<p>Super 20 LS</p>
<div>
<p>Super 20 LS With new &lsquo;Lift &amp; Shift&rsquo; technology</p>
</div>
<ul>
<li>Super long 20&#8242; Basket for easier filling, less spillage and more capacity!</li>
<li>New &lsquo;Lift &amp; Shift&rsquo; Technology lifts the basket higher to dump into the tallest of builders while shifting to dump cotton into the center of the builder!</li>
<li>Solid straight side for trouble-free operation of chain unload!</li>
<li>Low 14&#8242; 2&#8243; transport height!</li>
</ul>


Boll Buggy Super 20

Cotton Equipment

<h2>Standard Features</h2>
<ul>
<li>24&#8243; dia., 6 blade spin balanced fan.</li>
<li>1 1/2&#8243; shaft, with heavy service bearings.</li>
<li>Heavy-duty love joy connection.</li>
<li>Permco (Case Drain) hyd. motor.</li>
<li>25&#8242; 5&#8243; suction hose, 8&#8243; dia.</li>
<li>Hyd. hoses with connecting tips.</li>
<li>Hoses are long enough to mount fan to rear of Buggy.</li>
</ul>


Boll Vac

<div>
<h2>The Concept:</h2>
<ul>
<li>Eliminates the Module Builder and Module Builder power unit.</li>
<li>Uses tractor farmer already owns to pull the Modulating Boll Buggy.</li>
<li>Utilizes far less expensive basket-style strippers.</li>
<li>No module builder ground crew necessary.</li>
<li>Converts Boll Buggy operator to Modulating Boll Buggy Operator.</li>
<li>No Round Bale Staging Tractor required.</li>
<li>Eliminates non-recoverable Round Bale Wrap cost.</li>
</ul>
<h2>Tamp on the go!</h2>
<p><strong>Easy Unload</strong>&mdash;When the electric solenoid valves are switched to the unload function, the rear gate is opened, the floor is dropped to ground level, and the floor unload chains are turned on.</p>
<p>There is no need to time the unloading chains with the forward motion of the tractor. Once the operator finds the best forward gear in the tractor that corresponds to the speed of the unloading chains, modules can be consistently conveyed off without fear of breaking a module.</p>
<p>A finished module is a full 16 feet long&mdash;exactly one-half that of a typical module. Half tarps can be pulled over the module by using the rear gate of the Modulating Boll Buggy.</p>
<p>Modules built by the Modulating Boll Buggy have the same density of compaction as modules built with a typical module builder. The modules are solid and well-built, easily withstanding loading and unloading by a module moving truck.</p>
</div>
<div>
<h2>Features</h2>
<p><strong>A dedicated hydraulic system</strong>&nbsp;using the tractor&rsquo;s 1,000 RPM PTO output shaft powers a 55 gallon-per-minute pump at 1850 tractor RPM. This system operates the four cylinders of the tamper in tamping mode, and the traversing of the bridge left to right and right to left.</p>
<p><strong>Electric solenoid valves</strong>&nbsp;control all basket operations. Hydraulic oil flows to three separate electric solenoid valves using three remotes from the tractor. With one switch of the Auto Tamp Program Module mounted in the tractor, all three valves can be changed from field operation to an unload operation.</p>
<p>In Field Operation Mode, one valve extends and collapses the receiving wall, a second valve lifts the receiving basket, and the third operates the chain unload feature. In Unload Mode, one valve opens the rear gate, the second valve drops the floor, and the third valve operates the chain floor.</p>
<p><strong>Light Weight, Bellow-Type Design</strong>&nbsp;allows for large capacity while still maintaining light weight. The receiving wall extends out easily to take one or two full loads from a 7460 stripper even with wide stripper head configurations. Dumping can be readily accomplished with zero spillage. Solid curtain fabric on the bellows blocks wind and aids in dumping during high wind situations.</p>
<p><strong>Four industrial-style tie bolt cylinders</strong>&nbsp;compact the cotton to the same density as that of a typical module builder. The ability to both convey cotton into the compaction chamber and the ability to continuously pack cotton while moving through the field converts wasted travel time to valuable work time!</p>
