<ul>
<li>36 ft. (11 m) cut width&nbsp;</li>
<li>Compatible with W200M, W235M, W235R and W260R</li>
<li>Hydraulic tilt John Deere cutter bar</li>
<li>Ground speed matching</li>
<li>Integrated controls</li>
</ul>


D636 Draper

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Hay and Forage

<ul>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel </li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Provides a uniform cut with ground-following gauge wheels</li>
</ul>


1415D Draper Platforms

<ul>
<li>Cutterbar and frame profile gives uninterrupted crop flow</li>
<li>Strong, positive-feeding reel handles all crop conditions</li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Gauge wheels provide ground following for uniform cut</li>
</ul>


435D Draper

<ul>
<li>Structural, tubular frame</li>
<li>Hitch connects quickly and easily</li>
<li>Easy hydraulic operation</li>
</ul>


BU10 Series Bale Unroller

<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>


F310R Front Mount Mower-Conditioner

<ul>
<li>Compatible with 7, 8, 9, and 0 Series Balers</li>
<li>Carries 4&#215;6&#8242; bales</li>
<li>Transport width same as baler</li>
<li>Drop 1, 2, or 3 bales at a time</li>
</ul>


Plus2™ A420R Accumulator

<ul>
<li>Full-width feeding pickup</li>
<li>540-rpm PTO power shaft</li>
<li>Deep-flighted auger feeding</li>
<li>Hydraulic bale tension available</li>
</ul>


338 Twine/Wire Baler

<ul>
<li>Small drum cutting</li>
<li>Small drum gathering</li>
<li>Advanced header-height control</li>
<li>Row scrapers and cleaners prevent crop building</li>
</ul>


692 Rotary Harvesting Unit

Hay and Forage Mowing Equipment

<ul>
<li>In 30 minutes or less, you can switch from a rotary head to a 500D Draper head, which means you can harvest small grains and hay with one traction unit.</li>
<li>Quick-change reel teeth can be removed and replaced with minimal effort and tools. Then it’s back to cutting.</li>
<li>Fully integrated controls to the draper means no need for a secondary control box.</li>
</ul>


536D Draper

F350R Front Mount Mower-Conditioner

<ul>
<li>200hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24 mph transport speed</li>
</ul>


W200M Windrower

<ul>
<li>Rope System transport latch</li>
<li>Quick-remove shear hub assembly</li>
<li>DM5050 &#038; 5060 iMatch and Quick Coupler compatible</li>
<li>DM5070 Cat. 2 Quick Coupler compatible</li>
</ul>


DM50 Series Disc Mowers

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>


S250 Mower-Conditioner

<ul>
<li>John Deere-designed rotary cutterbar</li>
<li>Patented diagonally cut module</li>
<li>Hydraulic cutterbar angle adjustment</li>
<li>Adjustable impeller conditioning hood</li>
</ul>


995 Rotary Platform

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Windrowers and Draper Platforms

180A Auger Platform

1425D Draper Platforms

<ul>
<li>Greater capacity to process crop with 8-inch deeper belts </li>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel</li>
<li>Excellent visibility to cutterbar and belt</li>
</ul>


1445D Draper Platforms

<div>
       
       <p>D600 Draper has an interchangeable rotary platform:</p>
       <ul>
        <li>Interchangeable on W200M and R Series units in 30 minutes or less</li>
        <li>Growers can use one traction unit for harvesting both small grains and hay</li>
       </ul>
      </div>

Interchangeable with John Deere rotary platforms

<div>
       <h5>Center-driven belts</h5>
       
       <ul>
        <li>Deliver increased torque</li>
        <li>Enable greater productivity with minimal belt slippage</li>
        <li>Increase performance in heavy crop conditions</li>
       </ul>
       
       
       <ul>
        <li>Draper belts on the D600 are driven from the center of the platform
         <ul>
          <li>Delivers increased belt performance compared to drapers with end-driven belts</li>
         </ul></li>
       </ul>
       <h5>Belt drive motors</h5>
       
