<div>
<ul>
<li>Use data from the first pass, either strip-till or planting, to automatically create full-field guidance lines for secondary passes such as planting, spraying, and harvest</li>
<li>Setup time for secondary operations is faster and crop damage is reduced as guidance is based on actual planted crop rows</li>
<li>Know which rows to start on, regardless of equipment width, even in down crops</li>
<li>Available as part of the Automation 4.0 Package</li>
</ul>
</div>


AutoPath™ AutoPath™

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Guidance

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Use a Dealer-owned RTK network to reduce your administrative expenses</li>
<li>Provides less chance of radio interference, and RTK Extend to minimize shading signal loss</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation</li>
<li>Requires RTK subscription provided by your John Deere dealer or your own base station</li>
</ul>


Radio RTK 900

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>
<div></div>


Active Implement Guidance

<ul>
<li>An affordable and portable way to put precision ag to work for you</li>
<li>8.4-inch touchscreen provides easy-to-use experience</li>
<li>High-contrast screen allows you to see your display in bright sunlight, even on open station tractors</li>
<li>Basic documentation and AutoTrac come standard</li>
</ul>


4240 Universal Display

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Allows you to use RTK precision in difficult areas such as hilly terrain because there is no line-of-sight requirement to the base station.</li>
<li>No need to manually switch base stations as you move between fields — you can roam anywhere within the network and have access to the RTK correction signal.</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, RTK Ready Activation</li>
<li>Requires John Deere Mobile RTK subscription</li>
</ul>


RTK Mobile Correction Signal

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>


AutoTrac™ Implement Guidance

<ul>
<li>Faster pull-in time and improved performance in shaded conditions</li>
<li>Provides +/- 6 inch pass-to-pass accuracy</li>
<li>Options to upgrade for enhanced accuracy and longer term repeatability</li>
<li>Rapid Recovery feature can quickly re-acquire lost signals</li>
</ul>


StarFire™ 6000 with SF1 Receiver

<ul>
<li>Paddle sensor mounted on front wheel</li>
<li>For late, post-emerge applications</li>
<li>Approved for 30-in to 40 in (76 cm-101.6 cm) corn</li>
<li>For all 4 Series Sprayers</li>
</ul>


AutoTrac™ RowSense™ - Sprayer AutoTrac™ RowSense™ - Sprayer

AutoTrac™ RowSense™ – Sprayer AutoTrac™ RowSense™ – Sprayer

<p>Realize the benefits of AutoTrac on Non-Deere machines.</p>
<ul>
<li>Make long days easier with equipment and technology that works together for you.</li>
<li>Increase productivity by being able to cover more ground.</li>
<li>Reduce overlap and maximize inputs.</li>
<li>Reduce fatigue and improve operator experience</li>
</ul>


AutoTrac™ Controller

<ul>
<li>RTK-like accuracy &#8211; 2.5 cm pass to pass repeatability</li>
<li>SF-RTK achieves 75% faster pull-in times, compared to SF3 signal</li>
<li>Guaranteed 5-year repeatability, season to season</li>
<li>Drop-in replacement for StarFire™ 6000 receiver</li>
</ul>


StarFire™ 7000 Receiver with SF-RTK Signal

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Precision Ag Technology

<div>
<ul>
<li>View on-the-go harvest information for potatoes, onions, sugar beets, and other specialty crops.</li>
<li>Transfer your data into John Deere Operations Center to make better decisions.</li>
</ul>
</div>


Yield Documentation Specialty Crops

<div>
<ul>
<li>Automate scraper adjustments to form land based upon water management software recommendations</li>
<li>Take advantage of plane control, grade control, and cross-slope compensation to achieve desired land forming results</li>
<li>Utilize horizontal RTK level accuracy without the need for additional laser guidance corrections</li>
</ul>
</div>


iGrade™

<div>
<ul>
<li>On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar</li>
<li>Automatically adjust inoculant dosage based on current dry matter level</li>
<li>Automatically adjust length-of-cut, on the go</li>
<li>The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.</li>
<li>Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.</li>
</ul>
</div>


John Deere HarvestLab™ 3000 HarvestLab™ and Constituent Sensing

<div>
<ul>
<li>Improve asset utilization by electronically assigning work orders to application equipment.</li>
<li>Make better scheduling decisions by seeing the entire equipment fleet on a single map.</li>
<li>Use advanced reporting to analyze machine and operator performance.</li>
</ul>
</div>