<p><strong>The bridge is turned lengthways</strong>rather than sideways like on a normal module builder in order to allow it to tamp the full length of the module, which compacts twice as much cotton with each stroke compared to a typical builder. In addition, the scissor-action of the tamper cylinder allows for a full stroke of the tamper without having cylinders extending high above the compaction chamber.</p>
</div>
<div>&nbsp;</div>
<h2>Standard Operation with a 7460 John Deere Stripper*</h2>
<table>
<tbody>
<tr>
<th>Elapsed Time</th>
<th>Basket<br />
            Dumps</th>
<th>Receiving<br />
            Chamber</th>
<th>Compaction<br />
            Chamber</th>
</tr>
<tr>
<td>5 min.</td>
<td>#1</td>
<td>Pull along stripper and take first dump (45 sec.)</td>
<td>Nothing required: follow stripper for next load.</td>
</tr>
<tr>
<td>10 min.</td>
<td>#2</td>
<td>Take next dump from stripper (45 sec. dump time).<br />
            <nr></nr>Follow stripper for next basket load.</td>
<td>Raise basket and place Auto Tamp (AT) on loading function. Two basket loads are dumped with one raising of the receiving basket.</p>
<p>            Place AT to desired tamping program.</p>
<p>            Lower basket after all cotton is in compaction chamber. Continue to run AT in tamping program while following stripper for third basket load.</td>
</tr>
<tr>
<td>15 min.</td>
<td>#3</td>
<td>Take third dump from stripper (45 sec. dump time).</p>
<p>            Follow stripper for next basket load.</td>
<td>Begin dumping cotton and then switch AT to loading function while dumping the remainder of the third dump.</p>
<p>            Switch AT back to tamping program while following stripper for fourth basket load.</td>
</tr>
<tr>
<td>20 min.</td>
<td>#4</td>
<td>Take full dump from stripper and carry in basket while following the stripper for next basket load.</td>
<td>Continue to compact the third (topped off) basket load completing the module.</td>
</tr>
<tr>
<td>25 min.</td>
<td>#5</td>
<td>Take fifth load from stripper and carry it in the basket.</p>
<p>            Immediately head for the turn row to unload the<br />
            completed module.</td>
<td>Packing can continue while moving toward the turn row until the module is tightly packed.</td>
</tr>
<tr>
<td colspan="4">At the turn row (or module yard), position the Modulating Boll Buggy to unload. Change the switch on the controller from field operation to unload operation, open the gate, drop the floor to ground height, start the floor unload chains while slowly pulling forward. This will unload the finished module.</p>
<p>            Return back to the field while raising the receiving basket while dumps #4 and #5 are still being carried in the basket. Unload both dumps into the compaction chamber by placing AT in loading function and then switch AT to the desired tamping program.</td>
</tr>
<tr>
<td>30 min.</td>
<td>#6</td>
<td>Take sixth dump from the stripper. This is the topping-off dump for the next module. Follow stripper for next basket load.</td>
<td>Begin dumping cotton and then switch AT to loading function while dumping the remainder of the third dump.</p>
<p>            Change AT to tamping program while following the stripper for the seventh basket load.</td>
</tr>
<tr>
<td colspan="4">By now, one complete module of cotton has been made, and enough cotton has been received to build two complete modules. Continue the cycles as listed above to continue building a cotton module every fifteen minutes!</td>
</tr>
</tbody>
</table>
<p>*John Deere is a registered trademark of Deere &amp; Company. The John Deere 7460 generally requires its basket to be dumped about every 5 minutes, assuming standard stripper conditions. Different field conditions, variation in the harvested cotton, and/or different operating procedures may yield different results than that illustrated above.</p>
<h2>Specifications</h2>
<table>
<tbody>
<tr>
<td>Height</td>
<td>16&rsquo;5&rdquo;</td>
</tr>
<tr>
<td>Width</td>
<td>17&rsquo;10&#8243;</td>
</tr>
<tr>
<td>Weight</td>
<td>30,000 lbs.</td>
</tr>
<tr>
<td>Basket Capacity</td>
<td>1875 cu ft.</td>
</tr>
<tr>
<td>Basket Width at top</td>
<td>16&rsquo;0&#8243;</td>
</tr>
<tr>
<td>Basket Length</td>
<td>17&rsquo;4&#8243;</td>
</tr>
<tr>
<td>Module Size</td>
<td>7&rsquo;4&#8243; wide x approx. 9&rsquo;6&#8243; high x 16&rsquo;0&#8243; long</td>
</tr>
<tr>
<td>Ground Clearance</td>
<td>20&#8243;</td>
</tr>
</tbody>
</table>
<p></p>


