<ul>
<li>Parabolic shank is designed to take the ground deep. Standard&nbsp;28&Prime; shank and optional 32&Prime; shank provide exceptional frame&nbsp;clearance.</li>
<li>Component design of heavy double bar clamps enable&nbsp;staggered shank placements on virtually any row width. Clamps&nbsp;spread the load between two bars.</li>
<li>Specialized trip bolt in the front of the clamp provides protection&nbsp;against structural damage to the plow if obstructions are encountered.</li>
<li>Heavy diamond mast three bar frame (Superbar II) and heavy duty&nbsp;Cat. III hitch are standard on all models. Rippers with coulters include&nbsp;tool bars with Heavy Duty Option.</li>
</ul>


PARABOLIC RIPPER

Bigham

<ul>
<li>MegaTill Sub-Soilers&nbsp;include diamond mast four&nbsp;bar frame with 4x4x3/8&rdquo;&nbsp;tube on the front bar.&nbsp;MegaTill Inter-Row SubSoilers include diamond&nbsp;mast double bar frame.&nbsp;Tool bars for 7 and 9 row&nbsp;MegaTill Inter-Row SubSoilers include tool bars&nbsp;with a Heavy Duty Option.&nbsp;Heavy Category III Wide&nbsp;4&rdquo; Drop Hitch is standard&nbsp;on all models.</li>
<li>1 x 8 x 36&rdquo; Shank is constructed from high strength Formally 400 steel to resist stress, bending, and abrasion even&nbsp;under harsh field conditions. The front portion of each shank is protected with a replaceable chromium carbide&nbsp;wear shin. The shin has a pointed front edge to reduce drag and may be rotated for extended wear. 36-inch&nbsp;ground clearance is valuable to obtain optimum plowing depths and provide growing crop clearance. Shanks are&nbsp;also equipped with a chromium carbide point. Chromium material on ground engaging parts can provide up to four&nbsp;times the wear of traditional hardfaced points. All shanks are drilled to accept root cutting knives.</li>
<li>Double bar reinforced clampsspread the shank load and stress between two frame members. Shank may be&nbsp;mounted in the front or back position of each clamp. Shear bolts provide protection if an underground obstruction is&nbsp;encountered.</li>
<li>MegaTill Sub-Soiler features available Spring Loaded Swivel Coulters with 20&rdquo; fluted blades. Coulters provide up to 1200&nbsp;pounds of residue slicing pressure per coulter blade.</li>
</ul>


MegaTill

<table>
<tbody>
<tr>
<td>Model</td>
<td>GCX 850</td>
</tr>
<tr>
<td>Approx. Capacity</td>
<td>850 bu.</td>
</tr>
<tr>
<td>Spindle Size</td>
<td>4.5&#8243;</td>
</tr>
<tr>
<td>Empty Weight</td>
<td>11,800 lbs</td>
</tr>
<tr>
<td>Tongue Weight</td>
<td>10% Total</td>
</tr>
</tbody>
</table>
<table>
<tbody>
<tr>
<td>Model</td>
<td>GCX 100</td>
</tr>
<tr>
<td>Approx. Capacity</td>
<td>1050 bu.</td>
</tr>
<tr>
<td>Spindle Size</td>
<td>4.5&#8243;</td>
</tr>
<tr>
<td>Empty Weight</td>
<td>13,300 lbs</td>
</tr>
<tr>
<td>Tongue Weight</td>
<td>10% Total</td>
</tr>
</tbody>
</table>
<p>&nbsp;</p>


GCX850/GCX1050 Grain Cart

<ul>
<li>Heavy duty diamond mast frame has 4 x 7 x 3/8&rdquo; tube on the front bar. The same frame can be used for zone loosening for 30 to 32&rdquo; rows in most leg configurations. Heavy Category III wide hitch is standard on all models.</li>
<li>Spring loaded swivel coulter with fluted blade provides up to 1200 pounds of residue slicing pressure.</li>
<li>Each Leg is protected by six high quality replaceable wear surface parts.</li>
<li>Screw Jack Gauge Wheels and 1 x 3&rdquo; shanks with clamps (for bedding tools on the back bar) are included with selected&nbsp;models.</li>
</ul>


