<ul>
<li>The 8900A features a width of 114 to 130 inches depending on cutting unit size, giving more productivity in terms of acres mowed per hour.</li>
<li>Another productive advantage of the 8900A is the 8 miles per hour mowing speed.</li>
<li>Be productive but carry a light footprint: the 8900A comes in significantly lighter than its main competitor.</li>
<li>Versatility is a hallmark: 8900A has 26&#8243; and 30&#8243; verticutters and large capacity reel motors for scalping during over-seed operations.</li>
</ul>

8900A PrecisionCut™ Large-Area Reel Mower

Fairway Mowers

<ul>
<li>24.7 hp FT4 compliant Liquid-Cooled Diesel Engine</li>
<li>22” QA5 Cutting Units for a 100” total Width of Cut</li>
<li>3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive</li>
<li>Passcode-protected TechControl display</li>
</ul>

6500A PrecisionCut™ Fairway Mower

<ul>
<li>24.7 HP* engine</li>
<li>3-wheel smooth tire configuration</li>
<li>Passcode protected TechControl display</li>
<li>Hybrid system – reduced fuel consumption / noise reduction / hydraulic leak points</li>
<li>Width of Cut – 80&#8243; (5 18” QA5)</li>
</ul>

6080A E-Cut™ Hybrid Fairway Mower

<ul>
<li>TechControl™ Display locks in performance, and uptime</li>
<li>Set mowing turn speed to reduce scuffing</li>
<li>AutoPedal™ lowers fuel consumption and noise</li>
<li>Final Tier 4 without sacrificing horsepower</li>
</ul>

7700A PrecisionCut™ Fairway Mower

<ul>
<li>TechControl™ Display locks in performance, and uptime</li>
<li>Set mowing turn speed to reduce scuffing</li>
<li>AutoPedal™ lowers fuel consumption and noise</li>
<li>Proven hybrid design eliminates hydraulics from reel circuit</li>
</ul>

7500A E-Cut™ Hybrid Fairway Mower

<ul>
<li>24.7 hp FT4 compliant Liquid-Cooled Diesel Engine</li>
<li>18” QA5 Cutting Units for an 80” total Width of Cut</li>
<li>3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive</li>
<li>Passcode-protected TechControl display</li>
</ul>

6080A PrecisionCut™ Fairway Mower

7500A PrecisionCut™ Fairway Mower

<ul>
<li>TechControl™ Display locks in performance, and uptime</li>
<li>Final Tier 4 without sacrificing horsepower</li>
<li>Proven hybrid design eliminates hydraulics from reel circuit</li>
<li>Highly maneuverable, 3-wheel low PSI smooth tire configuration</li>
</ul>

8000A E-Cut™ Hybrid Fairway Mower

<ul>
<li>24.7 hp FT4 compliant Liquid-Cooled Diesel Engine</li>
<li>22” QA7 Cutting Units for a 100” total Width of Cut</li>
<li>3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive</li>
<li>Passcode-protected TechControl display</li>
</ul>

6700A PrecisionCut™ Fairway Mower

8700A PrecisionCut™ Fairway Mower

John Deere

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>

616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>

WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>

DH52 Series Offset Disks

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm3 (13 cu. in.) / 180 cm3 (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>

1470G Wheeled Harvester

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>

HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>

AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>

FC15M Flex Wing Rotary Cutter

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>

1010G Forwarder

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>

600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>

2550 E-Cut™ Hybrid Diesel Triplex Mower

Lawn and Garden

<ul>
<li>DigidriveTM drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>

TD13 Series Hay Tedder

<ul>
<li>Large, easy-access step and hand brace</li>
<li>Upgraded valve provides smooth hydraulics for precise control</li>
<li>Available field-install thumb option</li>
<li>Stabilizer, boom and swing locks accessible from the operator’s seat</li>
</ul>

260B Backhoe

<ul>
<li>Heavy-duty wear shields for added gear case protection</li>
<li>Rotor is helical shaped for higher efficiency</li>
<li>Skid shoes control depth</li>
<li>Category 2 quick hitch compatible</li>
</ul>

RT22 Series Rotary Tillers

<ul>
<li>High tensile, heavy-gauge steel frame</li>
<li>Tine position is adjustable. No tools required</li>
</ul>

AP12D Pallet Fork

<ul>
<li>Operating Width: 50 In.</li>
<li>7 tines at 1.25 In. diameter solid round steel </li>
<li>Multiple working widths to match tractor requirements</li>
<li>Increased uptime with quick-change capability&nbsp;</li>
</ul>

AM20 Series Manure Fork

<ul>
<li>Replaceable and adjustable ripper shanks</li>
<li>iMatchTM compatible</li>
<li>Reversible blade</li>
<li>Fixed tailgate</li>
</ul>