New Modulating Boll Buggy

<div>
<h1>33&#8243; Big Lip Fold-Out Door</h1>
<h2>Moves Cotton to Center of the Builder &amp; Eases Parking beside Builder</h2>
<div>&nbsp;</div>
<div>&nbsp;</div>
<ul>
<li>The Boll Buggy&rsquo;s unique Big Lip design makes pulling alongside a Module Builder a snap, saving valuable field time.</li>
<li>The door automatically opens when lifting the basket, gaining an additional 33&#8243; of dump out wall and 49&#8243; from the basket pivot point. Cotton is easily dumped in center of Builder eliminating most cotton spills.</li>
<li>Top of modules made with a Big Lip Boll Buggy are even and level, gaining more cotton per module. Module haulers love to haul Boll Buggy modules and the Gin likes to gin them.</li>
<li>Big Lip folds down into basket making a safe and easy transport height of 14&#8242; 8&#8243;.</li>
<li></li>
</ul>
</div>


Boll Buggys

<h2>Effortless Dependable Operation</h2>
<p>A center-mounted hydraulic cylinder on rear door is a definite plus for effortless operation. The simple but &#8220;sure-lock&#8221; design offers years of dependable service. Expanded metal on the front and rear allows the operator to see behind the tractor during transport for safer operation. The expanded metal also prevents &ldquo;blow back&rdquo; while dumping.</p>
<p>Producers typically own a module builder for ten years or more. You expect and deserve convenience and resale value for your money. No other module builder provides you with this strength or features 10 gauge construction.</p>
<p>A 96&#8243; stroke tamper cylinder provides compaction of the cotton from the start to enhance the quality of the module. The arched foot piece assists in rounding the top to conform to the desired shape, resulting in modules which tarp well and shed water.&nbsp;<strong>ALL WELDED CONSTRUCTION CARRIES A THREE YEAR WARRANTY!</strong></p>
<h2>Customers Choice, Dual Wheels or Singles</h2>
<p>Our dual eight hole wheels with 5,000 lb. rated spindles are combined with a walking beam providing smooth transport in the field or on the road. Safe and reliable. Also, the side construction is braced in a fashion that prevents bowing of the box.</p>
<p>Single truck tire combines adequate load carrying capability with high speed transportation. Single 8,000 hub and spindle with high capacity truck tires.</p>
<p>The CRUSTBUSTER/SPEED KING Module Builder is the only builder on the market using heavy 10 gauge sheet metal construction. See how this compares to the competition&#8217;s 12 or 14 gauge construction. Strength and durability are just part of reason that CrustBuster/Speed King beats the competition.</p>
<h2>HYDRAULICS</h2>
<ul>
<li>1000 RPM direct mounted PTO pump.</li>
<li>Rated minimum 21 GPM to maximum 39 GPM. Eliminates driveline.</li>
<li>30000 PSI rated 3-spool directional valve.</li>
<li>System operating pressure set at 2000</li>
<li>Large capacity hydraulic reservoir with suction and return filters. Total system capacity (75 gallons).</li>
<li>Hydraulic hoses rated at 3000 PSI operating pressure with SAE JIC flared hose ends.</li>
<li>Hydraulic tubing rather than black pipe. No pipe threads means cleaner and fewer leaks.</li>
</ul>
<h2>The FASTEST, SMOOTHEST, MOST QUIET bridge on the market.</h2>
<ul>