Paratill®

<p>Heavy double-bar frame with diamond mast is constructed with&nbsp;4x7x3/8&rdquo; front tube and spaced specifically for this application.</p>
<p>&bull; Front plow-out shanks are constructed from H-5160 alloy steel&nbsp;to stand up to the heaviest soil and stalk conditions. Ductile foot&nbsp;piece is pitch adjustable.</p>
<p>&bull; Choppers and bed conditioners are equipped with 1-1/2&rdquo; heavy&nbsp;pipe shafts and greaseable flange bearings.</p>
<p>&bull; Smooth faced rollers are constructed from steel pipe to roll beds&nbsp;flat. Scrapers are included as standard equipment for all models.</p>


PrepMaster®

<h3>MegaTill MAX Sub-Soilers</h3>
<p>Equipped with a heavy&nbsp;diamond mast frame to allow coulter and shank placement&nbsp;at virtually any row spacing. Category III 4&rdquo; drop&nbsp;hitch provides ground clearance for long shanks.</p>


MegaTill MAX

<table>
<tbody>
<tr>
<td>Model</td>
<td>Description</td>
</tr>
<tr>
<td>HT40F</td>
<td>12-Row, 38&Prime; or 40&Prime; or 16-Row 30&Prime; Spacing</td>
</tr>
<tr>
<td>HT36F</td>
<td>12-Row, 36&Prime; Row Spacing</td>
</tr>
<tr>
<td>HT32F</td>
<td>12-Row, 30&Prime; Row Spacing</td>
</tr>
<tr>
<td>HT27F</td>
<td>8-Row, 36&Prime;, 38&Prime; or 40&Prime; Row Spacing</td>
</tr>
<tr>
<td>HT26</td>
<td>10-Row, 30&Prime; Spacing or 8-Row 38&Prime; Spacing</td>
</tr>
<tr>
<td>HT21</td>
<td>8-Row, 30&Prime; Spacing or 6-Row 38&Prime; Spacing</td>
</tr>
</tbody>
</table>
<p></p>


Hipper Tumbler®

<table>
<tbody>
<tr>
<td>Model</td>
<td>Description</td>
</tr>
<tr>
<td>HR40F</td>
<td>12-Row, 38&Prime; or 40&Prime; or 16-Row 30&Prime; Spacing</td>
</tr>
<tr>
<td>HR36F</td>
<td>12-Row, 36&Prime; Row Spacing</td>
</tr>
<tr>
<td>HR32F</td>
<td>12-Row, 30&Prime; Row Spacing</td>
</tr>
<tr>
<td>HR27F</td>
<td>8-Row, 36&Prime;, 38&Prime; or 40&Prime; Row Spacing</td>
</tr>
<tr>
<td>HR26</td>
<td>10-Row, 30&Prime; Spacing or 8-Row 38&Prime; Spacing</td>
</tr>
<tr>
<td>HR21</td>
<td>8-Row, 30&Prime; Spacing or 6-Row 38&Prime; Spacing</td>
</tr>
<tr>
<td>HR6</td>
<td>2-Row, 30-38&Prime; Spacing, 16&Prime; Drum</td>
</tr>
</tbody>
</table>
<p></p>


