<div>
<ul>
<li>Increased machine automation allows operator to focus their attention on the quality of the job.</li>
<li>Improves productivity through consistent, repeated optimized end turns across a field.</li>
</ul>
</div>


iTEC™ Pro iTEC™ Pro

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Guidance

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Use a Dealer-owned RTK network to reduce your administrative expenses</li>
<li>Provides less chance of radio interference, and RTK Extend to minimize shading signal loss</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation</li>
<li>Requires RTK subscription provided by your John Deere dealer or your own base station</li>
</ul>


Radio RTK 900

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>
<div></div>


Active Implement Guidance

<ul>
<li>An affordable and portable way to put precision ag to work for you</li>
<li>8.4-inch touchscreen provides easy-to-use experience</li>
<li>High-contrast screen allows you to see your display in bright sunlight, even on open station tractors</li>
<li>Basic documentation and AutoTrac come standard</li>
</ul>


4240 Universal Display

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Allows you to use RTK precision in difficult areas such as hilly terrain because there is no line-of-sight requirement to the base station.</li>
<li>No need to manually switch base stations as you move between fields — you can roam anywhere within the network and have access to the RTK correction signal.</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, RTK Ready Activation</li>
<li>Requires John Deere Mobile RTK subscription</li>
</ul>


RTK Mobile Correction Signal

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>


AutoTrac™ Implement Guidance

<ul>
<li>Faster pull-in time and improved performance in shaded conditions</li>
<li>Provides +/- 6 inch pass-to-pass accuracy</li>
<li>Options to upgrade for enhanced accuracy and longer term repeatability</li>
<li>Rapid Recovery feature can quickly re-acquire lost signals</li>
</ul>


StarFire™ 6000 with SF1 Receiver

<ul>
<li>Paddle sensor mounted on front wheel</li>
<li>For late, post-emerge applications</li>
<li>Approved for 30-in to 40 in (76 cm-101.6 cm) corn</li>
<li>For all 4 Series Sprayers</li>
</ul>


AutoTrac™ RowSense™ - Sprayer AutoTrac™ RowSense™ - Sprayer

AutoTrac™ RowSense™ – Sprayer AutoTrac™ RowSense™ – Sprayer

<p>Realize the benefits of AutoTrac on Non-Deere machines.</p>
<ul>
<li>Make long days easier with equipment and technology that works together for you.</li>
<li>Increase productivity by being able to cover more ground.</li>
<li>Reduce overlap and maximize inputs.</li>
<li>Reduce fatigue and improve operator experience</li>
</ul>


AutoTrac™ Controller

<ul>
<li>RTK-like accuracy &#8211; 2.5 cm pass to pass repeatability</li>
<li>SF-RTK achieves 75% faster pull-in times, compared to SF3 signal</li>
<li>Guaranteed 5-year repeatability, season to season</li>
<li>Drop-in replacement for StarFire™ 6000 receiver</li>
</ul>


StarFire™ 7000 Receiver with SF-RTK Signal

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Precision Ag Technology

<div>
<ul>
<li>View on-the-go harvest information for potatoes, onions, sugar beets, and other specialty crops.</li>
<li>Transfer your data into John Deere Operations Center to make better decisions.</li>
</ul>
</div>


Yield Documentation Specialty Crops

<div>
<ul>
<li>Automate scraper adjustments to form land based upon water management software recommendations</li>
<li>Take advantage of plane control, grade control, and cross-slope compensation to achieve desired land forming results</li>
<li>Utilize horizontal RTK level accuracy without the need for additional laser guidance corrections</li>
</ul>
</div>


iGrade™

<div>
<ul>
<li>On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar</li>
<li>Automatically adjust inoculant dosage based on current dry matter level</li>
<li>Automatically adjust length-of-cut, on the go</li>
<li>The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.</li>
<li>Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.</li>
</ul>
</div>


John Deere HarvestLab™ 3000 HarvestLab™ and Constituent Sensing

<div>
<ul>
<li>Improve asset utilization by electronically assigning work orders to application equipment.</li>
<li>Make better scheduling decisions by seeing the entire equipment fleet on a single map.</li>
<li>Use advanced reporting to analyze machine and operator performance.</li>
</ul>
</div>


