<ul>
<li>Cutterbar and frame profile gives uninterrupted crop flow</li>
<li>Strong, positive-feeding reel handles all crop conditions</li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Gauge wheels provide ground following for uniform cut</li>
</ul>


425D Draper

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Hay and Forage

<ul>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel </li>
<li>Excellent visibility to cutterbar and belt</li>
<li>Provides a uniform cut with ground-following gauge wheels</li>
</ul>


1415D Draper Platforms

435D Draper

<ul>
<li>Structural, tubular frame</li>
<li>Hitch connects quickly and easily</li>
<li>Easy hydraulic operation</li>
</ul>


BU10 Series Bale Unroller

<ul>
<li>Use front hitch for maximum productivity</li>
<li>High-speed rotary disc cutterbar for cutting in tough conditions</li>
<li>Conditioning and swath delivery</li>
<li>Windrowing solutions to match any needs</li>
</ul>


F310R Front Mount Mower-Conditioner

<ul>
<li>Compatible with 7, 8, 9, and 0 Series Balers</li>
<li>Carries 4&#215;6&#8242; bales</li>
<li>Transport width same as baler</li>
<li>Drop 1, 2, or 3 bales at a time</li>
</ul>


Plus2™ A420R Accumulator

<ul>
<li>Full-width feeding pickup</li>
<li>540-rpm PTO power shaft</li>
<li>Deep-flighted auger feeding</li>
<li>Hydraulic bale tension available</li>
</ul>


338 Twine/Wire Baler

<ul>
<li>Small drum cutting</li>
<li>Small drum gathering</li>
<li>Advanced header-height control</li>
<li>Row scrapers and cleaners prevent crop building</li>
</ul>


692 Rotary Harvesting Unit

Hay and Forage Mowing Equipment

<ul>
<li>In 30 minutes or less, you can switch from a rotary head to a 500D Draper head, which means you can harvest small grains and hay with one traction unit.</li>
<li>Quick-change reel teeth can be removed and replaced with minimal effort and tools. Then it’s back to cutting.</li>
<li>Fully integrated controls to the draper means no need for a secondary control box.</li>
</ul>


536D Draper

F350R Front Mount Mower-Conditioner

<ul>
<li>200hp</li>
<li>Integrated AutoTrac™ steering system helps maintain crop quality even at faster cutting speeds</li>
<li>JDLink™ enabled</li>
<li>Optional 24 mph transport speed</li>
</ul>


W200M Windrower

<ul>
<li>Rope System transport latch</li>
<li>Quick-remove shear hub assembly</li>
<li>DM5050 &#038; 5060 iMatch and Quick Coupler compatible</li>
<li>DM5070 Cat. 2 Quick Coupler compatible</li>
</ul>


DM50 Series Disc Mowers

<ul>
<li>Reduce service time with Quick Change Knives</li>
<li>Updated design and styling </li>
<li>Easy serviceability with modular-design cutterbar</li>
<li>Gear-driven cutting platform</li>
<li>Impeller conditioning</li>
</ul>


S250 Mower-Conditioner

<ul>
<li>John Deere-designed rotary cutterbar</li>
<li>Patented diagonally cut module</li>
<li>Hydraulic cutterbar angle adjustment</li>
<li>Adjustable impeller conditioning hood</li>
</ul>


995 Rotary Platform

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Windrowers and Draper Platforms

180A Auger Platform

<ul>
<li>36 ft. (11 m) cut width&nbsp;</li>
<li>Compatible with W200M, W235M, W235R and W260R</li>
<li>Hydraulic tilt John Deere cutter bar</li>
<li>Ground speed matching</li>
<li>Integrated controls</li>
</ul>


D636 Draper

1425D Draper Platforms

<ul>
<li>Greater capacity to process crop with 8-inch deeper belts </li>
<li>Uninterrupted crop flow with C-shaped cutterbar </li>
<li>Handle all crop conditions with strong, positive-feeding reel</li>
<li>Excellent visibility to cutterbar and belt</li>
</ul>


1445D Draper Platforms

View Product Brochure

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p>The C-shaped cutterbar profile provides: </p>
       <ul>
        <li>Smooth crop flow</li>
        <li>Superior draper-to-cutterbar seal</li>
        <li>Reduced amount of material under belts</li>
        <li>Minimized crop loss in shatter-prone crops</li>
       </ul>
      </div>