Hipper Roller®

<table>
<tbody>
<tr>
<td>Model</td>
<td>Description</td>
</tr>
<tr>
<td>HC40F</td>
<td>12-Row, 38&Prime; or 40&Prime; or 16-Row 30&Prime; Spacing</td>
</tr>
<tr>
<td>HC36F</td>
<td>12-Row, 36&Prime; Row Spacing</td>
</tr>
<tr>
<td>HC32F</td>
<td>12-Row, 30&Prime; Row Spacing</td>
</tr>
<tr>
<td>HC27F</td>
<td>8-Row, 36&Prime;, 38&Prime; or 40&Prime; Row Spacing</td>
</tr>
<tr>
<td>HC26</td>
<td>10-Row, 30&Prime; Spacing or 8-Row 38&Prime; Spacing</td>
</tr>
<tr>
<td>HC21</td>
<td>8-Row, 30&Prime; Spacing or 6-Row 38&Prime; Spacing</td>
</tr>
</tbody>
</table>
<p></p>


Hipper Chopper®

<h3>Individual Gang Cultivating&nbsp;Widths:</h3>
<p>Description Straight Max. Angle</p>
<p>3-Spider Gang&hellip;&hellip;&hellip;71/2&rdquo;&hellip;&hellip;&hellip;111/2&rdquo;</p>
<p>4-Spider Gang&hellip;&hellip;..101/2&rdquo;&hellip;&hellip;..141/2&rdquo;</p>
<p>5-Spider Gang&hellip;&hellip;&hellip;.14&rdquo;&hellip;&hellip;&hellip;.173/4&rdquo;</p>
<p>3 Disc Gang&hellip;&hellip;&hellip;&hellip;&hellip;9&rdquo;&hellip;&hellip;&hellip;..141/4&rdquo;</p>
<p>4 Disc Gang&hellip;&hellip;&hellip;&hellip;..13&rdquo;&hellip;&hellip;&hellip;.173/4&rdquo;</p>
<h3>Row Spacings:</h3>
<p>3-spider rear gangs are generally used&nbsp;for row spacings 20&rdquo; to 32&rdquo;.</p>
<p>4-spider rear gangs are generally used&nbsp;for row spacings 30&rdquo; to 40&rdquo;.</p>
<p>5-spider rear gangs are generally used&nbsp;for row spacing 36&rdquo; or wider.</p>
<h3>Soil Penetration</h3>
<p>Variable by means of adjustable coil&nbsp;spring on each gang pipe.</p>
<h3>Tool Bars</h3>
<p>All Rolling Cultivators are equipped on&nbsp;7&times;7&rdquo; tool bars.</p>
<p>100&rdquo; Through 250&rdquo; tool bars are 1/4&rdquo; wall.</p>
<p>300&rdquo; and longer tool bars are 3/8&rdquo; wall.</p>
<p>Folding Tool Bars are equipped with&nbsp;cylinders and hoses.</p>


Lilliston® Rolling Cultivator®

<p>Your choice of rigid or spring loaded&nbsp;clamps:</p>
<ul>
<li>Economical two piece ductile clamp</li>
<li>Spring loaded clamp with heavy double&nbsp;springs for use in rocky ground.</li>
</ul>
<p>Heavy forged steel shank&nbsp;has 26&rdquo; of ground clearance &nbsp;for heavy trash.</p>
<p>Durable Bigham tool bars in rigid and folding models.</p>


Chisel Plow

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

Tillage

<h3>MegaTill HD Inter-Row Sub-Soilers</h3>
<p>Equipped on&nbsp;double bar frames with your choice of Double 4&times;4 or&nbsp;Double 4&times;7 lower tubes and Category III 4&rdquo; drop hitch.</p>
<p>Odd numbers of 36&rdquo; shanks and double bar reinforced&nbsp;clamps are included on MegaTill HD Inter-Row SubSoilers for placement in furrows. Coulters are not&nbsp;included.</p>
<h3>MegaTill HD Sub-Soilers</h3>
<p>Equipped with a heavy&nbsp;diamond mast frame to allow coulter and shank placement&nbsp;at virtually any row spacing. Category III 4&rdquo; drop&nbsp;hitch provides ground clearance for long shanks.</p>
<p>Even&nbsp;numbers of spring loaded swivel coulters and 36&rdquo; shanks&nbsp;with double bar reinforced clamp packages are included&nbsp;with all standard MegaTill Sub-Soilers to accommodate&nbsp;top of bed placement.</p>


