<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Hay and Forage

<ul>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel </li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Provides a uniform cut with ground-following gauge wheels</li>
</ul>


1415D Draper Platforms

<ul>
<li>Cutterbar and frame profile gives uninterrupted crop flow</li>
<li>Strong, positive-feeding reel handles all crop conditions</li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Gauge wheels provide ground following for uniform cut</li>
</ul>


435D Draper

<ul>
<li>Structural, tubular frame</li>
<li>Hitch connects quickly and easily</li>
<li>Easy hydraulic operation</li>
</ul>


BU10 Series Bale Unroller

<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>


F310R Front Mount Mower-Conditioner

<ul>
<li>Compatible with 7, 8, 9, and 0 Series Balers</li>
<li>Carries 4&#215;6&#8242; bales</li>
<li>Transport width same as baler</li>
<li>Drop 1, 2, or 3 bales at a time</li>
</ul>


Plus2™ A420R Accumulator

<ul>
<li>Full-width feeding pickup</li>
<li>540-rpm PTO power shaft</li>
<li>Deep-flighted auger feeding</li>
<li>Hydraulic bale tension available</li>
</ul>


338 Twine/Wire Baler

<ul>
<li>Small drum cutting</li>
<li>Small drum gathering</li>
<li>Advanced header-height control</li>
<li>Row scrapers and cleaners prevent crop building</li>
</ul>


692 Rotary Harvesting Unit

Hay and Forage Mowing Equipment

<ul>
<li>In 30 minutes or less, you can switch from a rotary head to a 500D Draper head, which means you can harvest small grains and hay with one traction unit.</li>
<li>Quick-change reel teeth can be removed and replaced with minimal effort and tools. Then it’s back to cutting.</li>
<li>Fully integrated controls to the draper means no need for a secondary control box.</li>
</ul>


536D Draper

F350R Front Mount Mower-Conditioner

<ul>
<li>200hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24 mph transport speed</li>
</ul>


W200M Windrower

<ul>
<li>Rope System transport latch</li>
<li>Quick-remove shear hub assembly</li>
<li>DM5050 &#038; 5060 iMatch and Quick Coupler compatible</li>
<li>DM5070 Cat. 2 Quick Coupler compatible</li>
</ul>


DM50 Series Disc Mowers

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>


S250 Mower-Conditioner

<ul>
<li>John Deere-designed rotary cutterbar</li>
<li>Patented diagonally cut module</li>
<li>Hydraulic cutterbar angle adjustment</li>
<li>Adjustable impeller conditioning hood</li>
</ul>


995 Rotary Platform

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Windrowers and Draper Platforms

180A Auger Platform

<ul>
<li>36 ft. (11 m) cut width&nbsp;</li>
<li>Compatible with W200M, W235M, W235R and W260R</li>
<li>Hydraulic tilt John Deere cutter bar</li>
<li>Ground speed matching</li>
<li>Integrated controls</li>
</ul>


D636 Draper

1425D Draper Platforms

<ul>
<li>Greater capacity to process crop with 8-inch deeper belts </li>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel</li>
<li>Excellent visibility to cutterbar and belt</li>
</ul>


1445D Draper Platforms

View Product Brochure

<div>
       
       <p>The 100A Windrower Platforms have a twin-knife design.</p>
       <p> </p>
       <p>The twin-knife design uses two counter-stroking knives with two sections that overlap in the center of the platform. The advantages of this design are as follows:</p>
       <ul>
        <li>Reduces cutting loads for increased reliability</li>
        <li>Easier to remove and handle short knives for normal maintenance</li>
        <li>Adjustable from 1400 to 1950 strokes per minute for clean cutting at productive ground speeds</li>
        <li>Counter-stroking reduces vibration</li>
       </ul>
       <p>The Z-shaped profile of the cutterbar, along with rectangular reinforcement, improves the durability of the cutterbar along both the horizontal and vertical planes, allowing it to better withstand impact from field obstacles.</p>
      </div>

Heavy-duty knife drive and cutterbar for increased reliability

<div>
       
       <p>The 100A Windrower Platforms are built to meet the needs of a large producer or commercial hay grower.<br><br> Large-diameter, 6.35 mm (1/4-in.) reel teeth are stiff enough to maintain control of the crop from the cutterbar to the augers for even feeding, especially in heavy crop conditions. The teeth nearest to the reel cam are formed to improve crop flow by the reel ends.<br><br>The operator can easily control the reel speed from 15 rpm to 85 rpm.<br><br> The teeth are designed to lift lodged and tangled material, then draw it against the cutterbar for close, clean cutting in any direction.</p>
       