AgLogic™

<div>
<ul>
<li>Reduce the cost of having to purchase multiple rate controllers by controlling both liquid and dry products simultaneously with a single controller.</li>
<li>Provides a common rate controller and user interface across multiple machine and implement types including multi-tank air carts, direct injection systems, and dual-boom and tiered-boom systems.</li>
</ul>
</div>
<div></div>


John Deere Rate Controller 2000

Technology Products

<div>
       
       <ol>
        <li>Headland – iTEC Pro</li>
        <li>Turn pattern</li>
        <li>Main field – AutoTrac™ steering system</li>
        <li>Headland boundary</li>
        <li>Field boundary</li>
       </ol>
       <p> </p>
       <p>iTEC Pro stands for Intelligent Total Equipment Control. Compatible with the GreenStar™ 3 or GreenStar 2 system. iTEC Pro is the next step toward complete tractor automation and works with SF1, SF2, or RTK accuracy levels. </p>
       <p>This innovative solution coordinates machine and implement functions with end turns by utilizing the GreenStar 3 2630, or GreenStar 2 2600 Display, as well as the StarFire™ 3000 Receiver, or StarFire iTC Receiver. As illustrated in the diagram above, by knowing the location of the machine, the location of the boundaries, and a sequence of functions, iTEC Pro enables operators to automate many in-cab tasks. By automating these functions, the machine and implement functions can perform consistently on headlands or internal boundaries.<br><br>When paired with AutoTrac, this system accurately guides the tractor around an optimal end of row that is configured based on implement and machine dimensions input into the display.<br><br>By automating these tasks, this system also correctly positions the machine and implement for the next field pass to increase accuracy and efficiency. Operating at optimal speeds with correct implement functions happening, when programmed, is all made easy with iTEC Pro.<br><br>iTEC Pro helps growers reach a higher level of precision and efficiency. </p>
       <p>iTEC Pro also reduces <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/ams/2022/feature/autotrac/itec_pro/operator.html">operator fatigue</a> and increases <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/ams/2022/feature/autotrac/itec_pro/efficiency.html">efficiency</a>.</p>
       <p> </p>
       <p>Once they have experienced it, they will not want to turn around without it. There is no better way to start the experience than with an iTEC Pro demonstration.</p>
      </div>

Provides total equipment control

<div>
       
       <p>iTEC Pro automatically guides the tractor around the optimum pass and carries out end-of-row functions at appropriate times during the sequence. This functionality reduces input costs and reduces strain on the operator.</p>
       <p> </p>
       <p>When operators spend their workday manually steering a tractor and implement around during an end-of-row turn while also watching for obstacles and executing end-of-row functions such as raising the planter and down shifting the tractor, they tend to get tired. This causes headland inconsistencies.</p>
       <p> </p>
       <p>iTEC Pro offers many benefits to the operator:</p>
       <ul>
        <li>Ability to watch the tractor and implement more closely to maintenance parts, allowing for proactive measures rather than reactive fixes</li>
        <li>Ability to more closely watch for damaging obstacles such as rocks, washouts, or holes caused by broken tile lines</li>
        <li>Increased productivity through faster, more efficient end turns</li>
       </ul>
       <p>All of these benefits result in more uptime for the equipment and an operator who is more alert at the end of the day.</p>
      </div>

Reduces operator fatigue

<div>
       
       <p>A potential reduction in headland or internal boundary overlaps and skips may not sound like much at first, but operators who add it up acre after acre could be looking at a substantial savings potential with iTEC Pro.</p>
       <p> </p>
       <p>The more irregularly shaped the fields and the more headland turns there are, the quicker iTEC Pro adds up the savings. Using iTEC Pro allows operators to perform faster, more efficient, hands-free headland turns with a consistency that is hard to match, no matter the field conditions or experience level of the operator.</p>
       <p> </p>
       <p>When dialed in, iTEC Pro performs consistently and accurately. This increases in-field efficiency by saving operators money and time.</p>
      </div>