<ul>
<li>Cutterbar and frame profile gives uninterrupted crop flow</li>
<li>Strong, positive-feeding reel handles all crop conditions</li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Gauge wheels provide ground following for uniform cut</li>
</ul>


440D Draper

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Hay and Forage

<ul>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel </li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Provides a uniform cut with ground-following gauge wheels</li>
</ul>


1415D Draper Platforms

435D Draper

<ul>
<li>Structural, tubular frame</li>
<li>Hitch connects quickly and easily</li>
<li>Easy hydraulic operation</li>
</ul>


BU10 Series Bale Unroller

<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>


F310R Front Mount Mower-Conditioner

<ul>
<li>Compatible with 7, 8, 9, and 0 Series Balers</li>
<li>Carries 4&#215;6&#8242; bales</li>
<li>Transport width same as baler</li>
<li>Drop 1, 2, or 3 bales at a time</li>
</ul>


Plus2™ A420R Accumulator

<ul>
<li>Full-width feeding pickup</li>
<li>540-rpm PTO power shaft</li>
<li>Deep-flighted auger feeding</li>
<li>Hydraulic bale tension available</li>
</ul>


338 Twine/Wire Baler

<ul>
<li>Small drum cutting</li>
<li>Small drum gathering</li>
<li>Advanced header-height control</li>
<li>Row scrapers and cleaners prevent crop building</li>
</ul>


692 Rotary Harvesting Unit

Hay and Forage Mowing Equipment

<ul>
<li>In 30 minutes or less, you can switch from a rotary head to a 500D Draper head, which means you can harvest small grains and hay with one traction unit.</li>
<li>Quick-change reel teeth can be removed and replaced with minimal effort and tools. Then it’s back to cutting.</li>
<li>Fully integrated controls to the draper means no need for a secondary control box.</li>
</ul>


536D Draper

F350R Front Mount Mower-Conditioner

<ul>
<li>200hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24 mph transport speed</li>
</ul>


W200M Windrower

<ul>
<li>Rope System transport latch</li>
<li>Quick-remove shear hub assembly</li>
<li>DM5050 &#038; 5060 iMatch and Quick Coupler compatible</li>
<li>DM5070 Cat. 2 Quick Coupler compatible</li>
</ul>


DM50 Series Disc Mowers

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>


S250 Mower-Conditioner

<ul>
<li>John Deere-designed rotary cutterbar</li>
<li>Patented diagonally cut module</li>
<li>Hydraulic cutterbar angle adjustment</li>
<li>Adjustable impeller conditioning hood</li>
</ul>


995 Rotary Platform

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Windrowers and Draper Platforms

180A Auger Platform

<ul>
<li>36 ft. (11 m) cut width&nbsp;</li>
<li>Compatible with W200M, W235M, W235R and W260R</li>
<li>Hydraulic tilt John Deere cutter bar</li>
<li>Ground speed matching</li>
<li>Integrated controls</li>
</ul>


D636 Draper

1425D Draper Platforms

<ul>
<li>Greater capacity to process crop with 8-inch deeper belts </li>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel</li>
<li>Excellent visibility to cutterbar and belt</li>
</ul>


1445D Draper Platforms

View Product Brochure

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p>The C-shaped cutterbar profile provides: </p>
       <ul>
        <li>Smooth crop flow</li>
        <li>Superior draper-to-cutterbar seal</li>
        <li>Reduced amount of material under belts</li>
        <li>Minimized crop loss in shatter-prone crops</li>
       </ul>
      </div>

Cutterbar and frame profile gives uninterrupted crop flow

<div>
       
       
       <p>The cam reel design of the 400D Series Draper Platform features:</p>
       <ul>
        <li>165-cm (65-in) diameter</li>
        <li>Heavy-duty plastic or steel fingers</li>
        <li>Tooth position control</li>
        <li>Smoother and quieter operation at higher reel speeds</li>
        <li>Less wear on reel drive components</li>
        <li>Less shattering of the crop</li>
       </ul>
       
       <p>The hourglass-shaped reel has:</p>
       <ul>
        <li>End positioned closer to the cutterbar to provide smooth feeding</li>
        <li>Adjustable bolt position to change distance of reel to cutterbar</li>
       </ul>
       
       <p>The cam position and reel position are adjustable, enabling the machine settings to be matched with the crop conditions for a trouble-free harvest. The finger release position is easily adjustable to one of four cam positions.</p>
       <p> </p>
       <p>The reel is hydraulically positioned up, down, and fore-aft to allow perfect positioning for gentle yet positive feeding action.</p>
       <p> </p>
       <p>Plastic fingers:</p>
       <ul>
        <li>Standard from the factory on all 400D Series Platforms</li>
        <li>Recommended for all crop conditions</li>
        <li>Lighter weight and easy to replace</li>
       </ul>
       <p>Steel fingers:</p>
       <ul>
        <li>Only available through Parts</li>
        <li>Recommended for heavy forage crop</li>
        <li>Longer life</li>
       </ul>
       <p> </p>
       <p>Optional end fingers improve feeding aggressiveness in difficult feeding and cutting conditions with down and tangled crop.</p>
       