AgLogic™

<div>
<ul>
<li>Reduce the cost of having to purchase multiple rate controllers by controlling both liquid and dry products simultaneously with a single controller.</li>
<li>Provides a common rate controller and user interface across multiple machine and implement types including multi-tank air carts, direct injection systems, and dual-boom and tiered-boom systems.</li>
</ul>
</div>
<div></div>


John Deere Rate Controller 2000

Technology Products

<div>
       
       <p>Creating and managing guidance lines in standing crops can be difficult and time consuming. John Deere exclusive AutoPath tackles these challenges by creating guidance lines using the actual location of each crop row.</p>
       <p> </p>
       <p>AutoPath requires data that is documented during the “source operation,” which is the planting or tillage and application pass. Using this information, AutoPath can generate future guidance lines. During the source operation, the crop row locations are documented and saved in the John Deere Operations Center™ application.</p>
       <p> </p>
       <p>The source operation can be:</p>
       <ul>
        <li>A planting pass used for later tillage, application, and harvest passes</li>
        <li>A pre-planting application or row-based tillage pass used for a subsequent planting pass – for example, using AutoPath for planting after strip tillage
         <ul>
          <li>Pre-plant application or tillage passes cannot be used as a source operation for later tillage, application, or harvest passes. </li>
         </ul></li>
       </ul>
       <p>During the source operation, an implement-mounted receiver records the exact location of each crop row, as applied.</p>
       <ul>
        <li>This data builds a map of every crop row.</li>
        <li>AutoPath uses the map to create accurate guidance lines for subsequent field operations.</li>
        <li>Source operation equipment requirements and compatibility information is available <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/ams/2022/feature/autopath/source_op_requirements.html">here</a>.</li>
       </ul>
       <p>After the source operation is completed, AutoPath automatically creates these guidance lines for the entire field for later passes. These guidance lines cover:</p>
       <ul>
        <li>External boundaries</li>
        <li>Internal boundaries</li>
        <li>Headlands</li>
        <li>Crop rows</li>
       </ul>
       <p>With AutoPath, you get to work quickly and confidently using accurate guidance lines based on the crop row location.</p>
      </div>

Automatically create guidance lines from crop row data

<div>
       
       <p>Setting up guidance lines in standing crops is challenging. It takes time to properly setup and fine-tune guidance lines, especially in irregularly shaped fields. Rushing through this process can lead to crop damage or mistakes that cut into your bottom line. Because of this, many operators choose to drive the field manually or operate slower than needed.</p>
       <p> </p>
       <p>The AutoPath™ system eliminates this frustration and reduces setup time, getting you into the field quickly and more accurately.</p>
       <p> </p>
       <p>Using the location of every crop row in the field as it was planted, AutoPath quickly and accurately creates a set of guidance lines for the entire field. You get to work quickly, staying between the rows and off the crop.</p>
      </div>

Easily and accurately establish guidance in standing crops

<div>
       
       <p>Row crops are rarely simple, straight lines. Fields often have irregular boundaries. Planting around water holes, waterways, or terraces adds complexity. These challenges are easily overcome with the AutoPath™ system. No matter the complexity of your field, AutoPath quickly and automatically generates guidance lines, letting you operate efficiently. With guidance lines for the entire field, you can use AutoTrac™ automated steering along all crop rows, including field boundaries, headlands, and obstacles that were planted around.</p>
      </div>

Simple guidance for difficult fields

<div>
       
       <p>Spraying in standing crops is a challenge. Manually driving between rows is difficult and leaves the chance for accidental crop damage. Creating accurate guidance lines for standing crops isn’t always easy, and even when done properly, there is still a possibility of yield-impacting crop damage.</p>
       <p> </p>
       <p>Using the exact location of each crop row, AutoPath™ software automatically creates guidance lines that keep your machine between the rows, even around curves. Each pass follows the rows as they were planted, leading to:</p>
       <ul>
        <li>Reduced risk of crop damage</li>
        <li>Maximized overall yield</li>
       </ul>
       
       <p>For example, driving over crop during spraying reduces yield potential.</p>
       <ul>
        <li>When spraying at higher speeds, even a few short seconds of driving over crop can cause measurable yield losses.</li>
        <li>In higher yielding corn, every second of driving on the row can lead to 17.6 L (0.5 bu) or more in loss. Over the course of a day, the amount of damaged crop can add up fast, impacting your bottom line.</li>
       </ul>
       <p>AutoPath allows you to set up quickly and run confidently in standing crop. This protects yield potential and allows you to get more done each day.</p>
      </div>

