<ul>
<li>Hydrafloat™ allows the operator to match changing field conditions</li>
<li>Double-cut knife system produces a cleaner cut</li>
<li>Cutterbar is closer to the ground</li>
<li>Stainless-steel feed floor</li>
</ul>


735D Draper Platform

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Draper Platforms

<ul>
<li>Hydrafloat™ allows the operator to match changing field conditions</li>
<li>Dual-knife drive system is timed</li>
<li>Cutterbar is closer to the ground</li>
</ul>


730D Draper Platform

<ul>
<li>Capture more crop in rolling and uneven terrain with a total wing range of 40”</li>
<li>Experience the best of both worlds with a flexible cutterbar on a hinged draper</li>
<li>Easily cut all crops with a consistent reel-to-cutterbar distance and improved reel torque</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
</ul>


HD45F Hinged Frame, Flexible Cutterbar Draper

<ul>
<li>Harvest crops as close as possible to the ground with the HydraFlex™ cutterbar</li>
<li>Minimize grain loss with a two-speed center feed section</li>
<li>Enable higher harvesting speed without sacrificing cut quality with a 4” double cut, dual drive, shaft driven cutterbar</li>
<li>Get more done by eliminating header calibrations</li>
</ul>


RD45F HydraFlex™ Draper

<ul>
<li>Capture more crop in rolling and uneven terrain with a wing range of over 45”</li>
<li>Easily cut all crops with a consistent reel-to-cutterbar distance and improved reel torque</li>
<li>Achieve desired stubble height with Position Control Gauge Wheels</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
</ul>


HD50R Hinged Frame, Rigid Cutterbar Draper

<ul>
<li>Capture more crop in rolling and uneven terrain with a total wing range of 30”</li>
<li>Experience the best of both worlds with a flexible cutterbar on a hinged draper</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
<li>Improve harvest logistics with a factory-installed Integrated Transport system</li>
</ul>


HD35F Hinged Frame, Flexible Cutterbar Draper

<ul>
<li>Capture more crop in rolling and uneven terrain with a wing range of over 35”</li>
<li>Achieve desired stubble height with Position Control Gauge Wheels</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
<li>Improve harvest logistics with a factory-installed Integrated Transport system</li>
</ul>


HD40R Hinged Frame, Rigid Cutterbar Draper

RD35F HydraFlex™ Draper

<ul>
<li>Hydrafloat™ allows the operator to match changing field conditions</li>
<li>Dual-knife drive system is timed</li>
<li>Cutterbar is closer to the ground</li>
<li>Conveniently store optional spare knives</li>
</ul>


740D Draper Platform

<ul>
<li>Capture more crop in rolling and uneven terrain with a wing range of over 30&#8243; </li>
<li>Achieve desired stubble height with Position Control Gauge Wheels</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
<li>Improve harvest logistics with a factory-installed Integrated Transport system</li>
</ul>


HD35R Hinged Frame, Rigid Cutterbar Draper

Harvesting Equipment

<ul>
<li>13.6 L, 555 HP engine</li>
<li>Up to 20 mph transport speed</li>
<li>4.6 mph top harvest speed</li>
<li>Up to 20% greater fuel efficiency<sup>1</sup></li>
<li>8% reduction in wrap and hauling costs<sup>1</sup></li>
</ul>


CP770 Cotton Picker

<ul>
<li>Quick connect design for easy removal </li>
<li>40”, 38”, and 36” row spacing </li>
<li>High capacity 13” diameter cross auger</li>
<li>Heavy-duty mainframe </li>
</ul>


SH8R Cotton Stripper Header: 8-Row Rigid

<ul>
<li>Combine Advisor™ package helps to set, optimize and automate main combine functions when conditions change</li>
<li>Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating</li>
<li>Comfortable S700 cab is common with tractors and sprayers for ease of use</li>
<li>Continued quality manufacturing of S-Series combines maximizes uptime and productivity</li>
</ul>


S770 Combine

<ul>
<li>630 Max engine horsepower</li>
<li>4.6 bu/s peak unload rate</li>
<li>420-bushel power folding grain tank</li>
<li>JDLink™ modem</li>
</ul>