       <p>Single span reel:</p>
       <ul>
        <li>Available on 415D, 420D, 425D, 430D and 435D Drapers</li>
        <li>Less weight</li>
        <li>Better center visibility</li>
        <li>Good option for canola and small grains harvesting</li>
       </ul>
       <p>Double span reel:</p>
       <ul>
        <li>Available on 430D, 435D and 440D Drapers</li>
        <li>Better feeding in heavy, wet, or down crop</li>
        <li>Better control of the reel height for more consistent feeding</li>
       </ul>
       
       <p>The reel is available in five-six- or nine-bat configurations:</p>
       <ul>
        <li>Six- to nine-bat conversion is available with field installation
         <ul>
          <li>Recommended for heavy conditions such as silage or grass seed crops</li>
         </ul></li>
       </ul>
      </div>

Strong, positive-feeding reel handles all crop conditions

<div>
       
       
       <p>The cutterbar design provides excellent visibility across the full range of tilt:</p>
       <ul>
        <li>Cutterbar and belt can be easily seen from cab even with optional top-crop conveying auger installed</li>
        <li>Cutterbar can be tilted from cab mechanically or hydraulically depending on windrower option chosen</li>
        <li>Change cutterbar angle with varying crop and field conditions for best cut height and crop flow</li>
       </ul>
      </div>

Excellent visibility to cutterbar and belt

<div>
       
       <p>400D Series Draper Platforms offer optional dual gauge wheels with spring suspension:</p>
       <ul>
        <li>1-cm (15-in.)</li>
        <li>Excellent ground following and flotation in all conditions</li>
        <li>Fine adjust the float on the go from the cab for high-speed harvesting and stable flotation</li>
        <li>Available as part of the integrated slow-speed transport system option</li>
       </ul>
      </div>

Gauge wheels provide ground following for uniform cut

<div>
       
       <p>John Deere 425D, 430D, 435D, and 440D Drapers can windrow out of the center, right, or left ends of the draper with effortless change using the hydraulic deck-shift option.</p>
       
       <p>Hydraulic deck shift option:</p>
       <ul>
        <li>Larger windrows to match combine or self-propelled forage harvester</li>
        <li>Match narrower-width drapers with higher-capacity harvesting</li>
        <li>Place higher-density windrows in front of harvesters when yields are low</li>
        <li>Discharge two windrows side by side for uniform combine or forage harvester feeding</li>
        <li>Move chain stop to change center belt opening quickly and easily for different crop types and density (see operator’s manual for more information)</li>
        <li>Discharge crop to the outside of the headland to prevent running over the windrow while cutting the rest of the field</li>
        <li>Platform stays balanced with automatic fine-float adjustment when using deck shift</li>
        <li>Optional double draper drive bundle is recommended when using deck shift and harvesting silage or wet, heavy crops
         <ul>
          <li><em>NOTE: The double draper drive option is not compatible with the 425D Platform.</em></li>
         </ul></li>
       </ul>
       
       
       
       <p>Optional left- and right-end swath deflector rods form a space between the windrow and uncut crop to have adequate clearance for the crop divider on the next pass.</p>
      </div>

Hydraulic deck shift gives larger windrows for more efficient harvesting

<div>
       
       <p>Sales, parts, and service support from a local John Deere dealer offers overnight parts delivery and a well-trained support staff.</p>
      </div>

John Deere parts and service support provide uptime for a timely harvest

<div>
       
       <p>Slow-speed transport system:</p>
       <ul>
        <li>400D Drapers are towable only with W155 and W170 Self-Propelled Windrowers</li>
        <li>Transport is recommended behind a tractor with seven-pin electrical lighting outlet</li>
        <li>430D, 435D and 440D Drapers only</li>
        <li>Convert draper from field to transport in minutes with one person and without tools</li>
        <li>Dual front dolly wheel tires and two, gauge wheel tires carry weight of transport</li>
       </ul>
       <p> </p>
       <p>It is a simple four-step process to switch from field to transport:</p>
       <ol>
        <li>Move right gauge wheels from field to transport</li>
        <li>Move left gauge wheels from field to transport</li>
        <li>Attach the tongue.</li>
        <li>Detach from the windrower.</li>
       </ol>
      </div>

Transport easily with integrated transport system

<div>
       
       <p>Platform reverser controls are available for the W155 Self-Propelled Windrower only:</p>
       <ul>
        <li>Easily activated from operator's station to clear platform of plugs</li>
        <li>Reverser slowly reverses the knife drive and optional hay conditioner, if equipped, to clear plugs</li>
        <li>Highly recommended when using optional hay conditioner with 400D Platforms</li>
        <li>Operators can run machines closer to their maximum capacity and it will take less time to unplug</li>
       </ul>
       
       <p>The reverser consists of a valve block and valves, shown in the image above. It is the gold-colored valve block on the right side. It is shown plumbed for a 100A Auger Platform.</p>
      </div>