<ul>
<li>John Deere-designed rotary cutterbar</li>
<li>Patented diagonally cut module</li>
<li>Hydraulic cutterbar angle adjustment</li>
<li>Adjustable impeller conditioning hood</li>
</ul>


995 Rotary Platform

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Hay and Forage

<ul>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel </li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Provides a uniform cut with ground-following gauge wheels</li>
</ul>


1415D Draper Platforms

<ul>
<li>Cutterbar and frame profile gives uninterrupted crop flow</li>
<li>Strong, positive-feeding reel handles all crop conditions</li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Gauge wheels provide ground following for uniform cut</li>
</ul>


435D Draper

<ul>
<li>Structural, tubular frame</li>
<li>Hitch connects quickly and easily</li>
<li>Easy hydraulic operation</li>
</ul>


BU10 Series Bale Unroller

<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>


F310R Front Mount Mower-Conditioner

<ul>
<li>Compatible with 7, 8, 9, and 0 Series Balers</li>
<li>Carries 4&#215;6&#8242; bales</li>
<li>Transport width same as baler</li>
<li>Drop 1, 2, or 3 bales at a time</li>
</ul>


Plus2™ A420R Accumulator

<ul>
<li>Full-width feeding pickup</li>
<li>540-rpm PTO power shaft</li>
<li>Deep-flighted auger feeding</li>
<li>Hydraulic bale tension available</li>
</ul>


338 Twine/Wire Baler

<ul>
<li>Small drum cutting</li>
<li>Small drum gathering</li>
<li>Advanced header-height control</li>
<li>Row scrapers and cleaners prevent crop building</li>
</ul>


692 Rotary Harvesting Unit

Hay and Forage Mowing Equipment

<ul>
<li>In 30 minutes or less, you can switch from a rotary head to a 500D Draper head, which means you can harvest small grains and hay with one traction unit.</li>
<li>Quick-change reel teeth can be removed and replaced with minimal effort and tools. Then it’s back to cutting.</li>
<li>Fully integrated controls to the draper means no need for a secondary control box.</li>
</ul>


536D Draper

F350R Front Mount Mower-Conditioner

<ul>
<li>200hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24 mph transport speed</li>
</ul>


W200M Windrower

<ul>
<li>Rope System transport latch</li>
<li>Quick-remove shear hub assembly</li>
<li>DM5050 &#038; 5060 iMatch and Quick Coupler compatible</li>
<li>DM5070 Cat. 2 Quick Coupler compatible</li>
</ul>


DM50 Series Disc Mowers

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>


S250 Mower-Conditioner

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Windrowers and Draper Platforms

180A Auger Platform

<ul>
<li>36 ft. (11 m) cut width&nbsp;</li>
<li>Compatible with W200M, W235M, W235R and W260R</li>
<li>Hydraulic tilt John Deere cutter bar</li>
<li>Ground speed matching</li>
<li>Integrated controls</li>
</ul>


D636 Draper

1425D Draper Platforms

<ul>
<li>Greater capacity to process crop with 8-inch deeper belts </li>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel</li>
<li>Excellent visibility to cutterbar and belt</li>
</ul>


1445D Draper Platforms

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p>Large oval disks with free-swinging knives are used to cut the crop. </p>
       <p> </p>
       <p>Knives are free-swinging to reduce damage if a solid object is struck.</p>
       
       <ul dir="ltr">
        <li>
         <div>
          Knife tip speed is variable and can be adjusted from the cab to improve cutting in light crop conditions
         </div></li>
        <li>
         <div>
          Knives are reversible to double useful life
         </div></li>
        <li>
         <div>
          Knives are removed and replaced at the front of cutterbar for convenience
         </div></li>
        <li>All cutting disks are the same size</li>
        <li>Disks are computer-designed for improved wear and cutting performance</li>
        <li>Cutting disks are made of high-strength, austempered steel
         <ul>
          <li>
           <div>
            Austemper heat-treating process assures that the steel is thoroughly and evenly tempered for good wear characteristics
           </div></li>
         </ul></li>
       </ul>
       <h5>Wear caps</h5>
       
       <p>Wear caps are installed on each end of the cutting disks (except on the end disks where crop accelerators are used) to increase the wear life of the cutting disks and knife bolt nuts.</p>
       <p> </p>
       <p>Wear caps are open on the end to prevent debris from packing in close to the nut, making hardware and knives easier to change.</p>
       <p> </p>
       <p>They are made of austempered, heat-treated ductile steel.</p>
      </div>

