7700A PrecisionCut™ Fairway Mower

Model:

TechControl™ Display locks in performance, and uptime
Set mowing turn speed to reduce scuffing
AutoPedal™ lowers fuel consumption and noise
Final Tier 4 without sacrificing horsepower

Specifications
Maximum rated horsepower	At 2800 rpm ISOC: 31 kWAt 2800 rpm ISOC: 41.6 hp
Drive pump	Tandem gear pump
Ground pressure	69 kPa10 psi
Throttle	Automatic controls with AutoPedal foot controls; manual control through TechControl display
Operator display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Mowing speed	0-12.8 km/h0-8.0 mph
Cutting unit size	Quick Adjust QA7: 55.9 cm22 in.
Total width of cut	254 cm100 in.
Reel diameter	17.8 cm7 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	10 Blade: 1.06 mm/km/h10 Blade: 0.067 in./mph8 Blade: 1.33 mm/km/h8 Blade: 0.084 in./mph
Type	Direct Inject Turbocharged Diesel
Compliant emission regulation	United States and Canada Tier 4
Horsepower	Maximum rated horsepowerAt 2800 rpm ISOC: 31 kWAt 2800 rpm ISOC: 41.6 hp
Cylinders	Three
Displacement	1.568 L95.69 cu in.
Air cleaner	2-stage dry element
Fuel	Diesel up to B20 compliant
Cooling system	Liquid centrifugal pump; forward machine location for optimum cooling
Drive pump	Tandem gear pump
Hydraulic system capacity	37.8 L10 U.S. gal.
Fuel tank capacity	60.6 L16 U.S. gal.
Steering	Hydraulic power with double acting steering cylinder
Front drive tires	26.5x14-12 turf
Steering tires	20x12X10-8 turf
Ground pressure	69 kPa10 psi
Brakes	Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS	Standard; meets ISO 21299 Standard
Throttle	Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse	2-pedal
Mower lift	One-touch single handle
Parking brake	Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat	Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO	Electric Switch on Command Arm
Tilt steering	Left Foot operated for easy adjustment
Operator display	TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage	Cup holder; two-way radio; large operator storage located on left hand side of operator station
Height with ROPS	224 cm88 in.
Length	323 cm127 in.
Transport width	287 cm113 in.
Mowing position width	295 cm116 in.
Ground speed	Mowing0-12.8 km/h0-8.0 mphTransport0-18.5 km/h0-11.5 mphReverse0-6.4 km/h0-5 mph
Number	Five
Size	Quick Adjust QA7: 55.9 cm22 in.
Total width of cut	254 cm100 in.
Height of cut	Ten-blade QA7: 6.3-50.8 mmTen-blade QA7: 0.25-2.0 in.Eight-blade QA7: 6.3-50.8 mmEight-blade QA7: 0.25-2.0 in.
Frequency of clip (FOC Reels) OR Blade tip speed (decks)	RollersFront and rear: 7.6 mm3 in.10 Blade: 1.06 mm/km/h10 Blade: 0.067 in./mph8 Blade: 1.33 mm/km/h8 Blade: 0.084 in./mph
Reel diameter	17.8 cm7 in.
Measuring standard	ISO 11201
Attachments installed	FTCs, reels engaged

View Product Brochure

7700A PrecisionCut™ Fairway Mower

TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics

eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities

GRIP All-Wheel Drive Traction System provides superior traction by reducing wheel slip

Double-acting, single-rod hydraulic steering cylinder for lines as straight as a greens mower

Tires sized for proper weight distribution and a low ground pressure

Easily accessible daily service points mean less maintenance time and more time working

LoadMatch™ electronic setting compensates speed of machine to keep power to the cutting units to maintain cut quality

AutoPedal™ feature lowers sound levels and fuel consumption during transport

Quick-Adjust 7 cutting units have Rotate for Service (RFS) feature allowing access to bedknife

Cutting units are stable and fold inside the front tires for easy transporting

Similar Products

6500A PrecisionCut™ Fairway Mower

6080A E-Cut™ Hybrid Fairway Mower

7500A E-Cut™ Hybrid Fairway Mower

6080A PrecisionCut™ Fairway Mower

7500A PrecisionCut™ Fairway Mower

8900A PrecisionCut™ Large-Area Reel Mower

8000A E-Cut™ Hybrid Fairway Mower

6700A PrecisionCut™ Fairway Mower