<ul>
<li>Epicyclic knife drive increases drive capacity</li>
<li>Raised-height skid shoe</li>
<li>Less reel, mounting, and drive parts</li>
<li>Easy adjustments reduce downtime</li>
</ul>


625F HydraFlex™Cutting Platform

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Auger Platforms

<ul>
<li>HydraFlex™ float system improves operator control</li>
<li>Epicyclic knife drive increases drive capacity</li>
<li>600 Flex Header height sensors for rigid mode</li>
<li>Less reel, mounting, and drive parts</li>
</ul>


635F HydraFlex™ Cutting Platform

<ul>
<li>Epicyclic knife drive to increase drive capacity</li>
<li>Safe and damage-free storage</li>
<li>Raised-height skid shoe</li>
<li>Perma-Glide™ floating divider points</li>
</ul>


622F HydraFlex™ Cutting Platform

630F HydraFlex™ Cutting Platform

<ul>
<li>Epicyclic knife drive increases drive capacity</li>
<li>Raised-height skid shoe</li>
<li>Less reel, mounting, and drive parts</li>
<li>HydraFlex™ float system improves operator control</li>
</ul>


620F HydraFlex™ Cutting Platform

Harvesting Equipment

<ul>
<li>13.6 L, 555 HP engine</li>
<li>Up to 20 mph transport speed</li>
<li>4.6 mph top harvest speed</li>
<li>Up to 20% greater fuel efficiency<sup>1</sup></li>
<li>8% reduction in wrap and hauling costs<sup>1</sup></li>
</ul>


CP770 Cotton Picker

<ul>
<li>Hydrafloat™ allows the operator to match changing field conditions</li>
<li>Dual-knife drive system is timed</li>
<li>Cutterbar is closer to the ground</li>
</ul>


730D Draper Platform

<ul>
<li>Quick connect design for easy removal </li>
<li>40”, 38”, and 36” row spacing </li>
<li>High capacity 13” diameter cross auger</li>
<li>Heavy-duty mainframe </li>
</ul>


SH8R Cotton Stripper Header: 8-Row Rigid

<ul>
<li>Combine Advisor™ package helps to set, optimize and automate main combine functions when conditions change</li>
<li>Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating</li>
<li>Comfortable S700 cab is common with tractors and sprayers for ease of use</li>
<li>Continued quality manufacturing of S-Series combines maximizes uptime and productivity</li>
</ul>


S770 Combine

<ul>
<li>630 Max engine horsepower</li>
<li>4.6 bu/s peak unload rate</li>
<li>420-bushel power folding grain tank</li>
<li>JDLink™ modem</li>
</ul>


X9 1000 Combine

<ul>
<li>Capture more crop in rolling and uneven terrain with a total wing range of 40”</li>
<li>Experience the best of both worlds with a flexible cutterbar on a hinged draper</li>
<li>Easily cut all crops with a consistent reel-to-cutterbar distance and improved reel torque</li>
<li>Reduce cutterbar loss with Grain Saver Draper Belts</li>
</ul>


HD45F Hinged Frame, Flexible Cutterbar Draper

<ul>
<li>Harvest crops as close as possible to the ground with the HydraFlex™ cutterbar</li>
<li>Minimize grain loss with a two-speed center feed section</li>
<li>Enable higher harvesting speed without sacrificing cut quality with a 4” double cut, dual drive, shaft driven cutterbar</li>
<li>Get more done by eliminating header calibrations</li>
</ul>


RD45F HydraFlex™ Draper

<ul>
<li>Minimize tire and track damage from stubble with Stalk Deflectors</li>
<li>Easily harvest down and leaning corn with Active End Fenders </li>
<li>Size residue less than 6 inches with RowMax™ Chopping Stalk Rolls</li>
</ul>


C18R Corn Head

C16R Corn Head

C12R Corn Head

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p>The HydraFlex system hydraulically controls the float of the cutterbar by a simple turn of a knob in the cab. This provides exceptional cutterbar flexibility throughout the entire working pressure range. Higher ground speeds can be accomplished with HydraFlex, compared to the conventional float systems.</p>
       <p> </p>
       <p><strong>Feature benefit:</strong></p>
       <ul>
        <li>The mechanical linkage is replaced by float arms with hydraulic cylinders at every channel. These cylinders provide the cutterbar with the ability to float over uneven ground conditions with improved operator control. Reference the operator’s manual for settings recommendations.</li>
       </ul>
       <p><em>  NOTE: The hydraulic cylinders will be on every other channel on 630F and 635F models in model year 2022.</em></p>
       <ul>
        <li>The platform HydraFlex system with an accumulator maintains a constant ground pressure over changing ground conditions. Manual mode is for locking out the cutterbar in the rigid mode.</li>
       </ul>
       
       <h5>Functionality</h5>
       
       <p>In automatic mode, the operator sets a desired cutterbar ground pressure, and the system will maintain this setting. If a different set point is desired, the operator adjusts the encoder on the armrest board, and an updated cutterbar float pressure reading will be shown on the cornerpost display. For increased ground following in uneven terrain, decrease cutterbar pressure to make the cutterbar heavy to the ground. If soil pushing occurs, increase the cutterbar pressure to make the cutterbar lighter to the ground.</p>
      </div>

HydraFlex™ float system improves operator control

<div>
       
       <p>The heavy-duty epicyclic knife drive gearbox provides an enhanced knife-drive system that increases drive capacity with less vibration and improved reliability.</p>
       <h5>Feature benefit:</h5>
       
       <ul>
        <li>Provides high level of reliability and durability</li>
        <li>Minimizes vibration</li>
        <li>Fast, efficient cutting action for higher harvesting speeds</li>
       </ul>
       
       <h5>Functionality:</h5>
       
       <ul>
        <li>89-mm (3.5-in.) knife stroke adds a more efficient cutting action. The increased stroke improves the cutterbar's ability to cut even in adverse conditions, such as large-stemmed crops or weeds, without plugging.</li>
        <li>Knife speed is 520 rpm.</li>
        <li>Reliability is improved with an in-line versus wobble-geometry knife head, which oscillates in a straight line and not through a radius like the previous knife drive.</li>
        <li>Knife head and gearbox attachment are improved. Two cap screws can be easily removed if any service to the knife is required.</li>
       </ul>
      </div>

Epicyclic knife drive increases drive capacity

<div>
       
       <p>John Deere’s single-point header latching system provides combine operators a fast and easy method for connecting all front-end equipment. One easy motion of the lever connects the electrical and hydraulic circuits along with header retaining pins.<br><br><strong>Feature benefit:</strong></p>
       <ul>
        <li>Reduces the time required to change over headers</li>
        <li>No tools required to remove headers for transport or storage</li>
       </ul>
       <p><strong>Functionality:<br><br></strong>The enhanced single-point latching system, includes a valve assembly mounted to all platform and corn head back sheets. These assemblies include an orifice valve unique to the header type and a pressure override valve. Together, these valves ensure the performance and reliability of header hydraulic functions.</p>
      </div>

625F HydraFlex™Cutting Platform

Similar Products

635F HydraFlex™ Cutting Platform

622F HydraFlex™ Cutting Platform

630F HydraFlex™ Cutting Platform

620F HydraFlex™ Cutting Platform