<li>Uses #80 chain.</li>
<li>Uses nylatron slide material to provide smooth and quiet operation of bridge.</li>
<li>Easy take-up on chain. Incorporates short lengths of chain for easy removal after take-up is used. No chain cutting required.</li>
<li>Uses 5&#8243; urethane guide roller with sealed bearing providing long wear and requires no lubrication.</li>
<li>Uses two 32 cubic inch hydraulic motors mounted directly to 10&#8243; drive wheels. Motor male output shaft splined mated to splined female input shaft.</li>
<li>10&#8243; drive wheel uses 1&#8243; of urethane bonded to hub. This combination provides long wearing material which gives excellent traction for bridge.</li>
<li>Both sides of 10&#8243; drive/bridge carrier wheel supported by 2&#8243; bearings.</li>
<li>Inside guide uses nylatron slides to give quick, smooth response.</li>
<li>Outside guide rollers provide straight driving of bridge. No bridge racking or walking when traveling down builder.</li>
<li>Posi-track hydraulic design.</li>
</ul>
<h2>TAMPER</h2>
<ul>
<li>Caged tamper cylinder guide.</li>
<li>Uses heavy-duty 6 x 6 upright guide tubing.</li>
<li>96&#8243; Stroke tamping cylinder.</li>
<li>Arched footpiece for rounded top on module.</li>
<li>Cylinder lock is visible user friendly and no hydraulics.</li>
<li>Heavy-duty pads provided on top and bottom strokes of tamping cylinder.</li>
</ul>


Module Builders

CrustBuster

<h1>Total Plant Systems</h1>
<div>&nbsp;</div>
<div>
<p>Exclusive and Versatile Wobble-Slot Design is the best single seed placement volumetric meter on the market for a wide variety of seeds.</p>
<p>Easily adjustable Parallel Linkage engineered with 10&#8243; of travel to create constant down-pressure throughout its operating range</p>
</div>


Total Plant Systems

<h2>Bedded Seed Beds or &ldquo;Planting on the Flat&rdquo;</h2>
<ul>
<li>Three different opener height adjustments for various bed depths</li>
<li>6&#8243; stagger for maximum trash flow</li>
<li>Precise seed placement</li>
<li>Superior depth gauge capability</li>
<li>15&#8243; Planter size double disc blades offset 1/2&#8243; for maximum trash cutting capability</li>
<li>Durable ductile cast hubs with triple sealed bearings</li>
<li>Heavy-duty adjustable down pressure springs</li>
<li>Optional dual gauge wheels available</li>
<li></li>
</ul>


5527/5530/5536 3-Point Grain Drills

<h2>Twin-screws help break up lumpy material and will handle up to 80 tons* per hour.</h2>
<p>Standard 5&#8242; (requires 7&frac12; hp) and 9&#8242; (requires 10 hp) incline lengths, both with automotive-size wheels.</p>
<p>*Metric tons (2200 lbs.) based on 56 lb. material</p>


Twin-Screw Undercar Conveyors

<h2>Twin Row 3-Point Vacuum Precision</h2>
<h1>Peanut Planter</h1>
<ul>
<li>Big 2&frac12; bu./ft. box carries up to four times as much seed as a single row planter; or double the amount of seed in a competitor&rsquo;s twin row planter.</li>
<li>Cast steel planter opener with dual gauge wheels and Narrow Curf design.</li>
<li>State-of-the-art vacuum planter is industry standard compatible/supportable.</li>
<li>Say goodbye to chains! CrustBuster&rsquo;s new Flex Drive increases run time and decreases maintenance downtime.</li>
<li>Hydraulic or mechanical drive.</li>
</ul>