       <p>Due to the motors pulling the belt (instead of pushing in an end drive system), there is less slack in the belt. This delivers an increase in belt torque.</p>
       <p> </p>
       <p>As a result, producers experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.</p>
      </div>

Higher productivity with center-driven belts

<div>
       
       <p>The D600 Series includes an improved reel that increases durability in heavy crop conditions. The dual drive offers more versatility for operators to match their crop conditions and offers more reel torque for heavy crop conditions. The system can be quickly reconfigured by changing quick couplers to offer a series configuration for a higher reel speed to meet the needs of lighter crop conditions.</p>
       <p> </p>
       <p>The cam reel allows the reel to efficiently lift crop across the cutterbar and release it onto the draper belts.</p>
       <h5>D600 Draper teeth</h5>
       
       <ul>
        <li>Easy reel tooth replacement is done with a 90-degree turn using a wrench. It allows the reel tooth to be removed and replaced.</li>
        <li>Additional teeth can be added at any location along the extruded tooth bar.</li>
       </ul>
      </div>

Strong, positive-feeding reel handles all crop conditions

<div>
       
       <p>Sales, parts, and service support from a local John Deere dealer offers overnight parts delivery and a well-trained support staff.</p>
      </div>

John Deere parts and service support provide uptime for a timely harvest

<div>
       
       <p>The draper hydraulic pump control adjusts knife, belt, and reel speeds to match the ground speed. This provides consistent feeding as you move through the field.</p>
      </div>

Draper hydraulic pump control logic delivers constant header speed

<div>
       
       <p>John Deere D625, D630, and D636 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).</p>
       <ul>
        <li>Larger windrows to match combine or self-propelled forage harvester</li>
        <li>Match narrower-width drapers with higher-capacity harvesting</li>
        <li>Place higher-density windrows in front of harvesters when yields are low</li>
        <li>Discharge two windrows side by side for uniform combine or forage harvester feeding</li>
       </ul>
       
       
       
      </div>

Specifications
Cutterbar - Type	Dual knife
Cut width (length)	6.1 m20 ft
Reel type	Pick up cam four-position adjustable release
Fingers	HD Plastic
Belt width	Wide rubber skim-coated 710-ml (24-oz) drapers: 1,067 mm41.6 in.
Platform length	6.5 m21.3 ft
Overall operating depth	With crop dividers 2.6 m21.3 ft
Transport width, field position	6.5 m21.3 ft
Transport width on wheel, less dividers	2.5 m8.1 ft
Type	Dual knife
Cut width (length)	6.1 m20 ft
Knife drive	Hydraulic motor to enclosed heavy-duty wobble box
Knife speed	700-850 cycles/min1,400-1,700 spm
Cutterbar tilt	Standard hydraulicOptional mechanical (7.5 to 17.0 degree lift)
Reel type	Pick up cam four-position adjustable release
Number of bats	6 bats standard9 bats optional, single span, capped ends
Fingers	HD Plastic
Diameter	1,650 mm65 in.
Height control	Hydraulic
Speed control	Hydraulic with header index
Reel lift	Hydraulic
Reel fore and aft	Hydraulic
Operating speeds	0-85 rpm
Belt width	Wide rubber skim-coated 710-ml (24-oz) drapers: 1,067 mm41.6 in.
Operating speed	0-225 m/min0-742 fpm
Speed control	Hydraulic from cab
Header height sensing on the ground	Float springs on traction unit
Header height sensing off the ground	Return to cut height standardGauge wheels optional
Platform length	6.5 m21.3 ft
Overall operating depth	With crop dividers 2.6 m8.7 ft
Transport width, field position	6.5 m21.3 ft
Transport width on wheel, less dividers	2.5 m8.1 ft
Transport length, hitch extended	----
Approximate weight (base platform with reel)	1,544 kg3,400 lb
Center opening width between belts	1,720-1,950 mm67.1-76.7 in.