BB50L Series Box Blades

<ul>
<li>25.5-hp (19.0 kW)* iTorque™ Power System</li>
<li>48-in. (122 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology</li>
<li>Electronic throttle control and power two-wheel steer</li>
<li>4 year/500 hour bumper-to-bumper warranty</li>
</ul>

X590 Lawn Tractor with 48-in. Deck

Mowers

<ul>
<li>24 hp (17.9 kW)* iTorque™ Power System</li>
<li>54-in. (137 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology</li>
<li>Twin Touch™ forward and reverse foot pedals</li>
<li>4 year/500 hour bumper-to-bumper warranty</li>
</ul>

X570 Lawn Tractor with 54-in. Deck

<ul>
<li>23-hp (17.2-kW)* iTorque™ Power System</li>
<li>48-in. (122 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology</li>
<li>Power four-wheel steer</li>
<li>4 year/300 hour bumper-to-bumper warranty</li>
</ul>

X394 Lawn Tractor with 48-inch Deck

<ul>
<li>Five, 27-in. independent rotary decks with a 9-foot cutting width</li>
<li>Deep shell deck design with exclusive rear discharge chute</li>
<li>No-tool notch system for easy height-of-cut adjustments</li>
<li>LoadMatch™ for excellent climbing and cut quality</li>
</ul>

9009A TerrainCut™ Rough Mower

<ul>
<li>24-hp (17.9 kW)* FS series engine</li>
<li>54- or 60-in. High-capacity PRO mower deck with welded deck reinforcements</li>
<li>22.5-in. seat with adjustable armrests, springs and ComfortGlide™ suspension</li>
<li>Cut height adjustment dial adjusts mower in ¼-in. increments from 1.5 &#8211; 5 inches</li>
</ul>

Z730M ZTrak™ Zero Turn Mower

<ul>
<li>24 hp* (17.9 kW) V-Twin engine</li>
<li>54-in (137 cm) Accel Deep™ deck, compatible with optional MulchControl™ kit</li>
<li>Folding Rollover Protective Structure (ROPS)</li>
<li>18-in. cut and sewn seat with armrests and easy to read fuel gauge</li>
<li>4-year/300-hour bumper-to-bumper warranty</li>
</ul>

Z515E ZTrak™ Mower with 54-in. Deck

<ul>
<li>7-Iron™ II Mowing Deck</li>
<li>Gasoline Engine</li>
<li>Hydrostatic Drive Train</li>
<li>Commercial-grade Operator Seat</li>
</ul>

Z915E ZTrak™ Zero-Turn Mower

<ul>
<li>7-Iron™ PRO Mowing deck</li>
<li>Mulch On Demand Available</li>
<li>Electronic Fuel Injection</li>
<li>Gasoline Engine</li>
<li>California CARB Approved</li>
</ul>

Z945M EFI ZTrak™ Zero-Turn Mower

<div>
 
 <h5>More control with the TechControl display with a large easy-to-read screen</h5>
 
 Passcode-protected TechControl display enables quickly setting or changing mowing speed, turning speed, or transport speed to limit variations in performance by different operators.
 
 Quickly adjust the mow or transport speed to make sure mow speed is what is needed for the changing conditions. The setting can be adjusted precisely using a speedometer app on a smartphone or global positioning system (GPS) device.
 
 Use the TechControl to slow the machine during turns while mowing and protect against turf scuffing and aggressive turning operators.
  
 The turn speed control engages when in mow and the cutting units are lifted for turns. Once the turn is made and the cutting units are lowered, the machine speed returns to the set mow speed.
  
 The turn speed is a percentage of mow speed. When set to 100 percent, turn speed control is off or allows 100 percent of the mow speed in turns. Turn speed setting of 50 percent allows only 50 percent of the set mow speed to be reached during turns.
  
 Here is an example:
 Mow speed = 9.66 km/h (6 mph) Turn speed set at 50 percent Maximum turning speed will be 4.83 km/h (3 mph)
 
 The A-model PrecisionCut™ Mowers, E-Cut™ Hybrid Mowers, and TerrainCut™ Mowers have the latest in advanced diagnostics through the TechControl display. Most all diagnostics are performed while sitting in the operator’s seat.
  
 The TechControl has onboard visual diagnostics allowing quick and easy machine diagnostics, maximizing up time. The system allows technician to see inputs and outputs of the electrical system.  Also, the technician can see stored controller codes on the machine to aide in troubleshooting incidents that may have occurred while on the course.
  
 The TechControl will also display the notification for maintenance of the hydraulic and engine oils using service timers to notify when it has reached the time to perform the required service.
 
