<ul>
<li>Make long days easier with equipment and technology that works together for you.</li>
<li>Increase productivity by being able to cover more ground.</li>
<li>Reduce overlap and maximize inputs.</li>
<li>Reduce fatigue and improve operator experience&nbsp;</li>
</ul>


AutoTrac™ Activation AutoTrac™ Activation

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Guidance

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Use a Dealer-owned RTK network to reduce your administrative expenses</li>
<li>Provides less chance of radio interference, and RTK Extend to minimize shading signal loss</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation</li>
<li>Requires RTK subscription provided by your John Deere dealer or your own base station</li>
</ul>


Radio RTK 900

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>
<div></div>


Active Implement Guidance

<ul>
<li>An affordable and portable way to put precision ag to work for you</li>
<li>8.4-inch touchscreen provides easy-to-use experience</li>
<li>High-contrast screen allows you to see your display in bright sunlight, even on open station tractors</li>
<li>Basic documentation and AutoTrac come standard</li>
</ul>


4240 Universal Display

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Allows you to use RTK precision in difficult areas such as hilly terrain because there is no line-of-sight requirement to the base station.</li>
<li>No need to manually switch base stations as you move between fields — you can roam anywhere within the network and have access to the RTK correction signal.</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, RTK Ready Activation</li>
<li>Requires John Deere Mobile RTK subscription</li>
</ul>


RTK Mobile Correction Signal

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>


AutoTrac™ Implement Guidance

<ul>
<li>Faster pull-in time and improved performance in shaded conditions</li>
<li>Provides +/- 6 inch pass-to-pass accuracy</li>
<li>Options to upgrade for enhanced accuracy and longer term repeatability</li>
<li>Rapid Recovery feature can quickly re-acquire lost signals</li>
</ul>


StarFire™ 6000 with SF1 Receiver

<ul>
<li>Paddle sensor mounted on front wheel</li>
<li>For late, post-emerge applications</li>
<li>Approved for 30-in to 40 in (76 cm-101.6 cm) corn</li>
<li>For all 4 Series Sprayers</li>
</ul>


AutoTrac™ RowSense™ - Sprayer AutoTrac™ RowSense™ - Sprayer

AutoTrac™ RowSense™ – Sprayer AutoTrac™ RowSense™ – Sprayer

<p>Realize the benefits of AutoTrac on Non-Deere machines.</p>
<ul>
<li>Make long days easier with equipment and technology that works together for you.</li>
<li>Increase productivity by being able to cover more ground.</li>
<li>Reduce overlap and maximize inputs.</li>
<li>Reduce fatigue and improve operator experience</li>
</ul>


AutoTrac™ Controller

<ul>
<li>RTK-like accuracy &#8211; 2.5 cm pass to pass repeatability</li>
<li>SF-RTK achieves 75% faster pull-in times, compared to SF3 signal</li>
<li>Guaranteed 5-year repeatability, season to season</li>
<li>Drop-in replacement for StarFire™ 6000 receiver</li>
</ul>


StarFire™ 7000 Receiver with SF-RTK Signal

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Precision Ag Technology

<div>
<ul>
<li>View on-the-go harvest information for potatoes, onions, sugar beets, and other specialty crops.</li>
<li>Transfer your data into John Deere Operations Center to make better decisions.</li>
</ul>
</div>


Yield Documentation Specialty Crops

<div>
<ul>
<li>Automate scraper adjustments to form land based upon water management software recommendations</li>
<li>Take advantage of plane control, grade control, and cross-slope compensation to achieve desired land forming results</li>
<li>Utilize horizontal RTK level accuracy without the need for additional laser guidance corrections</li>
</ul>
</div>


iGrade™

<div>
<ul>
<li>On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar</li>
<li>Automatically adjust inoculant dosage based on current dry matter level</li>
<li>Automatically adjust length-of-cut, on the go</li>
<li>The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.</li>
<li>Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.</li>
</ul>
</div>


John Deere HarvestLab™ 3000 HarvestLab™ and Constituent Sensing

<div>
<ul>
<li>Improve asset utilization by electronically assigning work orders to application equipment.</li>
<li>Make better scheduling decisions by seeing the entire equipment fleet on a single map.</li>
<li>Use advanced reporting to analyze machine and operator performance.</li>
</ul>
</div>


AgLogic™

<div>
<ul>
<li>Reduce the cost of having to purchase multiple rate controllers by controlling both liquid and dry products simultaneously with a single controller.</li>
<li>Provides a common rate controller and user interface across multiple machine and implement types including multi-tank air carts, direct injection systems, and dual-boom and tiered-boom systems.</li>
</ul>
</div>
<div></div>