Cutterbar and frame profile gives uninterrupted crop flow

<div>
       
       
       <p>The cam reel design of the 400D Series Draper Platform features:</p>
       <ul>
        <li>165-cm (65-in) diameter</li>
        <li>Heavy-duty plastic or steel fingers</li>
        <li>Tooth position control</li>
        <li>Smoother and quieter operation at higher reel speeds</li>
        <li>Less wear on reel drive components</li>
        <li>Less shattering of the crop</li>
       </ul>
       
       <p>The hourglass-shaped reel has:</p>
       <ul>
        <li>End positioned closer to the cutterbar to provide smooth feeding</li>
        <li>Adjustable bolt position to change distance of reel to cutterbar</li>
       </ul>
       
       <p>The cam position and reel position are adjustable, enabling the machine settings to be matched with the crop conditions for a trouble-free harvest. The finger release position is easily adjustable to one of four cam positions.</p>
       <p> </p>
       <p>The reel is hydraulically positioned up, down, and fore-aft to allow perfect positioning for gentle yet positive feeding action.</p>
       <p> </p>
       <p>Plastic fingers:</p>
       <ul>
        <li>Standard from the factory on all 400D Series Platforms</li>
        <li>Recommended for all crop conditions</li>
        <li>Lighter weight and easy to replace</li>
       </ul>
       <p>Steel fingers:</p>
       <ul>
        <li>Only available through Parts</li>
        <li>Recommended for heavy forage crop</li>
        <li>Longer life</li>
       </ul>
       <p> </p>
       <p>Optional end fingers improve feeding aggressiveness in difficult feeding and cutting conditions with down and tangled crop.</p>
       
       <p>Single span reel:</p>
       <ul>
        <li>Available on 415D, 420D, 425D, 430D and 435D Drapers</li>
        <li>Less weight</li>
        <li>Better center visibility</li>
        <li>Good option for canola and small grains harvesting</li>
       </ul>
       <p>Double span reel:</p>
       <ul>
        <li>Available on 430D, 435D and 440D Drapers</li>
        <li>Better feeding in heavy, wet, or down crop</li>
        <li>Better control of the reel height for more consistent feeding</li>
       </ul>
       
       <p>The reel is available in five-six- or nine-bat configurations:</p>
       <ul>
        <li>Six- to nine-bat conversion is available with field installation
         <ul>
          <li>Recommended for heavy conditions such as silage or grass seed crops</li>
         </ul></li>
       </ul>
      </div>

Strong, positive-feeding reel handles all crop conditions

<div>
       
       
       <p>The cutterbar design provides excellent visibility across the full range of tilt:</p>
       <ul>
        <li>Cutterbar and belt can be easily seen from cab even with optional top-crop conveying auger installed</li>
        <li>Cutterbar can be tilted from cab mechanically or hydraulically depending on windrower option chosen</li>
        <li>Change cutterbar angle with varying crop and field conditions for best cut height and crop flow</li>
       </ul>
      </div>

Excellent visibility to cutterbar and belt

<div>
       
       <p>400D Series Draper Platforms offer optional dual gauge wheels with spring suspension:</p>
       <ul>
        <li>1-cm (15-in.)</li>
        <li>Excellent ground following and flotation in all conditions</li>
        <li>Fine adjust the float on the go from the cab for high-speed harvesting and stable flotation</li>
        <li>Available as part of the integrated slow-speed transport system option</li>
       </ul>
      </div>

Gauge wheels provide ground following for uniform cut

<div>
       
       <p>John Deere 425D, 430D, 435D, and 440D Drapers can windrow out of the center, right, or left ends of the draper with effortless change using the hydraulic deck-shift option.</p>
       
       <p>Hydraulic deck shift option:</p>
       <ul>
        <li>Larger windrows to match combine or self-propelled forage harvester</li>
        <li>Match narrower-width drapers with higher-capacity harvesting</li>
        <li>Place higher-density windrows in front of harvesters when yields are low</li>
        <li>Discharge two windrows side by side for uniform combine or forage harvester feeding</li>
        <li>Move chain stop to change center belt opening quickly and easily for different crop types and density (see operator’s manual for more information)</li>
        <li>Discharge crop to the outside of the headland to prevent running over the windrow while cutting the rest of the field</li>
        <li>Platform stays balanced with automatic fine-float adjustment when using deck shift</li>
        <li>Optional double draper drive bundle is recommended when using deck shift and harvesting silage or wet, heavy crops
         <ul>
          <li><em>NOTE: The double draper drive option is not compatible with the 425D Platform.</em></li>
         </ul></li>
       </ul>
       