 Choose from a list of several languages to use for the TechControl.
  
 Operator warning notifications are incorporated into the TechControl and will alert the operator if a problem arises during operation.
  
  
 <table border="1" width="100%" cellspacing="2" cellpadding="2">
 <tbody>
 <tr>
 <td>Description</td>
 </tr>
 <tr>
 <td>Hydraulic over temp</td>
 </tr>
 <tr>
 <td>Hydraulic oil filter restriction</td>
 </tr>
 <tr>
 <td>Engine oil pressure low</td>
 </tr>
 <tr>
 <td>Engine coolant temperature</td>
 </tr>
 <tr>
 <td>Reel motor</td>
 </tr>
 <tr>
 <td>Battery voltage</td>
 </tr>
 </tbody>
 </table>
 </div>

TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics

<div>
 
 The 9009A TerrainCut and the 8900A PrecisionCut utilizes the same eHydro traction pump and wheel motors in the A-model take performance, traction, and operation to the next level. This is combined with the standard GRIP system that reduces wheel slip by sending flow from the front wheel to the opposite rear wheel.
  
 The system is designed to take on the most challenging course conditions ideal for undulating terrain, providing superior performance and traction out on the course.
  
 The traction system in the A-models is driven by a servo-controlled hydrostatic pump. The control of the pump is no longer mechanical linkages, but instead it is electronic. The design reduced the complexity of the drive system meaning no more linkages to adjust or repair decreased routine maintenance and providing reliable day-in/day-out operation.
  
 The end result is more options for mowing different terrain then just straight up and down. The standard GRIP system ensures that when mowing slopes on an angle the high side tire maintains tractions unlike like mechanical systems used on other rough mowers. This increases productivity in tight areas and reduces damage to turf from wheel slippage.
 
 The operator will benefit from eHydro, too. The pedal effort has been reduced, reducing the foot fatigue during many hours of mowing.
 </div>

eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities and lower maintenance

<div>
 
 For superior traction with a true hydraulic four-wheel drive (4WD), the GRIP all-wheel drive traction system is standard on the 8900A Large-Area Reel Mower. This system reduces wheel slip by sending flow from the front wheel to the opposite rear wheel.
  
 For example, if the front-right wheel starts to slip, hydraulic flow is diverted to the left-rear wheel to maintain positive traction. By allowing the flow to cross over to the opposite rear wheel, the system maintains traction not only while climbing straight up hills, but also on side hills, as well.
  
 The GRIP all-wheel drive traction system is always engaged when driving forward. There are no electronics to engage the 4WD system, simplifying the electrical system and the design of the valve at the rear of the machine.
  
 In reverse, a standard switch is provided that disengages 4WD. The switch senses that the reverse pedal has been depressed and shuts off flow to the rear drive wheels. This ensures that the front drive tires are doing the work in reverse rather than the rear tires, minimizing wheel slip and scuffing of turf when backing up an incline.
 </div>

GRIP all-wheel drive traction system provides superior traction by reducing wheel slip

<div>
 
 For superintendents who want stripes as straight as they are on the greens, the A-model PrecisionCut™ Mowers and E-Cut™ Hybrid Mowers do exactly that. Utilizing the same style steering cylinder as on the 2550 PrecisionCut and 2550 E-Cut Hybrid Riding Greens Mowers, the PrecisionCut and E-Cut Hybrid Mowers can mow the straightest lines of any mower in the industry today.
  
 Traditional hydraulic cylinders have a rod on only one side of the cylinder. The cylinder on the A-models has one rod that goes through both sides of the cylinder. This equalizes volume and pressure on both sides of the cylinder packing, helping the operator make   perfectly straight lines with little effort.
  
 This system also equalizes the steering effort, meaning easy turns whether turning to the right or to the left.
 </div>

Double-acting, single-rod hydraulic steering cylinder for lines as straight as a greens mower

<div>
 
 The 8900A PrecisionCut™ Large-Area Reel Mower is light weight to provide excellent results on the golf course. The lower weight helps reduce the overall foot print in fine turf conditions reducing compaction and turf stress. Along with the lower weight, the 8900A features 26.5 x12-12 turf tires for low footprint and maximum traction in the toughest conditions. This combination provides a strong traction package with low levels of ground compaction.
 </div>

Low machine weight and tires sized for proper weight distribution, traction, and low ground pressure

<div>
 
 Easier daily maintenance points are designed into the machine to assist operators with complete daily maintenance and to keep the machine running at peak performance, saving valuable time and money.
  
 For ease of service, all daily engine checks are easily accessible by raising the hood. These service points include an engine-oil level check, a coolant level check, hydraulic fluid level, and an air-restriction indicator.
  
 The A-model PrecisionCut™ Mowers, E-Cut™ Hybrid Mowers, and TerrainCut™ Mowers feature a radiator screen that is easily removed without tools and a tilt-out oil cooler for easy cleaning.
 </div>

Easily accessible daily service points mean less maintenance time and more time working

<div>
 
 LoadMatch is an electronic setting through the TechControl display that allows managers more control of the machine and how it is operated when out on the course.
  
 Most operators will mow as fast as the mow setting will allow, keeping their traction pedal all the way down. However, in some conditions this can lead to poor cut quality.
  
 One example is getting behind in mowing due to weather conditions. The grass is long and lush and to properly cut that amount of grass at one time, the operator should slow the traction speed. This allows the cutting units to maintain proper turning speed, process the grass, and properly cut in one pass. Not slowing down causes missed grass and an uneven appearance. This affects the after-cut appearance and also reduces productivity by having to mow a second time to properly cut the lush grass.
  
 The LoadMatch feature compensates the traction speed of machine to keep power to the cutting units. In the long, lush conditions described above with LoadMatch engaged, the operator would still have the traction pedal all the way down, but the machine would sense the load and slow the traction speed to properly cut the mowing pass. Once the load is reduced, the machine will return to the normal mow speed.
  
 LoadMatch puts the manager in control of cut quality instead of the operator.
 </div>

LoadMatch™ electronic setting compensates speed of machine to keep power to the cutting units to maintain cut quality

<div>
 
 The AutoPedal feature controls engine rpm and transport speed of the machine through the eHydro™ foot pedal controls. AutoPedal is similar to an automobile gas pedal operation; the more the forward pedal is pressed, the faster the machine moves and the higher the engine rpm; pressing the pedal less, the slower the machine moves and the lower the engine rpm.
  
 On conventional machines, the engine rpm is controlled by the operator by means of a manual or electric/manual throttle. Operators are trained to always operate the engine at wide-open throttle. Running at wide open throttle means running the engine at its fastest speed, which increases the sound levels and fuel usage.
  
 The AutoPedal system allows the engine to only run as fast as needed, meaning that as operators transport around the course, the engine speed is only as fast as needed for the transport speed. If the operator approaches play and stops, the engine rpm goes to idle. This makes transporting quieter and since the engine does not run full speed all the time, it reduces fuel consumption.
  
 Once the operator reaches the mowing site, engages the mow switch on the CommandARM™ controls, the engine rpm automatically increases to full throttle for mowing.
 </div>

AutoPedal™ feature lowers sound levels and fuel consumption during transport

<div>
 
 
 Many of the hybrid turfgrasses require aggressive maintenance practices to stimulate new lateral and vertical growth for a true and healthy playing surface. Frequent, light verticutting is an integral part of properly maintaining these cultivars as well as some of the more traditional turf types.
  
 The Quick-Adjust 7 (QA7) verticutters for the 8900A  PrecisionCut™ Large-Area Reel Mower and the 7200A and 2653B PrecisionCut Trim and Surrounds Mowers  make it easy to accomplish this task with quick adjustments and durable verticutter blades. The 7-in. (17.8-cm) verticutter blades are designed for efficient, consistent cutting and come in 26-in. (66.0-cm) or 30-in. (76.2-cm) widths to maximize productivity.
  
 For aggressive results, run the verticutters in the reverse direction by swapping the hydraulic lines to reverse the direction of flow at the reel motor.
 
 
 In addition to the blade configuration, the QA7 verticutter features a depth system that is truly easy to adjust. A simple front roller design allows for paralleling the roller to the verticutter blades for a premium cut.
  
 Depth is fine tuned with the rear roller. The Speed Link height-of-cut system is a popular feature on the QA7 reel cutting units, and the same system has been integrated in the QA7 verticutter as well.
  
 The Speed Link system ties both ends of the rear roller together with a spring-loaded rod, meaning adjustments can be performed from either end of the rear roller, automatically adjusting the other side at the same time. A worm gear design in the rear roller towers means that as one side is adjusted, the other side turns the exact same amount.
  
 Adjusting rear cutting units is now easier than ever. Adjustments can be performed by an electric drill or pneumatic tool with a 0.63-in. (16-mm) socket in seconds, saving time and money while getting the job done with high quality and efficiency. Maximum depth for operating the verticutters is 0.13-in. (3.2 mm).
  
 Travel speed will be reduced during verticutting based on blade depth setting and turf conditions. Maximum recommended travel speed with verticutters is 3 mph (4.83 km/h).
  
 Additional blades or removing of blades may be required and is dependent on the traction unit verticutters are being installed. Please check the operator’s manual for correct set up.
  
 NOTE:Electric or pneumatic impact tools cannot be used with the Speed Link depth system.
 </div>