John Deere Rate Controller 2000

Technology Products

<div>
       
       <p>As equipment gets larger and margins tighter, accuracy of in-field operations and input placement is more critical than ever.<br><br>When making a pass in a field, traveling from one end of the field to another, the position accuracy of the return pass is critical. Pass-to-pass accuracy means the planter guess rows will be accurate and subsequent passes are less likely to result in crop damage.<br><br>Repeatability defines how accurately the receiver calculates its position over a relatively long time window.</p>
      </div>

Selecting the right correction signal

<div>
       
       <p>Farming requires multiple passes. This requires a method of guidance with a high degree of repeatability in order to minimize overlap (extra cost of seed, fertilizer, chemical and machine hours) and skips (loss of production).</p>
       <p> </p>
       <p>Maintaining repeatable accuracy is important in all operations, especially with cropping practices that require multiple passes through the field. AutoTrac creates more consistent row spacing, reducing the potential for crop damage with subsequent passes through the field.</p>
       <p> </p>
       <p>University studies have shown that operators tend to overlap 5 to 13 percent over the course of an entire day, which could mean up to 60 cm (23 in.) of overlap with a 6 m (19 ft) tillage implement. This means that a producer with 300 ha (740 acres) actually works and pays for 330 ha (815 acres).</p>
       <p> </p>
       <p>With reducing overlap by using AutoTrac more ground is covered in the same time and inputs like chemicals, fertilizer, fuel, labor and machine hours are reduced.</p>
       
       <table border="1" width="100%" cellspacing="2" cellpadding="2" bgcolor="#ffffff">
        <tbody>
         <tr>
          <td colspan="2"><p align="center"><strong>Reduced overlap with AutoTrac</strong></p></td>
         </tr>
         <tr>
          <td><p align="center">Field 1</p></td>
          <td><p align="center">4.72 percent</p></td>
         </tr>
         <tr>
          <td><p align="center">Field 2</p></td>
          <td><p align="center">8.03 percent</p></td>
         </tr>
         <tr>
          <td><p align="center">Field 3</p></td>
          <td><p align="center">12.74 percent</p></td>
         </tr>
         <tr>
          <td><p align="center">Average:</p></td>
          <td><p align="center">8.50 percent</p></td>
         </tr>
         <tr>
          <td colspan="2"><p align="center">GPS accuracy versus manual accuracy</p></td>
         </tr>
        </tbody>
       </table>
      </div>

GreenStar™ 3 2630 Display: Increase profitability and reduce overlap

<div>
       
       <p>AutoTrac™ assisted steering system greatly increases operator productivity by maintaining consistent accuracy and efficiency. Operators remain more alert while they are in the field and are able to focus on implement settings and varying field conditions. AutoTrac also allows operators to confidently create evenly spaced rows past sunset, as well as in rain, dust, or fog.</p>
       
       <p>AutoTrac also improves operator comfort as the operator has time to concentrate on implement tasks.</p>
      </div>

Reduce operator fatigue and time spent in each field

<div>
       
       <p>As tractors and field equipment become larger and heavier, there is a growing concern about soil compaction. Heavy equipment and tillage implements can cause damage to the soil structure. Soil structure is important because it determines the ability of a soil to hold and conduct water, nutrients, and air necessary for plant root activity.</p>
       <p> </p>
       <p>By using AutoTrac, operators can optimize the number of passes and reduce compaction. Additionally, the operator can confine traffic between certain rows and avoid compacting the row area.</p>
       <p> </p>
       <p>AutoTrac allows producers to use the same traffic lanes year after year, sacrificing a small portion of the field in favor of having no wheel traffic in the majority of the field. Restricting traffic to specific lanes also provides a firm soil surface for more efficient tractor operation.</p>
       <p> </p>
       <p>Without using AutoTrac during field operations, there is tendency for passes to overlap. Each pass over a field under poor conditions can cause significant damage to the soil.</p>
      </div>

Reduce soil compaction and passes

<div>
       
       <p>AutoTrac™ guidance steering system allows operators to use tramline management more effectively, minimizing soil compaction. Additionally, AutoTrac allows the machine operator to select from a variety of guidance modes including straight track, AB curves, adaptive curves, circle track, boundary fill, machine access, and swap track. These tracking options allow the operator to select the track best suited for the field and conditions reducing the number of passes needed to cover the field.</p>
       <h5>Curve track</h5>
       