       <p>Reel bats are made of oval tubing. The oval-tube reel bats increase the rigidity and strength of the reel.<br><br>The bats are equipped with end caps and remain free from foreign material, reducing unnecessary loads on the reel.<br><br>Standard 100A Windrower Platforms feature six bat reels. The 160A Grass Seed Windrower Platforms feature a seven-bat reel.</p>
      </div>

Heavy-duty, multi-bat reel improves crop flow

<div>
       
       <p>The reel cam is easily adjusted to match crop release to varying crop conditions, such as light to heavy crop.</p>
       <p> </p>
       <p>Cam-forward reel-tine control reduces the load on bearings and cam track for quieter, smoother operation and longer life. The higher position of the cam itself helps to keep it above the crop and away from debris. The smoother operation allows for operation speeds of up to 13 km/h (8 mph).</p>
      </div>

Adjustable reel-cam track to control crop release

<div>
       
       <p>The header index adjusts the reel speeds in relationship to the windrower ground speed; the operator can focus on the platform position instead of adjusting the reel speed as the windrower speed changes due to field conditions. The index feature maintains a preselected speed based on the ground speed plus an easily adjusted index number. This ensures that when the operator sets the index, the reel will turn fast enough to ensure proper crop flow.</p>
      </div>

Header index ensures optimum platform speeds

<div>
       
       <p>The 508-mm (20-in.) center-feed augers are positioned over replaceable, high-density polyethylene auger pans. Rubber feed fingers and a direct-mounted hydraulic motor ensure optimum performance.</p>
       <p> </p>
       <p>Crop feeding is enhanced by the 100A Platform’s poly feed pan design, progressive feed paddles, and unique stripper bars, which combine to allow for smooth feeding even in adverse conditions. The poly auger pan reduces mud buildup, improves crop flow, and is easier to clean. The poly is longer lasting than other transition pan materials, as well as less susceptible to rock damage. The feed pan is made of two separate bolted-in sheets of poly. This sectional design allows for easier replacement than steel feed pans.</p>
       
       <p>The center-mounted rubber fingers keep crop moving consistently into the conditioner.</p>
       <p> </p>
       <p><em>NOTE: The 160A Grass Seed Windrower Platform does not have a conditioner.</em></p>
      </div>

Center-feed auger with poly auger pans for improved crop flow

<div>
       
       <p>Located below the auger and in front of the conditioner rolls, the rock-drop opening allows rocks and other obstructions to drop out before reaching the conditioning rolls while still ensuring proper crop flow. The rock-drop feature helps to protect the platform's internal components from damage, which will increase uptime and productivity. It also allows sand, soil, and debris to drop out below the windrow for higher-quality crop and less foreign material in the windrow.</p>
      </div>

Rock-drop opening protects conditioner rolls

<div>
       
       <p>The A-Series conditioner rolls are a full 2591-mm (102-in.) wide for crimping performance and ensure thorough conditioning of the plant stem. The use of the steel-on-steel intermeshing roll design ensures that leaves are retained for high protein value, providing high-quality hay, forage, and alfalfa crops. The straight design of these conditioner rolls makes them easy to repair, as damaged sections can easily be cut out and replaced.</p>
       <p> </p>
       <p>The rolls are powered by a hydraulic motor with an adjustable speed from 601 rpm to 790 rpm. The steel rolls offer improved wear life, particularly in adverse soil and crop conditions.</p>
      </div>

Durable steel conditioner rolls for long life

<div>
       
       <p>Right-hand and left-hand windrow-forming shields are easily adjusted from the rear of the unit.<br>  <br> Independent adjustment of the forming shields gives the operator more control over the windrow formation. This is a simple, no-tool adjustment.<br>  <br> The windrow width is adjustable from a narrow, 0.9-m (3-ft) swath to a wide, fast-drying, 2.3-m (7.67-ft) swath, depending on crop conditions.<br><br>The rear fluff shield enables further control over the shape of the windrow.</p>
      </div>

Adjust windrow width to meet drying requirements

<div>
       
       <p>Platform reverser controls are available for the W155 Self-Propelled Windrower only:</p>
       <ul>
        <li>Easily activated from operator's station to clear platform of plugs</li>
        <li>Reverser slowly reverses the knife drive and optional hay conditioner, if equipped, to clear plugs</li>
        <li>Highly recommended when using optional hay conditioner with 400D Platforms</li>
        <li>Operators can run machines closer to their maximum capacity and it will take less time to unplug</li>
       </ul>
       
       <p>The reverser consists of a valve block and valves, shown in the image above. It is the gold-colored valve block on the right side. It is shown plumbed for a 100A Auger Platform.</p>
      </div>