MegaTill HD

<h3>Gang Operating Features:</h3>
<ul>
<li>Welded &ldquo;tab and slot&rdquo;&nbsp;frame for durability and reduced weight.</li>
<li>Optimized tool spacing.</li>
<li>Extended frame promotes maximum residue and soil flow between tillage components.</li>
<li>Only three grease zerks per row. Greasing interval is once each operating season.</li>
</ul>
<h3>Parallel Linkage:</h3>
<ul>
<li>3/4&rdquo; pivot bolts.</li>
<li>Polymer wear bushings keep the linkage assembly tight and never need greasing.</li>
<li>U-Bolt Rear Mount clamps give more vertical travel.</li>
<li>Wrap-around clamps keep gangs straight and prevent &ldquo;walking&rdquo; in side-draft conditions, and moves the gang forward, making the unit easier to lift.</li>
</ul>
<h3>Auto-Reset Linkage</h3>
<ul>
<li>Trips the gang in two dimensions when an obstruction is encountered.</li>
<li>Spring allows gang to rotate. Coulter amplifies action.</li>
<li>Gang resets automatically.</li>
</ul>
<h3>Front Coulter:</h3>
<ul>
<li>1-1/8&rdquo; Arbor Bolt</li>
<li>Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.</li>
<li>Choice of rigid or adjustable depth coulter with easy adjusting handle.</li>
<li>Optional scrapers</li>
</ul>
<h3>Super Duty Row Cleaner:</h3>
<ul>
<li>Heavy duty hubs with two disc bedder bearings stand up to tough soil conditions.</li>
<li>New notched discs clear residue in front of the tillage shank.</li>
<li>Twisted blades on right- and left-hand discs boost aggressive residue clearing.</li>
</ul>
<h3>Tillage Shank Options:</h3>
<ul>
<li>Wide variety of shanks to match your tillage and application requirements, all with fertilizer tubes standard.</li>
<li>Mole knives are available with standard wear cap items and optional heavy duty caps and tube protector shins.</li>
<li>Heavy optional shanks to meet deeper tillage and application requirements.</li>
</ul>
<h3>Rear Tillage Discs:</h3>
<ul>
<li>Choose the disc option that matches your Strip Till preference. Penetrate the tillage zone, close the &ldquo;shank slot,&rdquo; create a berm, or use disc bedders to form a bed.</li>
<li>Tillage discs are mounted on twisted flat shanks with a positive hexagon angle pitch</li>
<li>adjustment feature.</li>
<li>Each blade is adjustable vertically and laterally on the tool bar.</li>
</ul>
<h3>Rear Basket:</h3>
<ul>
<li>Basket weldment features 1-1/2&rdquo; shaft and flange bearings with triple lip seals.</li>
<li>Seals moisture, breaks up clods and prepares the seedbed.</li>
</ul>