       <p>The curve track mode helps operators by automatically steering curved guidance lines on terrain that does not allow for straight track to be used (rolling hills or contours).<br>  <br> When running with curve track, keep in mind these basic principles:</p>
       <ul>
        <li>Straight track is more accurate than curve track.</li>
        <li>A machine with an integrated AutoTrac steering kit is more accurate than a machine with the AutoTrac Universal steering kit.</li>
        <li>Slower speeds are more accurate than faster speeds.</li>
        <li>Gentle curves are more accurate than tight turn radius curves.</li>
       </ul>
       <h5>Types of curves</h5>
       
       <table border="1" cellspacing="2" cellpadding="2">
        <tbody>
         <tr>
          <td><strong>Simple curve</strong></td>
          <td><p align="center"></p></td>
          <td><strong>S-curve</strong></td>
          <td><p align="center"></p></td>
         </tr>
         <tr>
          <td><strong>Boxed</strong></td>
          <td><p align="center"></p></td>
          <td><strong>Racetrack</strong></td>
          <td><p align="center"></p></td>
         </tr>
         <tr>
          <td><strong>Spiral</strong></td>
          <td><p align="center"></p></td>
          <td><strong>Circle</strong></td>
          <td><p align="center"></p></td>
         </tr>
        </tbody>
       </table>
       <p> </p>
       <p>Two different modes can be used depending on the type of curves that need to be created: adaptive curves or A/B curves.</p>
       <p> </p>
       <p><strong>Adaptive curve track</strong></p>
       <p> </p>
       <p>This track allows the operator to record a manually driven curved guidance line. Operators using a GreenStar™ 3 2630 Display have the ability to record and utilize multiple adaptive curves per field. This feature is especially useful as operators maneuver around terraces or irregular, constantly changing fields. Adaptive curve mode also has the ability to connect line segments when documentation is selected as the recording source. Self-propelled forage harvester or combine operators may find this functionality useful if they need to quickly raise their header for any reason.</p>
       
       <p><strong>A/B curve track</strong> </p>
       <p> </p>
       <p>This track allows the operator to set a curved line in a field with two end points (A and B) and will generate guidance lines parallel to the initial track in either direction.</p>
       
       <p>The line stays the same across the field, and an operator can use skip track.</p>
       
       <p>Even if an operator drives around an obstacle in the field, the next pass follows the original track line.</p>
       <h5>Straight track </h5>
       
       <p>The straight track mode helps operators by automatically driving straight. Operators can create an initial straight line using a variety of different setup options.</p>
       <p> </p>
       <p>Once the track has been defined, all subsequent track lines in the field are created parallel to each other at the defined track spacing distance.</p>
       <h5>Manual circles with Parallel Tracking guidance systemt</h5>
       
       <p>The circle track mode helps operators drive concentric circles in a field when a circle is set up and guidance is being used. Operators can create an initial circle using a variety of different methods. Once the initial circle has been defined, all the subsequent circles in the field are created.</p>
       <p> </p>
       <p>Circle track is available in Parallel Tracking mode. Pivot Pro activation must be purchased to use circle track with automatic guidance.</p>
       <h5>Concentric circles with Pivot Pro</h5>
       
       <p>The Pivot Pro module allows the operator to automatically guide a machine in defined concentric circles in fields with center-pivot irrigation systems.</p>
       <p> </p>
       <p>Circle track functionality is included with GreenStar Basics, allowing the operator to manually guide the machine around the concentric circle without an upgrade activation. Pair Pivot Pro activation with GreenStar AutoTrac to have the machine drive circles automatically.</p>
       <p> </p>
       <p>Pivot Pro is approved for level fields, as accuracy can be degraded as slope increases. If there is slope in the field, there is the potential the circle track space and the center-pivot tower track will not match up. Keep in mind, AutoTrac draws the circle spacing as if the plane were level.</p>
       <h5>Follow track mode reduces compaction</h5>
       
       <p>Unique to John Deere Active Implement Guidance, the follow track mode assists the driver when operating headlands or navigating around obstacles, allowing the implement to follow the tractor guidance path. This helps reduce crop damage and soil compaction.</p>
       <h5>Tramline management </h5>
       
       <p>Tramline management provides the opportunity to setup and edit certain guidance lines as tramlines. Those lines will be highlighted in a separate color in the guidance screen. Tramline management is available on the GreenStar 3 2630 Display in straight track, AB curve, and circle track modes.<br><br> Tramlines can be set and stored for each A-B line in the display. This allows the operator to properly seed and plant fields with accurate tramlines defined. This will make it easier to reduce inputs on all following field operations such as spraying.<br><br><em>NOTE: Tramline management is not currently available on the GreenStar 3 CommandCenter™ controls.</em></p>
       <p><strong>Swap track</strong><br>  <br> Swap track provides operators the ability to quickly switch guidance modes as they work through fields varying geographic conditions. Operators can easily move from straight track to any of the other tracking modes as needed. Swap track allows the operator to toggle between up to four different guidance lines within the same field on the GreenStar 3 2630 Display. Operators can also change the track order while AutoTrac is engaged.<br>  <br> Swap track is available on the GreenStar 3 2630 Display.<br>  <br><em>NOTE: Swap track is not available on the GreenStar 3 CommandCenter.</em></p>
      </div>

