<ul>
<li>Available factory-installed on 6R, 7-210R and 7-230R Tractors</li>
<li>Comes with documentation in base price</li>
<li>Easily add and change features as your needs change</li>
<li>Permanent, non-transferable AutoTrac activation optional</li>
</ul>


4200 CommandCenter™ Display

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Guidance

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Use a Dealer-owned RTK network to reduce your administrative expenses</li>
<li>Provides less chance of radio interference, and RTK Extend to minimize shading signal loss</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation</li>
<li>Requires RTK subscription provided by your John Deere dealer or your own base station</li>
</ul>


Radio RTK 900

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>
<div></div>


Active Implement Guidance

<ul>
<li>An affordable and portable way to put precision ag to work for you</li>
<li>8.4-inch touchscreen provides easy-to-use experience</li>
<li>High-contrast screen allows you to see your display in bright sunlight, even on open station tractors</li>
<li>Basic documentation and AutoTrac come standard</li>
</ul>


4240 Universal Display

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Allows you to use RTK precision in difficult areas such as hilly terrain because there is no line-of-sight requirement to the base station.</li>
<li>No need to manually switch base stations as you move between fields — you can roam anywhere within the network and have access to the RTK correction signal.</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, RTK Ready Activation</li>
<li>Requires John Deere Mobile RTK subscription</li>
</ul>


RTK Mobile Correction Signal

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>


AutoTrac™ Implement Guidance

<ul>
<li>Faster pull-in time and improved performance in shaded conditions</li>
<li>Provides +/- 6 inch pass-to-pass accuracy</li>
<li>Options to upgrade for enhanced accuracy and longer term repeatability</li>
<li>Rapid Recovery feature can quickly re-acquire lost signals</li>
</ul>


StarFire™ 6000 with SF1 Receiver

<ul>
<li>Paddle sensor mounted on front wheel</li>
<li>For late, post-emerge applications</li>
<li>Approved for 30-in to 40 in (76 cm-101.6 cm) corn</li>
<li>For all 4 Series Sprayers</li>
</ul>


AutoTrac™ RowSense™ - Sprayer AutoTrac™ RowSense™ - Sprayer

AutoTrac™ RowSense™ – Sprayer AutoTrac™ RowSense™ – Sprayer

<p>Realize the benefits of AutoTrac on Non-Deere machines.</p>
<ul>
<li>Make long days easier with equipment and technology that works together for you.</li>
<li>Increase productivity by being able to cover more ground.</li>
<li>Reduce overlap and maximize inputs.</li>
<li>Reduce fatigue and improve operator experience</li>
</ul>


AutoTrac™ Controller

<ul>
<li>RTK-like accuracy &#8211; 2.5 cm pass to pass repeatability</li>
<li>SF-RTK achieves 75% faster pull-in times, compared to SF3 signal</li>
<li>Guaranteed 5-year repeatability, season to season</li>
<li>Drop-in replacement for StarFire™ 6000 receiver</li>
</ul>


StarFire™ 7000 Receiver with SF-RTK Signal

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Precision Ag Technology

<div>
<ul>
<li>View on-the-go harvest information for potatoes, onions, sugar beets, and other specialty crops.</li>
<li>Transfer your data into John Deere Operations Center to make better decisions.</li>
</ul>
</div>


Yield Documentation Specialty Crops

<div>
<ul>
<li>Automate scraper adjustments to form land based upon water management software recommendations</li>
<li>Take advantage of plane control, grade control, and cross-slope compensation to achieve desired land forming results</li>
<li>Utilize horizontal RTK level accuracy without the need for additional laser guidance corrections</li>
</ul>
</div>


iGrade™

<div>
<ul>
<li>On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar</li>
<li>Automatically adjust inoculant dosage based on current dry matter level</li>
<li>Automatically adjust length-of-cut, on the go</li>
<li>The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.</li>
<li>Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.</li>
</ul>
</div>


John Deere HarvestLab™ 3000 HarvestLab™ and Constituent Sensing

<div>
<ul>
<li>Improve asset utilization by electronically assigning work orders to application equipment.</li>
<li>Make better scheduling decisions by seeing the entire equipment fleet on a single map.</li>
<li>Use advanced reporting to analyze machine and operator performance.</li>
</ul>
</div>