       
       
       <p>Optional left- and right-end swath deflector rods form a space between the windrow and uncut crop to have adequate clearance for the crop divider on the next pass.</p>
      </div>

Hydraulic deck shift gives larger windrows for more efficient harvesting

<div>
       
       <p>Sales, parts, and service support from a local John Deere dealer offers overnight parts delivery and a well-trained support staff.</p>
      </div>

John Deere parts and service support provide uptime for a timely harvest

<div>
       
       <p>Slow-speed transport system:</p>
       <ul>
        <li>400D Drapers are towable only with W155 and W170 Self-Propelled Windrowers</li>
        <li>Transport is recommended behind a tractor with seven-pin electrical lighting outlet</li>
        <li>430D, 435D and 440D Drapers only</li>
        <li>Convert draper from field to transport in minutes with one person and without tools</li>
        <li>Dual front dolly wheel tires and two, gauge wheel tires carry weight of transport</li>
       </ul>
       <p> </p>
       <p>It is a simple four-step process to switch from field to transport:</p>
       <ol>
        <li>Move right gauge wheels from field to transport</li>
        <li>Move left gauge wheels from field to transport</li>
        <li>Attach the tongue.</li>
        <li>Detach from the windrower.</li>
       </ol>
      </div>

Transport easily with integrated transport system

<div>
       
       <p>Platform reverser controls are available for the W155 Self-Propelled Windrower only:</p>
       <ul>
        <li>Easily activated from operator's station to clear platform of plugs</li>
        <li>Reverser slowly reverses the knife drive and optional hay conditioner, if equipped, to clear plugs</li>
        <li>Highly recommended when using optional hay conditioner with 400D Platforms</li>
        <li>Operators can run machines closer to their maximum capacity and it will take less time to unplug</li>
       </ul>
       
       <p>The reverser consists of a valve block and valves, shown in the image above. It is the gold-colored valve block on the right side. It is shown plumbed for a 100A Auger Platform.</p>
      </div>

Specifications
Cutterbar - Type	Dual knife baseSingle knife base optional
Cut width (length)	7.6 m25 ft
Reel type	Pick up cam 4 position adjustable release
Fingers	Heavy-duty plastic
Belt width	Wide rubber skim-coated 710-ml (24-oz) drapers: 1,067 mm41.6 in.
Platform length	8 m26.3 ft
Overall operating depth	With crop dividers 2.6 m8.7 ft
Transport width, field position	8 m26.3 ft
Transport width on wheel, less dividers	2.5 m8.1 ft
Type	Dual knife baseSingle knife base optional
Cut width (length)	7.6 m25 ft
Knife drive	Hydraulic motor to belt to enclosed heavy-duty wobble box
Knife speed	Dual: 700-850 cycles/min1,400-1,700 spmSingle: 600-700 cycles/min1,200-1,500 spm
Cutterbar tilt	Standard hydraulicOptional mechanical (7.5 to 17.0 degree lift)
Reel type	Pick up cam 4 position adjustable release
Number of bats	6 bats standard9 bats optional, single span, capped ends
Fingers	Heavy-duty plastic
Diameter	1,650 mm65 in.
Height control	Hydraulic
Speed control	Hydraulic with header index
Reel lift	Hydraulic
Reel fore and aft	Hydraulic
Operating speeds	0-85 rpm
Belt width	Wide rubber skim-coated 710-ml (24-oz) drapers: 1,067 mm41.6 in.
Operating speed	0-225 m/min0-742 fpm
Speed control	Hydraulic from cab
Header height sensing on the ground	Float springs on traction unit
Header height sensing off the ground	Return to cut height standardGauge wheels optional
Platform length	8 m26.3 ft
Overall operating depth	With crop dividers 2.6 m8.7 ft
Transport width, field position	8 m26.3 ft
Transport width on wheel, less dividers	2.5 m8.1 ft
Approximate weight (base platform with reel)	1,589-1,861 kg3,500-4,100 lb
Center opening width between belts	1,720-1,950 mm67.1-76.7 in.
Deck shift / double windrow capability (manual / hydraulic / not available)	Manual standardHydraulic optional