Use many tracking options for any field

<div>
       
       <p>When paired with a StarFire™ Receiver and GreenStar™ Display, the machine steering kit completes the components that automatically steer the machine. Regardless of the steering kit, the receiver and display help standardize the operating experience between various machines in the operation. This reduces the learning curve for new operators and makes it easier for the operator to focus on total machine optimization.</p>
       <p> </p>
       <p>Three different options are available:</p>
       <ul>
        <li>Integrated steering kit</li>
        <li>AutoTrac Universal steering kit</li>
        <li>AutoTrac Controller steering kit</li>
       </ul>
       <p><strong>AutoTrac – Integrated steering kit</strong></p>
       <p>The integrated steering kit is tied directly into the steering system on the machine and therefore provides optimum accuracy.</p>
       <ul>
        <li>Integrated – for a clean look in the machine</li>
        <li>Recent John Deere machines</li>
        <li>Team John Deere precision with John Deere machines for the highest level of performance, acquisition and accuracy</li>
       </ul>
       <p><strong>AutoTrac Universal</strong></p>
       <p>A universal system does not integrate into the existing steering system and can be moved between machines.</p>
       <ul>
        <li>Universal system can easily be moved between machines</li>
        <li>John Deere and non-John Deere machines</li>
        <li>Good acquisition and line accuracy</li>
       </ul>
       <p><strong>AutoTrac Controller</strong></p>
       <p>AutoTrac Controller is a field-installed, integrated AutoTrac system that is available on older John Deere and non-John Deere tractors.</p>
       <ul>
        <li>Integrated</li>
        <li>Older John Deere and non-John Deere tractors</li>
        <li>Enjoy an uncluttered cab</li>
        <li>Increased performance over a universal system</li>
       </ul>
       <h5>Integrated AutoTrac kits are available factory installed on the following John Deere machines:</h5>
       
       <ul>
        <li>6R Series Tractors with mechanical front-wheel drive (MFWD)</li>
        <li>7R Series Small-frame Tractors with MFWD
         <ul>
          <li>In base, no deduct option</li>
         </ul></li>
        <li>7R Series Large-frame Tractors with MFWD
         <ul>
          <li>In base, no deduct option</li>
         </ul></li>
        <li>8R Series Tractors with MFWD or tracks
         <ul>
          <li>In base, no deduct option</li>
         </ul></li>
        <li>9R Ag and Scraper Series Tractors with tracks or wheel</li>
        <li>4630 / 4730 / 4830 / 4 Series Sprayers
         <ul>
          <li>In base, no deduct option</li>
         </ul></li>
        <li>S-Series and T-Series Combine
         <ul>
          <li>In base, no deduct option</li>
         </ul></li>
        <li>7080 Series Self-Propelled Forage Harvester</li>
        <li>W200 Series Self-Propelled Windrower
         <ul>
          <li>In base, no deduct option</li>
         </ul></li>
        <li>7760 / 7660 Cotton Pickers
         <ul>
          <li>In base, no deduct option</li>
         </ul></li>
        <li>3520T Sugarcane Harvesters
         <ul>
          <li>In base, no deduct</li>
         </ul></li>
       </ul>
       <h5>Integrated kits are available for field installation on the following John Deere machines:</h5>
       
       <ul>
        <li>6420 / 6030 / 6R Premium Series Tractors with MFWD</li>
        <li>Small-frame 7020 / 7030 Premium Series Tractors with MFWD</li>
        <li>Large-frame 7020 / 7030 Series Tractors with MFWD</li>
        <li>8000 / 8010 / 8020 Series Tractors with MFWD or tracks</li>
        <li>9000 / 9020 Series Tractors with tracks or wheel</li>
        <li>9030 Wheeled Special Series Tractors (Not compatible with 9030 Track Special Series Tractors)</li>
        <li>9R / 9RT Scraper Series Tractors</li>
        <li>4700 / 4710 / 4720 / 4920 / 4730 / 4830 Series Sprayers</li>
        <li>9050 / 9060 / 9070 Series Combines</li>
        <li>7000 / 7050 / 7080 Series Self-Propelled Forage Harvesters</li>
       </ul>
      </div>