AgLogic™

<div>
<ul>
<li>Reduce the cost of having to purchase multiple rate controllers by controlling both liquid and dry products simultaneously with a single controller.</li>
<li>Provides a common rate controller and user interface across multiple machine and implement types including multi-tank air carts, direct injection systems, and dual-boom and tiered-boom systems.</li>
</ul>
</div>
<div></div>


John Deere Rate Controller 2000

Technology Products

<div>
       
       <p>The 4200 CommandCenter ships from the factory with these three features included with the display and machine purchase so that you can easily take the first steps on your precision ag journey:</p>
       <ul>
        <li>AutoTrac™ guidance</li>
        <li>Documentation</li>
        <li>Data Sync</li>
       </ul>
       <p>Combine the display with a StarFire™ Receiver, and you are ready to get started with automated guidance by creating maps showing work completed and, if you have JDLink™, wirelessly sending your data to the John Deere Operations Center. If you don’t need automated steering, you can deduct AutoTrac when ordering your machine. If you want to do even more, you can add a 4200 CommandCenter Section Control Activation for precision control of crop inputs.<br><br><em>NOTE: You will need an AutoTrac activation to use the Section Control functionality with a 4200 CommandCenter display.  </em></p>
       <p><em> </em></p>
      </div>

Get started easier with John Deere precision ag and the 4200 CommandCenter™

<div>
       
       <p>Sometimes a job on the farm does not require intense Precision Ag management practices. When this is the case, the 4200 CommandCenter™ is just the tool for the job. The 4200 offers the ability to run core Precision Ag features like AutoTrac™ guidance, Documentation, Section Control, and Data Sync.<br><br>There are two levels of activations that can be ordered on the 4200. The first is the CommandCenter AutoTrac Activation, enabling operators to consistently drive the same guidance path pass to pass. The second is the 4200 Section Control Activation plus CommandCenter AutoTrac Activation. This combines the ability to use AutoTrac on a machine with the value of Section Control, eliminating overlap on critical field operations.<br><br>Data Sync enables operators to automatically send data to John Deere Operations Center. Producers can analyze the data from completed fields or view where field work is in process, making it easier for them to make operational decisions. Data is available to analyze through the John Deere Operations Center from any internet-connected device, allowing producers to make important production decisions and giving operations the ability to invoice work recently completed.</p>
       <p><em> </em></p>
      </div>

Why 4200 CommandCenter™ is the right tool for the job

<div>
       
       <p dir="LTR" align="LEFT">The Generation 4 CommandCenter was designed to provide a consistent user experience by providing full screen viewing of more run page modules, shortcut keys, and precision agriculture capabilities.<br><br>Expect easier setup, along with increased operator confidence thanks to a simple, customizable interface. The improved design of the Generation 4 CommandCenter also aids in an optimal operating experience and maximizes uptime.<br><br>In order to increase your efficiency, take advantage of the following features offered by the Generation 4 CommandCenter:</p>
       <h5>Layout Manager</h5>
       
       <ul>
        <li>Easily create page views that meet user needs and that are also equipped with default run pages.</li>
       </ul>
       <h5>Language and units</h5>
       
       <p>Easily switch between languages with the option to set the active and alternate language. Configure the shortcut bar to include the language toggle allows different individuals to easily switch the display between languages.</p>
       <h5>Users and access</h5>
       
       <p>Users and access allow the owner or manager to lock out certain functions to prevent operators from accessing or changing settings. Lock-out functions are managed with a defined pin for the administrator.<br><br>The Generation 4 CommandCenter can be set to one of two profiles, administrator or operator. The administrator profile is always set to the full access group. This group allows unlimited access to all the features and can lock and unlock features in the operator profile.</p>
       <h5>Machine Monitor</h5>
       
       <ul>
        <li>The Machine Monitor application provides you instantaneous readings about the status or condition of your machine.</li>
        <ul>
         <li>This application shows parameters such as engine speed, coolant temperature, and ground speed.</li>
        </ul>
       </ul>
       <h5>Work Monitor</h5>
       