X9 1000 Combine

<ul>
<li>Minimize tire and track damage from stubble with Stalk Deflectors</li>
<li>Easily harvest down and leaning corn with Active End Fenders </li>
<li>Size residue less than 6 inches with RowMax™ Chopping Stalk Rolls</li>
</ul>


C18R Corn Head

C16R Corn Head

C12R Corn Head

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p>The center feed drum is designed for efficient and consistent feeding of the crop into the combine feeder house. Beginning with model year 2020 700D Draper Platforms, customers will have the ability to choose between a 356-mm (14-in.) or 406-mm (16-in.) center feed drum to be factory installed.<br><br><strong>Feature benefit:</strong></p>
       <ul>
        <li>356-mm (14-in.) or 406-mm (16-in.) diameter factory-installed feed drum significantly improves feeding of the crop</li>
        <li>Strategic location improves crop handling and capacity, increasing productivity in high-volume crops such as irrigated wheat, barley, or canola</li>
        <li>Combine performance is improved due to retractable fingers that enable smoother feeding</li>
        <li>Capacity increase in tough conditions by 20 percent due to an upgraded center feed section slip clutch</li>
       </ul>
       
       <p><strong>Functionality:</strong></p>
       <p> </p>
       <p>The feed drum protrudes forward from the draper back sheets, improving the crop handoff from the draper side belts. An increase in slip clutch torque of the center feed drum from 1200 Nm to 1650 Nm allows for increased capacity in tough crop conditions</p>
       <p> </p>
       <p>In some crop conditions, crop can hesitate at the corners of the feed drum but the retractable drum fingers keep the crop moving into the combine.</p>
      </div>

Two available sizes for a 700D factory-installed center feed drum improves feeding of crop into the combine feeder house

<div>
       
       <p>The 730D, 735D, and 740D Draper models can be equipped with an integrated, slow-speed transport system.</p>
       <p> </p>
       <p><strong>John Deere value:</strong></p>
       <ul>
        <li><p>Need for a header trailer is eliminated due to dual-front dolly wheel tires with an extendable tongue and two-gauge wheel tires that can carry the complete weight of the draper when in transport</p></li>
        <li><p>Road transport is quicker and easier because one person can convert the draper from field to transport mode in a few minutes without the use of tools</p></li>
       </ul>
       <h5>Theory of operation</h5>
       
       <p>In field mode, the dual wheels become the left- and right-hand gauge wheels. For transport, the left-hand dual-dolly wheels support one side of the draper frame and the right-hand dual wheels are repositioned to support the right-hand end of the frame.</p>
       <p> </p>
       <p>The transport package includes warning lights, which can be plugged into a seven-way power source for road transport with a 32.2-km/h (20-mph) speed limit for farm equipment transport.</p>
       
       <p><em>NOTE:</em> <em>The 730D, 735D, and 740D Drapers are equipped with two ST215/75R14 gauge wheel tires as base equipment and four ST215/75D14 <em>gauge wheels with the low-speed transport option</em>.</em></p>
      </div>

Takes one person a few minutes to convert draper from field to transport without use of tools

<div>
       
       
       <p>The unique dual-knife drive system is timed, creating the smoothest-possible reciprocating knife-drive system currently in the industry. The positive, reliable shaft-driven dual epicyclical in-line knife drives with built-in driveline protection, provide operators with the strongest knife-drive system.</p>
      </div>

Dual-knife drive system is timed

<div>
       
       <p>All John Deere 700D Drapers include a double-cut knife which features a hydraulic tilt that is controlled from inside the cab. All 10.6-m (35-ft) and 12.1-m (40-ft) draper cutterbars have knifeback reinforcement straps to strengthen the knifeback.</p>
       <p> </p>
       <p><strong>Feature benefit:</strong></p>
       <ul>
        <li>Maximized productivity through longer stroke of knife section provides a faster, cleaner, and smoother cut, which allows operators to harvest at faster ground speeds</li>
        <li>Productivity is maximized in tough conditions through a reinforced knifeback that strengthens the cutterbar</li>
        <li>Reduced cost of operation and increased wear life with hardened sickle sections and unique boron treatment</li>
        <li>Hydraulic tilt optimizes the cutterbar angle for varying conditions, extending the harvest day and providing the lowest-possible cut height</li>
       </ul>
       