Twin Row Peanut Planter

<h2>The All Plant No-Till Conservation Drill will plant conservation grasses in waterways,<br />
reseed pastures, drill cover crop seeds, or production crops.</h2>
<ul>
<li>Grass Seeds</li>
<li>Cover Crop Seed Mixtures</li>
<li>Plant Production Crops</li>
</ul>
<div>
<div>
<h1>Fluffy Grass Seed Box</h1>
<p><strong>Agitators</strong>&nbsp;rotate to push fluffy grass seed into the&nbsp;<strong>picker wheel</strong>&nbsp;below that grabs the seed and carries it to the delivery tube.</p>
</div>
<div>
<h1>Grain Box</h1>
<p>All seed and combinations of different seed mixtures such as cover crops can be precisely controlled with the&nbsp;<strong>wobble slot</strong>. Adjustable for varying size, weight and rate.</p>
</div>
</div>
<div>&nbsp;</div>
<div>
<h1>Legume Grass Seed Box<br />
Features small Grass Seed metering.</h1>
<p>Precision Fluted Feed rolls, in the Brillion&trade; seed meter cup, meter out precise amounts of seed. Their accuracy allows you to seed the smallest seeds at the exact rates you want&hellip;as low as one half pound per acre.</p>
</div>
<p>The CrustBuster / Speed King All Plant No-Till Conservation Drill plants up to three different conservation grass seeds together in one pass. Three different seed boxes plant three different variety seeds together. It&#8217;s seed boxes are designed and proportioned for different seed volumes and rates. The drill also has the ability to plant from only one seed box without operating the other two. The largest seed box at the front can be used as a primary grain reservoir for seeding crops. Or it can be used together with the other two seed boxes containing legume seed and / or fluffy grass seed for conservation work.</p>
<p>This drill is equipped with CrustBuster&rsquo;s proven Parallel Linkage Opener, engineered to create constant down pressure throughout its operating range. Consistent planting depth control is achieved with parallel linkage and easily adjustable constant down pressure. It is designed so the openers remain parallel to the ground at uniform depth throughout the opener&#8217;s travel creating a constant relationship between the blade and press wheel to achieve consistent depth control. Offset blades penetrate firm soil and create the ultimate seed furrow. The leading notched blade with a 3/4&#8243; offset gives maximum penetration and trash flow. Five quick-change down pressure adjustments from 100 lbs. to 500 lbs per opener aids in attaining consistent planting depth. The no-till conservation drill is available in 10&#8242;, 13&#8242;, 15&#8242;, 20&#8242;, 25&#8242; and 30&#8242; width.</p>


No-Till Conservation Drill

<table cellpadding="0">
<tbody>
<tr>
<th colspan="2">Field Loader Specifications</th>
</tr>
<tr>
<td>Overall length</td>
<td>37&#8242; 7&#8243;</td>
</tr>
<tr>
<td>Overall width</td>
<td>8&#8242;</td>
</tr>
<tr>
<td>Transport height</td>
<td>12&#8242;</td>
</tr>
<tr>
<td>Discharge height standard</td>
<td>12&#8242; 9&#8243;</td>
</tr>
<tr>
<td>Discharge height optional</td>
<td>13&#8242; 6&#8243;</td>
</tr>
<tr>
<td>Belt width</td>
<td>24&#8243;</td>
</tr>
<tr>
<td colspan="2">Fertilizer up to 180 tons per hour</td>
</tr>
<tr>
<td>Hopper width</td>
<td>3&#8242; 3&#8243;</td>
</tr>
<tr>
<td>Hopper height</td>
<td>6&#8243;</td>
</tr>
<tr>
<td>Hopper length</td>
<td>7&#8242;</td>
</tr>
<tr>
<td colspan="2">Honda&reg; 13 hp electric start motor</td>
</tr>
<tr>
<td colspan="2">Centrifugal clutch</td>
</tr>
<tr>
<td>Max. belt speed</td>
<td>900fpm</td>
</tr>
<tr>
<td>Min. belt speed</td>
<td>550fpm</td>
</tr>
</tbody>
</table>
<p></p>