       <ul>
        <li>The Work Monitor application displays performance information about the task being performed by the machine.</li>
        <ul>
         <li>You are shown averages, totals, and productivity of the machine, such as area worked, average working speed, and fuel usage.</li>
         <li>Work set up places the settings needed to properly setup features such as AutoTrac™ guidance, Documentation, and Section Control in a single location. Settings include:</li>
         <ul>
          <li>Client, farm, and field</li>
          <li>Crop type</li>
          <li>Machine and implement dimensions</li>
          <li>Variety/hybrid and planting/seeding rates</li>
          <li>Variable rate prescriptions</li>
          <li>Product and application rates</li>
          <li>Application rates through the implement screens</li>
         </ul>
        </ul>
       </ul>
       <h5>Operator's Manual</h5>
       
       <p>Stay up to date on the latest Gen 4 features and enhancements with the Gen 4 Operator’s Manual at the user’s fingertips. With each bundle update, the Gen 4 display automatically receives the latest Gen 4 Operator’s Manual which means less time locating a paper copy and ensuring the most up-to-date information is always available.</p>
       <h5>Video capability</h5>
       
       <p>The video application on 4600 CommandCenter and 4640 Universal Display has been redesigned to improve user interface and prepare for future enhancements. Features include the ability to name and configure cameras for viewing and scanning.</p>
       <ul>
        <li>Machines equipped with a 4200 CommandCenter are equipped with one video input, and the 4600 CommandCenter has four video inputs.
         <ul>
          <li>You can set a variety of triggers. With each trigger, the image appears on the display.</li>
         </ul></li>
       </ul>
       <h5>Flags</h5>
       
       <ul>
        <li>Mark areas in the field that need special attention such as rocks, tile lines, or weed pressure.
         <ul>
          <li>Flags previously recorded on the Gen 4 or GreenStar™ 3 2630 Display can be transferred between monitors.<strong><strong><br></strong></strong></li>
         </ul></li>
       </ul>
       <h5>Field boundaries</h5>
       
       <ul>
        <li>Manually drive field boundaries with the Generation 4 CommandCenter or import existing boundary information from the GreenStar 3 2630 Display or John Deere Operations Center. Gen 4 documentation data can be used to create boundaries from coverage within the John Deere Operations Center.</li>
       </ul>
       <h5>Automatic base station switching</h5>
       
       <ul>
        <li>Producers using John Deere RTK Radio 450 or 900 can link a base station to a desired client, farm, or field. This allows automatic switching to the associated base station when changing fields. The ability to import base station assignments into Operations Center and send back to machines will be available at a later date.</li>
       </ul>
       <h5>Dual-display mode</h5>
       
       <ul>
        <li>Generation 4 CommandCenter may be configured to run with the following John Deere displays connected at the cornerpost of a John Deere tractor:</li>
        <ul>
         <li>GreenStar 2 1800 Display</li>
         <li>GreenStar 2 2600 Display</li>
         <li>GreenStar 3 2630 Display</li>
         <li>4640 Universal Display</li>
         <li>4240 Universal Display</li>
        </ul>
       </ul>
       <p><em>NOTE: Vehicle applications are always located on the Gen 4 CommandCenter.</em></p>
      </div>

Take advantage of the Generation 4 CommandCenter™ display, designed for efficiency

<div>
       
       <p>The  ability to remotely view the machine’s settings, performance, yield, acres, and other information is highly valuable when managing or supervising an operation. It is imperative that your equipment keeps running productively and that you are enabled to provide remote support to improve the quality and efficiency of work while saving time and money. RDA enables you to get help with machine settings or identify a problem and receive assistance in navigating through the steps needed to resolve the issue.<br><br>Value of RDA:</p>
       <ul>
        <li>Improved confidence in precision farming applications for all operators</li>
        <li>Increased productivity with quicker problem resolution</li>
        <li>Improved service from John Deere dealer and support personnel</li>
        <li>Increased profitability by keeping equipment moving</li>
        <li>Reduced labor and travel costs</li>
        <li>With the 19-1 software update, the Gen 4 displays no longer require the operator to accept for remote view</li>
       </ul>
       
       
      </div>

Remotely view machine information with Remote Display Access (RDA)

