Engine Manufacturer/model | FX730V |
Engine Power | Gross at 3,600 rpm: 23.5 hp17.5 kW |
Fuel tank capacity | 11.5 U.S. gal.43.5 L |
Mower deck Size | 48, 54, 60 in.122, 137, 152 cm |
Blade tip speed | Approximately 18,000 fpm5,486 m/min |
Transmission | Hydrostatic |
Speed range | 0-10 mph0-16.1 km/h |
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) |
Caster wheels | 13x6.5-6 |
Warranty | 36 months or 1200 hours, whichever comes firstFirst 24 months, no hour limitation |
Manufacturer/Model | FX730V |
Power | Gross at 3,600 rpm: 23.5 hp17.5 kW |
Displacement | 44.3 cu in.726 cc |
Cylinders | Two |
Crankcase capacity | With filter, 2 U.S. qt1.9 L |
Oil filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Air |
Air cleaner | Pre-cleanerYesHeavy-duty canister type with safety element |
Fuel type | Gasoline |
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr4.2-7.2 L/hr |
Fuel tank capacity | 11.5 U.S. gal.43.5 L |
Fuel tank switch/shut-off valve | Yes |
Charge system | 20 amp |
Battery voltage | 12 V |
Cold cranking amp | 300 amp |
Hour meter | Standard, digital |
Operator presence starting system | Brake-N-Go (hand) |
Transmission | Hydrostatic |
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor |
Travel speed | Speed range0-10 mph0-16.1 km/hForward0-10 mph0-16.1 km/hReverse0-4.5 mph0-7.2 km/h |
Speed and direction control | Twin levers |
Hydraulic capacity | 5.9 U.S. qt5.6 L |
Filter | Internal, replaceable |
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) |
Load rating | 4 PR |
Dynamic braking | Twin levers |
Park brake | Internal wet disk integrated in the transmission |
Park brake actuation | Hand brake |
Type | Electro-magnetic, 200 lb-ft271 Nm |
Drive | V-belt |
Size | 48, 54, 60 in.122, 137, 152 cm |
Deck construction | 7-Iron PRO, one-piece stamped steel with reinforcements |
Deck thickness | 7 gauge0.18 in.4.6 mm |
Discharge | Side, Mulch On Demand™ system |
Height-of-cut range | Increments0.25 in.0.64 cm1-5.5 in.2.54-14 cm |
Cutting width | 48, 54, 60 in.122, 137, 152 cm |
Length | Varies by deck size |
Thickness | 0.25 in.0.64 cm |
Blade tip speed | Approximately 18,000 fpm5,486 m/min |
Number | Three |
Caster wheel type | Flat free |
Caster wheels | 13x6.5-6 |
Front anti-scalp rollers | RH, center, LH |
Rear anti-scalp rollers | Optional |
Length | 84 in.213 cm |
Width | With chute down, 62, 68, 74 in.157, 173, 188 cm |
Height | With ROPS up, 73 in.185 cmWith ROPS down, 47 in.119 cm |
Weight | 1,220 to 1,283 lb553 to 582 kg |