Reduce potential crop damage by staying between the rows

<div>
       
       <p>Increasing the size of row-crop equipment can be expensive. Traditionally, row-crop equipment is size matched. As an example, purchasing a larger planter could require a larger corn head to have the same number of rows.<br> </p>
       <p>With AutoPath, you have flexibility when purchasing or upgrading equipment.</p>
       <ul>
        <li>AutoPath automatically creates guidance lines based on the width of each piece of equipment.
         <ul>
          <li>This works even if equipment widths differ from the planter width.</li>
         </ul></li>
        <li>By using a map of crop rows that’s created during planting, pre-planting tillage, or application, AutoPath creates guidance lines wherever they are needed for the operation at hand.</li>
        <li>It’s easy to change equipment width during spraying or harvest.
         <ul>
          <li>Simply enter the new track spacing and AutoPath automatically creates a new series of guidance lines based on that width.</li>
         </ul></li>
       </ul>
       
       <p>For the ultimate in spraying and harvesting performance, maximize your implement receiver investment by adding <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/ams/2022/model/autotrac_implement_guidance.html">AutoTrac Implement Guidance</a> when planting. AutoTrac Implement Guidance keeps your pass-to-pass guess rows as accurate as possible by steering the tractor off the guidance line when needed to keep the planter in the right place. It ensures that every row – including guess rows – is on the same spacing.</p>
      </div>

Easily use equipment of varying widths

<div>
       
       <p>One of the biggest challenges of corn harvest is knowing where to start harvesting.</p>
       <ul>
        <li>Finding the proper place to open a new harvest land can be difficult.</li>
        <li>Counting rows takes time.</li>
        <li>It can be hard to find wide or narrow guess rows, especially in windy conditions or at night.</li>
       </ul>
       <p>Starting harvest in the wrong rows wastes time – and there is no time to spare at harvest.</p>
       <ul>
        <li>Chasing down stray rows increases fuel usage, labor expenses, and machine hours.</li>
        <li>Grain quality can suffer, and losses can occur because the combine is not running at maximum capacity.</li>
       </ul>
       <p>All of this adds up to more time, more expense, and less money in your pocket.</p>
       <p> </p>
       <p>The AutoPath™ system addresses this harvest challenge easily, quickly, and accurately by creating guidance lines for the entire field based on the width of the corn head.</p>
       
       <p>When opening a new harvest land, simply drive to the general location that you would like to start. Find the closest guidance line, resume AutoTrac™ guidance system, and start harvesting. You can be confident that you will start in the right place and finish out with a full pass.</p>
       
       <p>AutoPath helps you locate harvest starting points quickly and easily. This saves money by reducing time, machine hours, fuel consumption, and grain damage or loss.</p>
      </div>

Quickly and accurately find the right starting location

<div>
       
       <p>You have little control over the challenges that weather can bring. Wind damaged crops are often blown down, hiding the rows and making it nearly impossible to see where to harvest. The AutoPath™ system addresses these issues by providing accurate guidance lines even when the crop rows cannot be seen.</p>
       <p> </p>
       <ul>
        <li><strong>AutoPath uses data gathered during the source operation</strong> <strong>(first pass) to map the location of each crop row.</strong> This data is used to create a series of guidance lines for the entire field which precisely follows the crop row, regardless of crop condition. You no longer need to manually create or reuse guidance lines, which can be very difficult when crop is down.</li>
        <li><strong>AutoPath guidance lines position the machine accurately to start in the right place.</strong> When harvesting down crop, it can be nearly impossible to know where to start operating. AutoPath gives you accurate starting points for opening new fields, even in tough field conditions.</li>
        <li>A<strong>utoPath guidance lines track crop rows accurately, even when rows are not visible.</strong> When operating in the field with down crop, it is disorienting to manually drive the machine. Twisted down crops make it easy for you to move off the proper line, increasing harvest time. AutoPath lines accurately follow crop rows, even when they are not visible.</li>
        <li><strong>AutoPath guidance lines allow the operator to focus on other important tasks</strong>. Harvesting in down crops can be overwhelming. Dealing with down crops increases the chance of slugging the machine. Unloading on the go is even more challenging in down crops. AutoPath gives you accurate guidance in all conditions, including down crops. This allows you to focus on other important tasks like crop feeding or unloading.</li>
       </ul>
       
      </div>