Rotary cutterbar components

<div>
       
       <p>The John Deere-patented-design cutterbar is made from individual, diagonal-cut modules.</p>
       <p> </p>
       <p>Serviceability is easy. Modules can be removed individually while leaving the cutterbar attached to the frame.</p>
       <p> </p>
       <p>The modules are made of high-strength, nodular iron castings. Each module consists of two idler gears and one drive gear. The large-diameter idler gears transmit power from module to module. The idler gears turn at a relatively slow speed for added durability.</p>
       <p> </p>
       <p>A smaller-diameter pinion drive gear is used only to power the cutting disk. Power is not transmitted from one cutting disk to another except through the large-diameter idler gears.</p>
       <p> </p>
       <p>Modules are interchangeable. Disk rotation is determined by the position of the quill (A).</p>
       <p> </p>
       <p>There is a rubber oil seal between each cutting module.</p>
      </div>

Modular-design cutterbar

<div>
       
       <p>The 995 Rotary Platform features a single conditioning option: the impeller conditioner.</p>
       <h5>Impeller conditioner</h5>
       
       <p>The impeller conditioner works well in a wide variety of crop types and conditions. With proper adjustment, the impeller conditioner delivers a wide range of performance expectations to meet every producer's needs.</p>
       <h5>How an impeller conditioner works:</h5>
       
       <p>1. As hay is cut by rotating knives, 72 V-shaped tines pick up the plants and carry them through the machine. The free-swinging design reduces damage to the conditioner if rocks or other solid objects are struck.</p>
       <ul>
        <li>Tines are evenly spaced along the full width of the rotor</li>
       </ul>
       
       
       <p>2. As the plant passes through, it rubs against the conditioning hood (A) and other plants. The rubbing action removes the waxy surface from the stem of the plant to allow faster evaporation of moisture.</p>
       <p> </p>
       <p>3. The conditioner hood is adjustable to control the conditioning intensity. The wider the opening, the less aggressive the conditioning; this is used in legume-type crops. The smaller the opening, the more aggressive the conditioning; this is used more in grass hay.</p>
       <p> </p>
       <p>4. The impeller has two speeds to match crop conditioning requirements:</p>
       <ul>
        <li>Simply interchange the drive sheaves</li>
        <li>High speed of 865 rpm for grass hay</li>
        <li>Low speed of 624 rpm for legumes</li>
       </ul>
       <p>The impeller conditioner works well in legumes, especially alfalfa and most all-grass crops. Impeller conditioners are not recommended for cutting thick-stemmed or cane-type crops over 1.5-m (5-ft) tall.</p>
      </div>

How the impeller conditioner works

<div>
       
       <p>Forming shields are easily adjusted to control the material flow. This allows the operator to match the windrow width to the harvesting requirements.</p>
       <p> </p>
       <p>The adjustable swathboard controls the angle at which the crop flow contacts the forming shield, providing additional control of windrow formation.</p>
       
       <p>The windrow width is adjustable, without the use of tools, from a narrow windrow to a wide, fast-drying swath:</p>
       <ul>
        <li>91.4 cm (36 in.) up to 216 cm (85 in.) with the roll conditioner</li>
        <li>114.3 cm (45 in.) up to 216 cm (85 in.) with the impeller conditioner</li>
       </ul>
       <p><em>NOTE: The windrow width depends on the crop conditions and type of conditioner.</em></p>
      </div>

Specifications
Compatibility	4995, R450, W235, W260
Cutting width	5 m16 ft
Cutting height	1.7-17.8 cm0.7-7 in.
Overall width (transport)	5 m16.3 ft
Weight	With fluted steel conditioner2,371 kg5,229 lbWith urethane conditioner2,263 kg4,990 lbWith Tri-Lobe conditioner2,426 kg5,350 lb
Compatibility	4995, R450, W235, W260
Formation	Adjustable fluffboard and adjustable forming shields
Width	2.7 m8.8 ft
Diameter	59.4 cm23.4 in.
No. of V-tines	72
No. of speeds	Two-factory setting 624 or 865 rpmOptional 1,000 rpm
Drive	4-V powerband belt and sheaves
Conditioner hood	Adjustable, one lever
Width	2.7 m8.8 ft
Diameter	25.4 cm10 in.
Material	Urethane
Surface	Intermeshing, intermittent recessed cleats
Speed	Platform speed 865 at 2,650 rpm
Drive	Enclosed gear and shaft drive
Width	2.7 m8.8 ft
Diameter	25.4 cm10 in.
Material	Steel
Surface	Intermeshing flutes
Speed	Platform speed 865 at 2,650 rpm
Drive	Enclosed gear and shaft drive
Number of disks	10
Reservoir capacity	9.5 L12 U.S. qt
Guard angle	Adjustable; 0-8 degree (angle)
Cutting width	5 m16 ft
Cutting height	1.7-17.8 cm0.7-7 in.
Overall width (transport)	5 m16.3 ft
Weight	With impeller conditioner2,135 kg4,707 lbWith fluted steel conditioner2,371 kg5,229 lbWith urethane conditioner2,263 kg4,990 lbWith Tri-Lobe conditioner2,426 kg5,350 lb
Windrower width (depending on crop conditions)	With roll conditioner91-216 cm36-85 in.With impeller conditioner114-216 cm45-85 in.