Strip Till – Generation 3

<h3>Standard Features:</h3>
<ul>
<li>
<h4>Wide selection of mount brackets&nbsp;to fit any size tool bar.</h4>
</li>
<li>
<h4>Mount assembly features ratchet&nbsp;jack for quick and easy height&nbsp;adjustment.</h4>
</li>
<li>
<h4>Modular mount frame is constructed from 4x4x3/8&rdquo; tube.</h4>
</li>
<li>
<h4>All finishing tools are equipped&nbsp;with triple sealed greasable&nbsp;flange bearings.</h4>
</li>
</ul>
<h3><strong>Smooth Pipe Roller</strong></h3>
<p>Large diameter (16&rdquo;) pipe is used to construct the smooth roller. Larger pipe rolls up and over uneven&nbsp;terrain to leave a smooth, consistent surface. Surface residue may be flattened without burying stalks.</p>
<h3><strong>Spiked Roller</strong></h3>
<p>Mounted finishing tool equipped with 12-3/4&rdquo; pipe and 3/8 x 2-1/2 x 3-1/2&rdquo;&nbsp;teeth arranged in a spiral pattern across the roller. Flat spikes enhance&nbsp;positive rotation of the roller and partially mix surface residue with fresh soil.</p>
<p>This tool is popular behind a Paratill&reg;&nbsp;as a one pass preparation to plant wheat&nbsp;and other drilled crops.</p>
<h3>Basket (Spiral Blade Crumbler)</h3>
<p>Spiral blades on mounted basket aggressively engage the&nbsp;soil to break up clods, seal moisture and even incorporate&nbsp;chemicals. Basket leaves a surface condition to resist crusting&nbsp;and reduce soil and water erosion. Eight blades are spread&nbsp;over a 16&rdquo; diameter to operate in moist soil conditions.</p>
<h3><strong>Cultipacker</strong></h3>
<p>Cast rings float on a&nbsp;pipe to firm the surface&nbsp;over an uneven contour&nbsp;such as beds. Beds&nbsp;are maintained, and&nbsp;directional teeth on each&nbsp;ring pulverize clods and&nbsp;crimp stalks to the soil.</p>


Finishing Tools

<p><strong>Standard Features:</strong></p>
<ul>
<li>Heavy duty diamond mast frame has 4 x 7 x 3/8&rdquo; tube on the front bar. The same frame can be used for zone loosening for 30 to 32&rdquo; rows in most leg configurations. Heavy Category III wide hitch is standard on all models.</li>
<li>Spring loaded swivel coulter with fluted blade provides up to 1200 pounds of residue slicing pressure.</li>
<li>Each Leg is protected by three high quality replaceable wear surface parts.</li>
<li>Screw Jack Gauge Wheels and 1 x 3&rdquo; shanks with clamps (for bedding tools on the back bar) are included with selected&nbsp;models.</li>
</ul>


TerraTill®

<h3>V-Till Features</h3>
<ul>
<li>Heavy duty V-Frame is constructed from 7 x 7 x 3/8&rdquo; tube. Heavy&nbsp;welded Leg clamps space legs at optimum 26&rdquo; point centers for a&nbsp;consistent tillage across the width of the frame. Heavy Category&nbsp;III wide hitch is standard on all models.</li>
<li>Each Paratill Leg is protected by six high quality replaceable wear&nbsp;surface parts. Each clamp is equipped with a shear bolt to prevent&nbsp;damage when rocks or other obstructions are encountered.</li>
<li>Extra Heavy Duty Gauge Wheels are included with both models.&nbsp;Eight Leg machines include duals; Six Leg machines have&nbsp;singles.</li>
</ul>
<h3>Super Duty V-Till Features</h3>
<ul>
<li>Super Duty V-Till&reg;&nbsp;Frame is constructed from 7 x 7 x 1/2&rdquo;&nbsp;tube. Heavy welded frame is massive and can withstand&nbsp;the harshest soil and operating conditions. Heavy Category&nbsp;IV hitch is standard on all Super Duty models. Category III&nbsp;hitch may be substituted.</li>
<li>Each Paratill Leg is protected by six high quality replaceable&nbsp;wear surface parts, and equipped with a shear bolt to prevent&nbsp;damage when rocks or other obstructions are encountered.&nbsp;Leg clamps space legs at optimum 26&rdquo; point centers for a&nbsp;consistent tillage across the width of the frame.</li>
<li>Super Duty Gauge Wheels are included with all models. Super Duty Gauge Wheels feature eight bolt hubs with a&nbsp;static load capacity of 8000 lbs. each. Eight and Ten Leg&nbsp;machines include duals; Twelve Leg machines have singles&nbsp;and duals.</li>
</ul>
