li>Capture more crop in rolling and uneven terrain with a wing range of over 35”</li>
<li>Achieve desired stubble height with Position Control Gauge Wheels</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
<li>Improve harvest logistics with a factory-installed Integrated Transport system</li>
</ul>


HD40R Hinged Frame, Rigid Cutterbar Draper

RD35F HydraFlex™ Draper

<ul>
<li>Hydrafloat™ allows the operator to match changing field conditions</li>
<li>Dual-knife drive system is timed</li>
<li>Cutterbar is closer to the ground</li>
<li>Conveniently store optional spare knives</li>
</ul>


740D Draper Platform

<ul>
<li>Capture more crop in rolling and uneven terrain with a wing range of over 30&#8243; </li>
<li>Achieve desired stubble height with Position Control Gauge Wheels</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
<li>Improve harvest logistics with a factory-installed Integrated Transport system</li>
</ul>


HD35R Hinged Frame, Rigid Cutterbar Draper

Harvesting Equipment

<ul>
<li>13.6 L, 555 HP engine</li>
<li>Up to 20 mph transport speed</li>
<li>4.6 mph top harvest speed</li>
<li>Up to 20% greater fuel efficiency<sup>1</sup></li>
<li>8% reduction in wrap and hauling costs<sup>1</sup></li>
</ul>


CP770 Cotton Picker

<ul>
<li>Quick connect design for easy removal </li>
<li>40”, 38”, and 36” row spacing </li>
<li>High capacity 13” diameter cross auger</li>
<li>Heavy-duty mainframe </li>
</ul>


SH8R Cotton Stripper Header: 8-Row Rigid

<ul>
<li>Combine Advisor™ package helps to set, optimize and automate main combine functions when conditions change</li>
<li>Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating</li>
<li>Comfortable S700 cab is common with tractors and sprayers for ease of use</li>
<li>Continued quality manufacturing of S-Series combines maximizes uptime and productivity</li>
</ul>


S770 Combine

<ul>
<li>630 Max engine horsepower</li>
<li>4.6 bu/s peak unload rate</li>
<li>420-bushel power folding grain tank</li>
<li>JDLink™ modem</li>
</ul>


X9 1000 Combine

<ul>
<li>Minimize tire and track damage from stubble with Stalk Deflectors</li>
<li>Easily harvest down and leaning corn with Active End Fenders </li>
<li>Size residue less than 6 inches with RowMax™ Chopping Stalk Rolls</li>
</ul>


C18R Corn Head

C16R Corn Head

C12R Corn Head

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

View X Series Combines Brochure

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       <h5>Overview</h5>
       
       <p>Increase grain in the tank with a two-speed center feed section. A slow-speed setting softens the impact of crop fingers and drum flighting when engaging with crop. This ensures that easy-shelling crops like lentils and soybeans do not get thrown over the feeder house. Use the high-speed setting in canola or high-yielding cereals to prevent slug feeding while ensuring that the drum does not plug.</p>
       <h5>Benefits</h5>
       
       <ul>
        <li>Experience less downtime during harvest related to unplugging the header, which allows for more harvesting time at the highest productivity levels.</li>
        <li>Higher feed drum torque is matched to the capacity of the combine to ensure optimal feed rates into the combine. Higher torque on the front feed drum allows operators to confidently harvest tough feeding crops like canola.</li>
        <li>Additionally, prevent underfeeding in light crops with the center crop flow divider. When not harvesting crop with the full width of the draper, the center crop flow divider prevents crop from skipping over the center feed section and going on the opposite draper belt.</li>
       </ul>
       
       <h5>Additional details</h5>
       
       <ul>
        <li>The two-speed center feed section maintains a consistent ratio between the feed drum and center feed belt speed.</li>
        <li>Change center feed section speed with a toolless, two-speed, easy-shift handle on the gearcase to the left of the draper feeder house opening.</li>
       </ul>
       
       
       <ol>
        <li>Feed  drum gearbox</li>
        <li>Center feed drive shaft</li>
        <li>Knife drive shaft</li>
        <li>Center feed speed control</li>
        <li>Oil check</li>
        <li>Main gearbox</li>
        <li>Center belt gearbox</li>
        <li>Oil check</li>
       </ol>
       <table border="1" width="286" cellspacing="1" cellpadding="1">
        <tbody>
         <tr>
          <td width="84"><p> </p></td>
          <td width="61"><p><strong>Low speed</strong></p></td>
          <td width="64"><p><strong>High speed</strong></p></td>
         </tr>
         <tr>
          <td width="84"><p>Feed drum</p></td>
          <td width="61"><p>200 rpm</p></td>
          <td width="64"><p>240 rpm</p></td>
         </tr>
         <tr>
          <td width="84"><p>Center feed belt</p></td>
          <td width="61"><p>1000 rpm</p></td>
          <td width="64"><p>1200 rpm</p></td>
         </tr>
        </tbody>
       </table>
       <p> </p>
       <table border="1" width="448" cellspacing="1" cellpadding="1">
        <tbody>
         <tr>
          <td width="96"><p> </p></td>
          <td width="105"><p><strong>RDF</strong></p></td>
          <td width="114"><p><strong>HDR</strong></p></td>
         </tr>
         <tr>
          <td width="96"><p>Feed drum torque</p></td>
          <td width="105"><p>1217 lb-ft (1650 Nm)</p></td>
          <td width="114"><p>2109.4 lb-ft (2860 Nm)</p></td>
         </tr>
         <tr>
          <td width="96"><p>Center belt width</p></td>
          <td width="105"><p>70 in. (177.8 cm)</p></td>
          <td width="114"><p>79.1 in. (200.9 cm)</p></td>
         </tr>
        </tbody>
       </table>
      </div>

Optimize feeding with a two-speed center feed section, increased feed drum torque, and center crop flow divider

<div>
       <h5>Overview</h5>
       
       <p>Achieve superior ground following when harvesting in a wide range of terrains, crops, and conditions with RDF HydraFlex Draper Platforms. HydraFlex is an industry-exclusive hydraulic float system.</p>
       
       <h5>Benefits</h5>
       
       <ul>
        <li>Float closely to the ground over changing conditions by controlling the cutterbar ground pressure from the cab – simply adjust the armrest knob to vary hydraulic pressure in the float arm hydraulic cylinders.</li>
       </ul>
       
       <h5>Additional details</h5>
       
       <ul>
        <li>The hydraulic float system features a 7.5-in. (19-cm) float range.</li>
        <li>To lock out the HydraFlex draper into rigid mode, the operator should increase the float pressure to maximum</li>
       </ul>
      </div>

Superior ground following with the HydraFlex™ draper system

<div>
       <h5>Overview</h5>
       
       <p>Help bushy crops, especially heavy canola, feed evenly into the feeder house with an optional 18-in. (45.7-cm) top auger extending the full width of the draper.</p>
       
       <h5>Benefits</h5>
       
       <ul>
        <li>With the crop tucked under the auger, the handoff to the center feed drum enables smooth and consistent feeding to the combine to ensure constant load.</li>
        <li>Achieve smooth headfirst feeding when auger speeds are running slightly faster than the belt speed.</li>
       </ul>
       <h5>Additional details</h5>
       
       <ul>
        <li>This optional 18-in. (45.7-cm) hydraulically driven top auger has an easy speed adjustment at the right side of the platform.</li>
        <li>It is recommended for operation in bushy or high-volume harvesting conditions such as canola.</li>
        <li>Augers can be turned off for crops like lentils or wheat where they are not recommended.</li>
       </ul>
      </div>