Field Loader

<p>Meeting the challenge of successfully planting Canola crops in a variety of soil conditions with a wide range of dry, moderate to good soil moisture and in fields ranging from tilled to no-till is what the new CrustBuster Canola Special Drill does best.</p>
<p>&nbsp;</p>
<h2>Available in</h2>
<ul>
<li>30&#8242;, 40&#8242; &amp; 45&#8242; widths</li>
<li>7.5&#8243; &amp; 10&#8243; spacing</li>
</ul>
<h2>Floating Trash Whippers available on every other row.</h2>
<ul>
<li>10&#8243; spaced drills Single or Double Trash Whippers available on 20&#8243; centers.</li>
<li>7.5&#8243; Spaced drills Single Floating Trash Whippers available on 15&#8243; centers</li>
</ul>
<div>
<h2>Proven All Plant Parallel Linkage Opener.</h2>
<p>The Canola Special Drills have the proven Parallel Linkage Opener for precise depth control and the adjustable all seed Wobble Slot metering system.</p>
</div>
<div>
<h2>Wobble Slot Metering System</h2>
<p>CrustBuster&rsquo;s Wobble Slot is a ductile cast seed cup that is bored and machine faced with a sintered metal rotor of bronze alloy construction (no plastic). Its the most gentle and precise metering system and will not crack or split seed. It has the proven ability to do a wide variety of seeds including canola and also cover crops as well as traditional production crops such as wheat and soybeans.</p>
</div>


Canola Special No-Till Drill

<p>All Plant No-Till Drills from CrustBuster / Speed King Inc. have the ability to drill many different varieties and sizes of seed into all types of planting conditions ranging from heavy residue no-tillage, minimum tillage and conventional tillage fields. Model sizes range from single section ten feet width up to three section fifty feet width. All of these drills can be folded down to narrow road width for transport from field to field.</p>
<h2>Equipped with Wobble Slot for seed placement</h2>
<p>The ability to drill such a wide variety of seed comes from CrustBuster&#8217;s exclusive Wobble Slot which is a unique all metal ductile cast seed cup metering system that achieves single seed placement. The Wobble Slot is bored and machine faced with a sintered metal rotor of bronze alloy construction (no plastic parts).</p>
<p>A precision processed rotor is adjusted by moving the shaft at one point on each drill box, with infinite spacing from 0 to 3/4&#8243; for varying seed sizes, weights and rates. No feed gates to adjust, no special tools required. The smooth spiral action admits seeds into the chute for uniform planting. No rough cogs to damage fragile seeds. The end result is precise single seed placement. The Wobble Slot allows controlled seeding of crops such as wheat, soybeans, sorghum, alfalfa as well as a full variety of cover crop seed mixtures.</p>
<h2>Parallel Linkage Opener</h2>
<p>The All Plant Drill&rsquo;s Parallel Linkage Opener is engineered to create constant down pressure throughout its operating range. Consistent planting depth control is obtained with parallel linkage, along with easily, adjustable constant down pressure. It is designed so the body remains parallel to the ground throughout the opener&rsquo;s travel to create a non-changing relationship between the blade and press wheel which is how the consistent depth control is achieved. Offset blades penetrate firm no-till soil and create the ultimate seed furrow. The leading notched blade with 3/4&#8243; offset gives maximum penetration and trash flow. Five quick change down pressure adjustments from 125 lbs to 500 lbs per opener.</p>


All Plant No-Till Drills

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader