<ul>
<li>24.7 HP* engine</li>
<li>3-wheel smooth tire configuration</li>
<li>Passcode protected TechControl display</li>
<li>Hybrid system – reduced fuel consumption / noise reduction / hydraulic leak points</li>
<li>Width of Cut – 100&#8243; (5 22” QA5)</li>
</ul>


6500A E-Cut™ Hybrid Fairway Mower

Fairway Mowers

<ul>
<li>24.7 hp FT4 compliant Liquid-Cooled Diesel Engine</li>
<li>22” QA5 Cutting Units for a 100” total Width of Cut</li>
<li>3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive</li>
<li>Passcode-protected TechControl display</li>
</ul>


6500A PrecisionCut™ Fairway Mower

<ul>
<li>24.7 HP* engine</li>
<li>3-wheel smooth tire configuration</li>
<li>Passcode protected TechControl display</li>
<li>Hybrid system – reduced fuel consumption / noise reduction / hydraulic leak points</li>
<li>Width of Cut – 80&#8243; (5 18” QA5)</li>
</ul>


6080A E-Cut™ Hybrid Fairway Mower

<ul>
<li>TechControl™ Display locks in performance, and uptime</li>
<li>Set mowing turn speed to reduce scuffing</li>
<li>AutoPedal™ lowers fuel consumption and noise</li>
<li>Final Tier 4 without sacrificing horsepower</li>
</ul>


7700A PrecisionCut™ Fairway Mower

<ul>
<li>TechControl™ Display locks in performance, and uptime</li>
<li>Set mowing turn speed to reduce scuffing</li>
<li>AutoPedal™ lowers fuel consumption and noise</li>
<li>Proven hybrid design eliminates hydraulics from reel circuit</li>
</ul>


7500A E-Cut™ Hybrid Fairway Mower

<ul>
<li>24.7 hp FT4 compliant Liquid-Cooled Diesel Engine</li>
<li>18” QA5 Cutting Units for an 80” total Width of Cut</li>
<li>3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive</li>
<li>Passcode-protected TechControl display</li>
</ul>


6080A PrecisionCut™ Fairway Mower

7500A PrecisionCut™ Fairway Mower

<ul>
<li>The 8900A features a width of 114 to 130 inches depending on cutting unit size, giving more productivity in terms of acres mowed per hour.</li>
<li>Another productive advantage of the 8900A is the 8 miles per hour mowing speed.</li>
<li>Be productive but carry a light footprint: the 8900A comes in significantly lighter than its main competitor.</li>
<li>Versatility is a hallmark: 8900A has 26&#8243; and 30&#8243; verticutters and large capacity reel motors for scalping during over-seed operations.</li>
</ul>


8900A PrecisionCut™ Large-Area Reel Mower

<ul>
<li>TechControl™ Display locks in performance, and uptime</li>
<li>Final Tier 4 without sacrificing horsepower</li>
<li>Proven hybrid design eliminates hydraulics from reel circuit</li>
<li>Highly maneuverable, 3-wheel low PSI smooth tire configuration</li>
</ul>


8000A E-Cut™ Hybrid Fairway Mower

<ul>
<li>24.7 hp FT4 compliant Liquid-Cooled Diesel Engine</li>
<li>22” QA7 Cutting Units for a 100” total Width of Cut</li>
<li>3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive</li>
<li>Passcode-protected TechControl display</li>
</ul>


6700A PrecisionCut™ Fairway Mower

8700A PrecisionCut™ Fairway Mower

John Deere

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

Lawn and Garden

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

<ul>
<li>Large, easy-access step and hand brace</li>
<li>Upgraded valve provides smooth hydraulics for precise control</li>
<li>Available field-install thumb option</li>
<li>Stabilizer, boom and swing locks accessible from the operator’s seat</li>
</ul>


260B Backhoe

<ul>
<li>Heavy-duty wear shields for added gear case protection</li>
<li>Rotor is helical shaped for higher efficiency</li>
<li>Skid shoes control depth</li>
<li>Category 2 quick hitch compatible</li>
</ul>


RT22 Series Rotary Tillers

<ul>
<li>High tensile, heavy-gauge steel frame</li>
<li>Tine position is adjustable. No tools required</li>
</ul>


