<ul>
<li>In 30 minutes or less, you can switch from a rotary head to a 500D Draper head, which means you can harvest small grains and hay with one traction unit.</li>
<li>Quick-change reel teeth can be removed and replaced with minimal effort and tools. Then it’s back to cutting.</li>
<li>Fully integrated controls to the draper means no need for a secondary control box.</li>
</ul>


530D Draper

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Hay and Forage

<ul>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel </li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Provides a uniform cut with ground-following gauge wheels</li>
</ul>


1415D Draper Platforms

<ul>
<li>Cutterbar and frame profile gives uninterrupted crop flow</li>
<li>Strong, positive-feeding reel handles all crop conditions</li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Gauge wheels provide ground following for uniform cut</li>
</ul>


435D Draper

<ul>
<li>Structural, tubular frame</li>
<li>Hitch connects quickly and easily</li>
<li>Easy hydraulic operation</li>
</ul>


BU10 Series Bale Unroller

<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>


F310R Front Mount Mower-Conditioner

<ul>
<li>Compatible with 7, 8, 9, and 0 Series Balers</li>
<li>Carries 4&#215;6&#8242; bales</li>
<li>Transport width same as baler</li>
<li>Drop 1, 2, or 3 bales at a time</li>
</ul>


Plus2™ A420R Accumulator

<ul>
<li>Full-width feeding pickup</li>
<li>540-rpm PTO power shaft</li>
<li>Deep-flighted auger feeding</li>
<li>Hydraulic bale tension available</li>
</ul>


338 Twine/Wire Baler

<ul>
<li>Small drum cutting</li>
<li>Small drum gathering</li>
<li>Advanced header-height control</li>
<li>Row scrapers and cleaners prevent crop building</li>
</ul>


692 Rotary Harvesting Unit

Hay and Forage Mowing Equipment

536D Draper

F350R Front Mount Mower-Conditioner

<ul>
<li>200hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24 mph transport speed</li>
</ul>


W200M Windrower

<ul>
<li>Rope System transport latch</li>
<li>Quick-remove shear hub assembly</li>
<li>DM5050 &#038; 5060 iMatch and Quick Coupler compatible</li>
<li>DM5070 Cat. 2 Quick Coupler compatible</li>
</ul>


DM50 Series Disc Mowers

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>


S250 Mower-Conditioner

<ul>
<li>John Deere-designed rotary cutterbar</li>
<li>Patented diagonally cut module</li>
<li>Hydraulic cutterbar angle adjustment</li>
<li>Adjustable impeller conditioning hood</li>
</ul>


995 Rotary Platform

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Windrowers and Draper Platforms

180A Auger Platform

<ul>
<li>36 ft. (11 m) cut width&nbsp;</li>
<li>Compatible with W200M, W235M, W235R and W260R</li>
<li>Hydraulic tilt John Deere cutter bar</li>
<li>Ground speed matching</li>
<li>Integrated controls</li>
</ul>


D636 Draper

1425D Draper Platforms

<ul>
<li>Greater capacity to process crop with 8-inch deeper belts </li>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel</li>
<li>Excellent visibility to cutterbar and belt</li>
</ul>


1445D Draper Platforms

View Product Brochure

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p>500D Draper has an interchangeable rotary platform:</p>
       <ul>
        <li>Interchangeable on W235 or W260 traction units in 30 minutes or less</li>
        <li>Growers can use one traction unit for harvesting both small grains and hay</li>
       </ul>
      </div>

Interchangeable with John Deere rotary platforms

<div>
       <h5>Center-driven belts</h5>
       
       <ul>
        <li>Deliver increased torque</li>
        <li>Enable greater productivity with minimal belt slippage</li>
        <li>Increase performance in heavy crop conditions</li>
       </ul>
       
       
       <ul>
        <li>Draper belts on the 500D are driven from the center of the platform
         <ul>
          <li>Delivers increased belt performance compared to drapers with end-driven belts</li>
         </ul></li>
       </ul>
       <h5>Belt drive motors</h5>
       