<div>
       
       <p>Gen 4 applications and subscriptions allow data to be transferred from the display to the John Deere Operations Center for job reporting and analysis using Wireless Data Transfer (WDT) or Data Sync.</p>
       <ul>
        <li>With WDT, you can manually send data to the John Deere Operations Center for review.</li>
        <li>Data Sync automatically sends your data to the Operations Center, avoiding the need for manually exporting the data. </li>
       </ul>
       <p>Wirelessly sending data helps you save time and money while increasing productivity. Wirelessly transfer setup, prescription, and documentation files securely between office, mobile devices, and 4640/4240 Universal Display or 4600/4200 CommandCenter™ Display, eliminating the need for USB transfer. This increases your uptime and productivity, reduces the risk of data loss, and enables easy data sharing and more timely decision making.<br><br>Through the John Deere Operations Center, you are in control and can easily share files with a John Deere dealer and other trusted advisers.<br><br><em>NOTE: For users in areas of poor cellular coverage, data can be exported using a USB flash drive.</em></p>
      </div>

Reduce the risk of data loss by wirelessly sending and receiving data

<div>
       
       <p>The Generation 4 CommandCenter™ and Gen 4 Universal Displays display are an AEF ISOBUS compatible display.<br><br>An easy plug and play between implements, displays, tractors, and other products is required today in daily business. This is why within agriculture and forestry, an industry standard, ISOBUS, is used for communication between these products.</p>
       
       <p>From the ag industry, the Agricultural Industry Electronics Foundation (AEF) was initiated in 2008 to have a common forum among manufacturers to define the ISOBUS standard further, define and conduct ISOBUS tests, accelerate adoption, label compatible products, and to communicate this to dealers and customers. John Deere is one of the seven founding members of AEF and is very engaged in the organization.<br><br>To better ensure ISOBUS compatibility, the AEF developed new functionalities, i.e., auxiliaries (AUX) and Task Controller Section Control (TC-SC,) in addition to the well-known universal terminal (UT). They are also the basis for the certification of ISOBUS products. An ISOBUS functionality can be described as an independent ISOBUS product and the concept is extendable for later additions of functionalities.<br><br>Gen 4 CommandCenter and Gen 4 Universal Displays support the following ISOBUS features:</p>
       <ul>
        <li>4600/4200 CommandCenter and 4640/4240 Universal Display:
         <ul>
          <li>Universal Terminal (UT)<br>-&gt; ISOBUS sprayer, seeder, planter, fertilizer spreader, manure applicator, and many other implements can be operated through the UT functionality.</li>
          <li>Task Controller Section Control (TC-SC)<br>-&gt; With TC-SC, ISOBUS compliant implements like sprayers, seeders, planters, fertilizer spreaders, and manure tankers can be used with automatic Section Control.</li>
          <li>Task Controller Basic (TC-Bas)<br>-&gt; With TC-Bas, documentation with ISOBUS compliant implements in the standard data format of ISOXML is possible. Also, totals like area, amount, etc. are recorded directly from the implement.</li>
          <li>Task Controller geo-based (TC-Geo)<br>-&gt; With TC-Geo, location-based documentation with ISOBUS compliant implements in the standard data format of ISOXML is possible. Also, Client, Farm, Field, Boundary, Products, Crops (incl. Varieties), Prescriptions, Operators, Tasks, Comments are recorded directly from the implement.</li>
          <li>Auxiliary Control (AUX-N)<br>-&gt; With AUX-N, additional control elements that facilitate the operation of complex equipment, such as a joystick; also, the capability of controlling implement functions by means of an additional control element.</li>
         </ul></li>
       </ul>
       
       <p>To stay up to speed on which implement and product complies with which ISOBUS features, please visit the <a href="http://www.aef-online.org/">AEF website</a> and sign up for the database. It combines tractor, sprayer, and display combination to determine compatibility.</p>
       
      </div>

Enable tractor-implement communication through AEF ISOBUS TC-SC compatibility

<div>
       
       <p>Over-the-air activations were enabled with the 18-1 software update to the Gen 4 displays. With that software update or newer, a John Deere dealer can send activations to a Gen 4 display without leaving the office. Over-the-air activations also eliminate the need to manually enter long activation codes like was done previously. This also eliminates multiple trips between the cab and the farm office to enter codes and verify completion.<br><br><em>NOTE: Over-the-air activations requires a current JDLink</em><em>™ Connect subscription and Mobile Telematics Gateway (MTG). Planter and platform activations and subscriptions cannot be updated over-the-air.</em></p>
      </div>