AP12D Pallet Fork

<ul>
<li>Operating Width: 50 In.</li>
<li>7 tines at 1.25 In. diameter solid round steel </li>
<li>Multiple working widths to match tractor requirements</li>
<li>Increased uptime with quick-change capability&nbsp;</li>
</ul>


AM20 Series Manure Fork

<ul>
<li>Replaceable and adjustable ripper shanks</li>
<li>iMatchTM compatible</li>
<li>Reversible blade</li>
<li>Fixed tailgate</li>
</ul>


BB50L Series Box Blades

<ul>
<li>25.5-hp (19.0 kW)* iTorque™ Power System</li>
<li>48-in. (122 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology</li>
<li>Electronic throttle control and power two-wheel steer</li>
<li>4 year/500 hour bumper-to-bumper warranty</li>
</ul>


X590 Lawn Tractor with 48-in. Deck

Mowers

<ul>
<li>24 hp (17.9 kW)* iTorque™ Power System</li>
<li>54-in. (137 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology</li>
<li>Twin Touch™ forward and reverse foot pedals</li>
<li>4 year/500 hour bumper-to-bumper warranty</li>
</ul>


X570 Lawn Tractor with 54-in. Deck

<ul>
<li>23-hp (17.2-kW)* iTorque™ Power System</li>
<li>48-in. (122 cm) Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology</li>
<li>Power four-wheel steer</li>
<li>4 year/300 hour bumper-to-bumper warranty</li>
</ul>


X394 Lawn Tractor with 48-inch Deck

<ul>
<li>Five, 27-in. independent rotary decks with a 9-foot cutting width</li>
<li>Deep shell deck design with exclusive rear discharge chute</li>
<li>No-tool notch system for easy height-of-cut adjustments</li>
<li>LoadMatch™ for excellent climbing and cut quality</li>
</ul>


9009A TerrainCut™ Rough Mower

<ul>
<li>24-hp (17.9 kW)* FS series engine</li>
<li>54- or 60-in. High-capacity PRO mower deck with welded deck reinforcements</li>
<li>22.5-in. seat with adjustable armrests, springs and ComfortGlide™ suspension</li>
<li>Cut height adjustment dial adjusts mower in ¼-in. increments from 1.5 &#8211; 5 inches</li>
</ul>


Z730M ZTrak™ Zero Turn Mower

<ul>
<li>24 hp* (17.9 kW) V-Twin engine</li>
<li>54-in (137 cm) Accel Deep™ deck, compatible with optional MulchControl™ kit</li>
<li>Folding Rollover Protective Structure (ROPS)</li>
<li>18-in. cut and sewn seat with armrests and easy to read fuel gauge</li>
<li>4-year/300-hour bumper-to-bumper warranty</li>
</ul>


Z515E ZTrak™ Mower with 54-in. Deck

<ul>
<li>7-Iron™ II Mowing Deck</li>
<li>Gasoline Engine</li>
<li>Hydrostatic Drive Train</li>
<li>Commercial-grade Operator Seat</li>
</ul>


Z915E ZTrak™ Zero-Turn Mower

<ul>
<li>7-Iron™ PRO Mowing deck</li>
<li>Mulch On Demand Available</li>
<li>Electronic Fuel Injection</li>
<li>Gasoline Engine</li>
<li>California CARB Approved</li>
</ul>


Z945M EFI ZTrak™ Zero-Turn Mower

<div>
       
       <p>Power starts with the engine, and the 6080A, 6500A, and 6700A PrecisionCut™ and 6080A and 6500A E-Cut™ Hybrid Fairway Mowers feature a 3-cylinder, 18.4-kW (24.7-hp ) diesel engine that has a strong reputation for power and performance. The engine is FT44 compliant, without the use of a diesel oxidation catalyst (DOC) or diesel particulate filter (DPF) to lower up-front acquisition costs.</p>
       <p> </p>
       <p>The engine provides power for undulating conditions, while also being able to power fairway tender conditioners and rear roller power brushes while running any reel combination.</p>
       <p> </p>
       <p>The air-intake system is also designed to pull clean air from the front of the machine behind the operator's seat, rather than dirty air from the rear of the machine. This improves engine performance and efficiency during those hot, dusty times of the year.</p>
      </div>