       <p>Due to the motors pulling the belt (instead of pushing in an end drive system), there is less slack in the belt. This delivers an increase in belt torque.</p>
       <p> </p>
       <p>As a result, producers will experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.</p>
      </div>

Higher productivity with center-driven belts

<div>
       
       <p>The 500D Series includes an improved reel that increases durability in heavy crop conditions.</p>
       <p> </p>
       
       <ul>
        <li>Easy reel tooth replacement is done with a 90-degree turn with a wrench. It will allow the reel tooth to be removed and replaced.</li>
        <li>Additional teeth can be added at any location along the extruded tooth bar.</li>
       </ul>
       <p> </p>
       <h3> </h3>
      </div>

Strong, positive-feeding reel handles all crop conditions

<div>
       
       <p>Sales, parts, and service support from a local John Deere dealer offer overnight parts delivery and a well-trained support staff.</p>
      </div>

John Deere parts and service support provide uptime for a timely harvest

<div>
       
       <p>The draper hydraulic pump control maintains knife, belt, and reel speeds regardless of engine rpm changes.</p>
       <ul>
        <li>Results in uniform cut quality and windrow formation regardless of the terrain or engine load</li>
        <li>Reduces crop loss or shatter</li>
       </ul>
      </div>

Draper hydraulic pump control logic delivers constant header speed

<div>
       
       <p>John Deere 525D, 530D, and 536D Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).</p>
       <ul>
        <li>Larger windrows to match combine or self-propelled forage harvester</li>
        <li>Match narrower-width drapers with higher-capacity harvesting</li>
        <li>Place higher-density windrows in front of harvesters when yields are low</li>
        <li>Discharge two windrows side by side for uniform combine or forage harvester feeding</li>
       </ul>
       
       
       
      </div>

Specifications
Cutterbar - Type	SCH® Easy Cut with roller guides, spring steep guards, and bolted sectionsStandard: single knifeOptional: dual knife
Cut width (length)	9.1 m30 ft
Reel type	Hydraulic
Fingers	Plastic
Belt width	V-guided draper belt: 106.7 cm42 in.
Transport length, hitch extended	10.5 m34.6 ft
Type	SCH® Easy Cut with roller guides, spring steep guards, and bolted sectionsStandard: single knifeOptional: dual knife
Cut width (length)	9.1 m30 ft
Knife drive	Two hydraulic motors and two knife drives
Knife speed	1,100 to 1,440 spm
Stroke length	84 mm3.3 in.
Cutterbar tilt	Hydraulic, adjustable from cab
Reel type	Hydraulic
Number of bats	Six
Fingers	Plastic
Diameter	1118 mm44 in.
Height control	Hydraulic, adjustable from cab
Speed control	Hydro handle, in cab
Reel lift	Hydraulic, adjustable from cab
Reel fore and aft	Hydraulic, adjustable from cab
Belt width	V-guided draper belt: 106.7 cm42 in.
Delivery opening width	Delivery, double swath opening: 137.2 cm54 in.Delivery, single swath opening: 203.2 cm80 in.
Delivery opening height	205.7 cm81 in.
Draper drive	Two hydraulic motors
Operating speed	0 to 232 m/min0 to 760 fpm
Speed control	Adjustable in windrower cab
Remote canvas speed control	Standard
Deck tilt	Standard
Deck extensions	Optional, dealer-installed deck extensions: 35.6 cm14 in.
Operating width (field)	9.1 m30 ft
Transport width (reel fully retracted)	2.6 m8.5 ft
Transport height	2.44 m8 ft
Transport length, hitch extended	10.5 m34.6 ft
Approximate weight (base platform without reel)	1232 kg3513 lb
Approximate weight (base platform with reel)	2710 kg5975 lb
Gauge wheels	Adjustable castoring gauge wheel optional
Integrated slow speed transport system	Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table