       <h5>Functionality</h5>
       
       <p>The 100-mm (4-in.) cutting action produces a cleaner cut versus the tearing effect of shorter-stroke cutting systems. Knife hold-downs are easily adjusted to help maintain harvesting performance.</p>
       
       <p>The cutterbar hydraulic tilt adjusts a full 8 degrees while maintaining excellent visibility to the cutterbar throughout the tilt range. For improved ease of use, the hydro handle can be configured to control the platform tilt.</p>
      </div>

Double-cut knife system produces a cleaner cut

<div>
       
       <p>Reel resume and reverse are features on the 700D Drapers. The combine operator can store two different reel positions with one setting for normal conditions and another for down, tangled, short, or leaning crops. </p>
       <p> </p>
       <p><strong>Feature benefit:</strong></p>
       <ul>
        <li>Added time savings and convenience with saved reel positions, lowering operator fatigue</li>
        <li>Increased harvest efficiency through a reel-reverse feature that reverses the reel in conjunction with the center feed drum and belt to back out plugs</li>
       </ul>
       
      </div>

Specifications
Cutterbar length	10.67 m35 ft
Knife drive	Base: single (combine use only)Optional: dual knife (combine use only)Base: dual knife (SPW only or SPW/combine combination use)
Knife speed	490 cycles/min
Pickup reel operating speeds	6-54 rpm137.2-cm (54-in.) reel: 5-44 rpm
Draper belts speed control	Hydraulic from cab
Type	Straight-line knife drive system
Length	10.67 m35 ft
Knife drive	Base: single (combine use only)Optional: dual knife (combine use only)Base: dual knife (SPW only or SPW/combine combination use)
Knife speed	490 cycles/min
Cutterbar tilt	Base: hydraulic, maximum tilt 9 degree (angle)
Number of slats	Base: six bat polyOptional: eight bat steel (for forage conditions)
Fingers	Base: nylonOptional: steel (typically used in rice or forage conditions)
Diameter	1.067 m3.5 ftFor rice or forage conditions: 1.371 m4.5 ft
Height control	Hydraulic
Speed control	Hydraulic
Reel lift	Cylinder stroke: 330 mm13 in.Total range: 391.5 mm15.4 in.
Reel fore and aft	Cylinder stroke: 359 mm14.1 in.Total range: 620 mm24.4 in.
Reel resume	Base
Reel reverse	Base
Operating speeds	6-54 rpm
Operating speeds (54-in. reel)	5-44 rpm
Width	Rubber coated polyester with V-Guide tracking: 0.7 L24 ozSide belts: 1.02 m3.33 ftCenter belts: 1.4 m4.583 ftCenter belt not included with SPW configuration
Cleat height	25.4 mm1 in.
Operating speed	Side belts: variable up to 223 m/min735 fpmCenter belts: 212 m/min695 fpmCenter belt not included with SPW configuration
Speed control	Hydraulic from cab
Center belt reverse	Base: center belt not included with SPW configuration
Diameter	Two factory-installed options: 356 or 406 mm14 or 16 in.Feed drum not included with SPW configuration
Feed drum fingers	Steel, heavy-duty, and round with breakaway notch and retainerDiameter: 16 mm0.625 in.
Number of fingers	18
Auger finger platform	Dual chevron, retracting
Finger reach	152 mm6 in.
Drum/auger reverse	Base
Operating speed	195 rpm
Center cleanout door	Base
Type	Base: electrohydraulic
Header height sensing on the ground	Base
Header height sensing off the ground	Base
Type	Optional: hydraulic drive
Platform length	11.6 m37.9 ft
Overall operating depth	2.5 m8.2 ft
Transport width, field position	11.4 m37.5 ft
Transport width on wheel, less dividers	2.7 m8.9 ft
Transport length, hitch extended	13.8 m45.4 ft