18.4-kW (24.7-hp) Final Tier 4 (FT4) diesel engine offers plenty of power for mowing

<div>
       
       <p>Ninety percent of all hydraulic leaks occur in the reel hydraulic circuit, mainly due to the necessity of having flexible hoses extending from the front of the machine for the front reels.</p>
       <p> </p>
       <p>These hoses see a lot of flexing during the mowing day as cutting units are raised and lowered. Cutting units also steer and float to follow undulations, increasing fatigue for the reel motor hoses.</p>
       <p> </p>
       <p>The 6080A, 6500A, 7500A, and 8000A E-Cut™ Hybrid Fairway Mowers have eliminated all reel circuit leak points by removing all hydraulics from the cutting unit drive circuit.</p>
       <p> </p>
       <p>This has eliminated the following hydraulic components:</p>
       <ul>
        <li>
         <div>
          Reel drive section of hydraulic triple pump
         </div></li>
        <li>
         <div>
          Hydraulic reel motors
         </div></li>
        <li>
         <div>
          Backlapping valve
         </div></li>
        <li>
         <div>
          Flexible hoses
         </div></li>
        <li>
         <div>
          Fittings
         </div></li>
        <li>
         <div>
          Hard lines
         </div></li>
       </ul>
       <p>Fewer hydraulic components leads to fewer leaks, increasing confidence that the finely manicured turf will not be damaged by hot hydraulic oil spilled onto a playing surface before an important tournament. </p>
      </div>

Electric reel drive system eliminates all potential leak points in the reel circuit

<div>
       
       <p>The electric reel motors on the 6080A, 6500A, 7500A, and 8000A  E-Cut™ Hybrid Fairway Mowers are brushless, allowing them to be compact in size, roughly equal to that of today's hydraulic reel motors. The brushless motors are very efficient, leading to years of optimal performance with very minimal maintenance, and sealed for protection from the elements.<br><br> The motors are bidirectional and variable speed, meaning they can spin forward or reverse and at a range of rotational speeds. The motors spin forward for mowing operations and backward for backlapping operations.</p>
       <p> </p>
       <p>A poly-chain belt connects the motor shaft to the reel and rotates the reel when the cutting units are engaged. The internal components of the motor are sealed for long life, durability, and protection from the elements.</p>
       <p> </p>
       <p>Cutting units are easily removed from the cutting unit motors by loosening the two bolts securing the motor to the cutting unit, turning the motor approximately a quarter turn, and pulling the motor from the cutting unit. This can be done in a matter of seconds. A tether prevents damage to the wiring harness when the motor is removed.</p>
      </div>

Brushless electric reel motors for compact design and optimal efficiency

<div>
       
       <p>The reel circuit is powered by a 48-V, 180-amp alternator belt-driven by the engine. The alternator supplies constant power to the reel circuit and only generates 48 V when the mow system is engaged.</p>
       <p> </p>
       <p>Due to this design, no additional batteries are required to drive the reel motors on the 6080A, 6500A, 7500A, and 8000A E-Cut™ Hybrid Fairway Mowers. With traditional electrical mowing systems, the frequency of clip would change as the batteries drained while mowing.</p>
       <p> </p>
       <p>A battery pack begins to lose its power immediately when used, but not on the E-Cut Hybrids. Since they still use an engine to drive an alternator, the frequency of clip at the start of the day and at the end of the day is exactly the same, yielding unparalleled quality of cut from start to finish.</p>
       <p> </p>
       <p>Plus, the machine doesn't have to be plugged in to charge the batteries once the day's mowing is done.  The only limitation on run time with the E-Cut Hybrids is making sure the operator starts the day with a full fuel tank, just like with any other gas- or diesel-powered machine on the market today.</p>
       <p> </p>
       <p>The alternator only supplies power to the reel circuit. The remainder of the circuits are powered by a 12-V battery.</p>
      </div>

48-V, 180-amp alternator powers reel drive motors, requiring no additional batteries on unit

<div>
       
       <p>The 6080A, 6500A, and 6700A PrecisionCut™ and 6080A, 6500A, and 8000A E-Cut™ Hybrid Fairway Mowers help to make fairways that look like greens a reality.<br><br>An innovative, smooth tire design minimizes compaction and tire marking, especially in turns, giving a look similar to that from a riding greens mower. The GRIP all-wheel drive traction system works in combination with the smooth tire design to give a greens-quality appearance without sacrificing traction.<br><br>These machines also excel at weight distribution, ensuring each tire sees an equal amount of weight over a large tire surface area for a ground pressure that is friendly to the surface of the turf.<br><br>This three-wheel stance is common with riding greens mowers in the market today. This provides an after-cut appearance that is so good it looks like the fairways were mowed by a greens mower. The three-wheel stance also excels in maneuverability, allowing for tight turning at the end of passes for increased productivity.</p>
       
       <p>For those who prefer to use a treaded tire rather than a smooth tire, a fairway tread is also available through Parts.</p>
      </div>

Three-wheel stance and smooth tires for excellent maneuverability and after-cut appearance

<div>
       
       <h5>More control with the TechControl display with a large easy-to-read screen</h5>
       
       <p>Passcode-protected TechControl display enables quickly setting or changing mowing speed, turning speed, or transport speed to limit variations in performance by different operators.</p>
       
       <p>Quickly adjust the mow or transport speed to make sure mow speed is what is needed for the changing conditions. The setting can be adjusted precisely using a speedometer app on a smartphone or global positioning system (GPS) device.</p>
       
       <p>Use the TechControl to slow the machine during turns while mowing and protect against turf scuffing and aggressive turning operators.</p>
       <p> </p>
       <p>The turn speed control engages when in mow and the cutting units are lifted for turns. Once the turn is made and the cutting units are lowered, the machine speed returns to the set mow speed.</p>
       <p> </p>
       <p>The turn speed is a percentage of mow speed. When set to 100 percent, turn speed control is off or allows 100 percent of the mow speed in turns. Turn speed setting of 50 percent allows only 50 percent of the set mow speed to be reached during turns.</p>
       <p> </p>
       <p>Here is an example:</p>
       <p>Mow speed = 9.66 km/h (6 mph)<br>Turn speed set at 50 percent<br>Maximum turning speed will be 4.83 km/h (3 mph)</p>
       
       <p>The A-model PrecisionCut™ Mowers, E-Cut™ Hybrid Mowers, and TerrainCut™ Mowers have the latest in advanced diagnostics through the TechControl display. Most all diagnostics are performed while sitting in the operator’s seat.</p>
       <p> </p>
       <p>The TechControl has onboard visual diagnostics allowing quick and easy machine diagnostics, maximizing up time. The system allows technician to see inputs and outputs of the electrical system.  Also, the technician can see stored controller codes on the machine to aide in troubleshooting incidents that may have occurred while on the course.</p>
       <p> </p>
       <p>The TechControl will also display the notification for maintenance of the hydraulic and engine oils using service timers to notify when it has reached the time to perform the required service.</p>
       
       <p>Choose from a list of several languages to use for the TechControl.</p>
       <p> </p>
       <p>Operator warning notifications are incorporated into the TechControl and will alert the operator if a problem arises during operation.</p>
       <p> </p>
       <p> </p>
       <table border="1" width="100%" cellspacing="2" cellpadding="2">
        <tbody>
         <tr>
          <td><p align="center"><strong>Description</strong></p></td>
         </tr>
         <tr>
          <td><p align="center">Hydraulic over temp</p></td>
         </tr>
         <tr>
          <td><p align="center">Hydraulic oil filter restriction</p></td>
         </tr>
         <tr>
          <td><p align="center">Engine oil pressure low</p></td>
         </tr>
         <tr>
          <td><p align="center">Engine coolant temperature</p></td>
         </tr>
         <tr>
          <td><p align="center">Reel motor</p></td>
         </tr>
         <tr>
          <td><p align="center">Battery voltage</p></td>
         </tr>
        </tbody>
       </table>
      </div>

TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics

<div>
       
       <p>LoadMatch is an electronic setting through the TechControl display that allows managers more control of the machine and how it is operated when out on the course.</p>
       <p> </p>
       <p>Most operators will mow as fast as the mow setting will allow, keeping their traction pedal all the way down. However, in some conditions this can lead to poor cut quality.</p>
       <p> </p>
       <p>One example is getting behind in mowing due to weather conditions. The grass is long and lush and to properly cut that amount of grass at one time, the operator should slow the traction speed. This allows the cutting units to maintain proper turning speed, process the grass, and properly cut in one pass. Not slowing down causes missed grass and an uneven appearance. This affects the after-cut appearance and also reduces productivity by having to mow a second time to properly cut the lush grass.</p>
       <p> </p>
       <p>The LoadMatch feature compensates the traction speed of machine to keep power to the cutting units. In the long, lush conditions described above with LoadMatch engaged, the operator would still have the traction pedal all the way down, but the machine would sense the load and slow the traction speed to properly cut the mowing pass. Once the load is reduced, the machine will return to the normal mow speed.</p>
       <p> </p>
       <p>LoadMatch puts the manager in control of cut quality instead of the operator.</p>
      </div>

LoadMatch™ electronic setting compensates speed of machine to keep power to the cutting units to maintain cut quality

<div>
       
       <p>The traction system in the A-models is driven by a servo-controlled hydrostatic pump. The control of the pump is no longer mechanical linkages, but instead it is electronic.</p>
       <p> </p>
       <p>In total, approximately 94 parts have been eliminated from the traction drive system along with four adjustments compared to prior models. The design reduced the complexity of the drive system, which means no more linkages to adjust or repair, decreased routine maintenance, and more reliable day-in/day-out operation.</p>
       
       <p>The operator will like the eHydro pump, too. The pedal effort has been reduced, thus reducing foot fatigue during many hours of mowing.</p>
      </div>

eHydro™ hydrostatic pump for premium ease of use

<div>
       
       <p>The standard GRIP all-wheel drive traction system transfers hydraulic flow from wheels that slip to wheels that grip. For example, if the right front wheel starts to slip, hydraulic flow goes to the left front and rear tires to maintain traction power. This helps provide maximum traction in undulating conditions.</p>
       <p> </p>
       <p>The GRIP all-wheel drive traction system is standard equipment with the 6080A, 6500A, and 6700A PrecisionCut™ and 6080A and 6500A E-Cut™ Hybrid Fairway Mowers and is also engaged at all times, whether in mow or in transport. A check valve in the rear motor puts the machine in two-wheel drive (2WD) in reverse to minimize any potential scuffing.</p>
      </div>

GRIP all-wheel drive traction system moves flow from wheels that slip to those that grip

<div>
       
       <p>For superintendents who want stripes as straight as they are on the greens, the A-model PrecisionCut™ Mowers and E-Cut™ Hybrid Mowers do exactly that. Utilizing the same style steering cylinder as on the 2550 PrecisionCut and 2550 E-Cut Hybrid Riding Greens Mowers, the PrecisionCut and E-Cut Hybrid Mowers can mow the straightest lines of any mower in the industry today.</p>
       <p> </p>
       <p>Traditional hydraulic cylinders have a rod on only one side of the cylinder. The cylinder on the A-models has one rod that goes through both sides of the cylinder. This equalizes volume and pressure on both sides of the cylinder packing, helping the operator make   perfectly straight lines with little effort.</p>
       <p> </p>
       <p>This system also equalizes the steering effort, meaning easy turns whether turning to the right or to the left.</p>
      </div>

Double-acting, single-rod hydraulic steering cylinder for lines as straight as a greens mower

<div>
       
       <p>Easier daily maintenance points are designed into the machine to assist operators with complete daily maintenance and to keep the machine running at peak performance, saving valuable time and money.</p>
       <p> </p>
       <p>For ease of service, all daily engine checks are easily accessible by raising the hood. These service points include an engine-oil level check, a coolant level check, hydraulic fluid level, and an air-restriction indicator.</p>
       <p> </p>
       <p>The A-model PrecisionCut™ Mowers, E-Cut™ Hybrid Mowers, and TerrainCut™ Mowers feature a radiator screen that is easily removed without tools and a tilt-out oil cooler for easy cleaning.</p>
      </div>

Easily accessible daily service points mean less maintenance time and more time working

<div>
       
       <p>The 6500A, 6700A, 7500A, 7700A, and 8700A PrecisionCut™ and 6500A and 7500A E-Cut™ Hybrid Fairway Mowers all have cutting units that contact up stops for transport. These up stops are rubber and limit cutting units from swinging during transport. The lift system also folds the two wing units inside the tires to limit possibility of damage to the wing units when transporting through and around objects on the course.</p>
      </div>