<p><strong>Performance Features</strong></p>
<h5> </h5>
<ul style="list-style-type: disc;">
<li>50 Series is available in 6 ft &amp; 7 ft. operating widths.</li>
<li>Tilt, Angle and Offset Adjustments</li>
<li>Reversible Cutting Edge</li>
<li>Standard Parking Stand</li>
<li>Double Strap Hitch (50 Series)</li>
<li>Quick Hitch Compatible</li>
<li>Available in Tractor Colors</li>
</ul>
<p><strong>Construction Features </strong></p>
<ul style="list-style-type: disc;">
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Double Strap Hitch (50 Series)</li>
<li>Reversible Cutting Edge</li>
<li>Powder Coat Paint</li>
</ul>


Rear Mounted Blades 50 Series

Blades

<ul style="list-style-type: disc;">
<li>Quick Hitch Compatible</li>
<li>Heavy-Duty Boxed Frame</li>
<li>Heavy-Duty A Frame</li>
<li>Heat-Treated Reversible and Replaceable Cutting Edges</li>
<li>Double Strap Hitch</li>
<li>Heat-Treated Scarifier Teeth</li>
<li>Heavy Duty End Plates</li>
<li>Powder Coat Paint</li>
</ul>


Roll Over Box Blade

<h5><strong>Performance Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Category I, II Quick Hitch Compatible</li>
<li>9 and 10-feet Operating Widths</li>
<li>1/2-inch x 6-inches Cutting Edge</li>
<li>Up to 180 HP</li>
</ul>
<h5><strong>Construction Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Hydraulic Offset, Angle &amp; Tilt Options</li>
<li>5-inche King Pin</li>
<li>Heavy Duty Skid Shoes &amp; End Plate Options</li>
</ul>


181 Series Rear Mounted Blade

<ul>
<li>Heavy-Duty A Frame with Category 1 Quick Hitch</li>
<li>Heat-Treated Scarifier Teeth</li>
<li>Heavy-Duty Double Strap Hitch</li>
<li>Reversible, Replaceable Cutting Edges</li>
<li>Heavy-Duty End Plates</li>
<li>Strong Tubular Construction</li>
<li>Deep 21 &frac12;&rdquo; Box height</li>
<li>Powder Coat Paint</li>
<li>Available in Major Tractor colors</li>
</ul>


SBX Series Box Blades

<h5>Performance Features </h5>
<ul style="list-style-type: disc;">
<li>48 and 60 inch working widths</li>
<li>12 inch box depth for both models</li>
<li>5/8 inch x 2 1/2 inch scarifier size</li>
<li>4 and 5 scarifier teeth</li>
<li>2 blades with reversible cutting edge for both models</li>
<li>For maximum of 24 PTO tractor HP</li>
<li>Quick hitch compatibility</li>
<li>Lower hitch position for smaller tractors</li>
</ul>
<h5>Construction Features </h5>
<ul style="list-style-type: disc;">
<li>Heavy Duty A Frame</li>
<li>Reversible Cutting Edge</li>
<li>Powder Coat Paint</li>
</ul>


CBX Compact Rear Blades

<h5><strong>Performance Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>160 Series is available in 8 ft &amp; 10 ft. operating widths.</li>
<li>Tilt, Angle and Offset Adjustments</li>
<li>Reversible Cutting Edge</li>
<li>Standard Parking Stand</li>
</ul>
<h5><strong>Construction Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Heavy-Duty King Pins</li>
<li>Powder Coated Paint</li>
<li>Heavy-Duty Mainframe</li>
<li>High-Strength Reinforced Moldboard</li>
</ul>


Rear Mounted Blade 160 Series

<h5>Performance Features </h5>
<ul style="list-style-type: disc;">
<li>Fits Tractors Up To 70 PTO HP</li>
<li>Available In 6 ft. to 8 ft Widths</li>
<li>Tilt, Angle &amp; Offset</li>
<li>Reversible Cutting Edge</li>
<li>High Strength Reinforced Moldboard</li>
<li>Standard Parking Stand</li>
</ul>
<h5>Construction Features </h5>
<ul style="list-style-type: disc;">
<li>Heavy Duty Main Frame</li>
<li>High Strength Reinforced Moldboard</li>
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Double Strap Hitch</li>
<li>Reversible Cutting Edge</li>
<li>Heavy Duty King Pins</li>
<li>Powder Coat Paint</li>
</ul>


Rear Mounted Blade 70 Series

<h5><strong>Performance Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>225 Series is available in 8, 10 and 12-foot operating widths.</li>
<li>Tilt, Angle and Offset Adjustments</li>
<li>Reversible Cutting Edge </li>
<li>Standard Parking Stand</li>
</ul>
<h5><strong>Construction Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Heavy-Duty Mainframe</li>
<li>High-Strength Reinforced Moldboard</li>
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Double Strap Hitch</li>
<li>Powder Coated Paint</li>
<li>Heavy-Duty King Pins</li>
</ul>


Rear Mounted Blades 225 Series

<ul style="list-style-type: disc;">
<li>Heavy Duty A-Frame with Category I &amp; II Quick Hitch</li>
<li>Heat-Treated Scarifier Teeth</li>
<li>Heavy-Duty Triple Lug Hitch</li>
<li>Heat-Treated Reversible Cutting Edges</li>
<li>Floating Tailgate</li>
<li>Heavy-Duty End Plates</li>
<li>Powder Coat Paint</li>
</ul>


Medium Duty Box Blades MBX Series

<h5><strong>Performance Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>300 Series is available in 12 ft. and 14-ft. operating widths.</li>
<li>Tilt, Angle and Offset Adjustments</li>
<li>Reversible Cutting Edge </li>
<li>Standard Parking Stand</li>
</ul>
<h5><strong>Construction Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Heavy-Duty Mainframe</li>
<li>High-Strength Reinforced Moldboard</li>
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Double Strap Hitch</li>
<li>Powder Coated Paint</li>
<li>Heavy-Duty King Pins</li>
</ul>


Rear Mounted Blades 300 Series

<ul style="list-style-type: disc;">
<li>Heavy-Duty A Frame with Category 1 Quick Hitch</li>
<li>Heat-Treated Scarifier Teeth</li>
<li>Heavy-Duty Double Strap Hitch</li>
<li>Reversible, Replaceable Cutting Edges</li>
<li>Heavy-Duty End Plates</li>
<li>Strong Tubular Construction</li>
<li>Deep 22&rdquo; Box height</li>
<li>Powder Coat Paint</li>
<li>Available in Major Tractor colors</li>
</ul>


BBX Series Box Blade

Bush Hog

<p><strong>Performance Features</strong></p>
<ul>
<li>3210 Series comes in a Lift, Pull, Semi-Mount &amp; Offset Model</li>
<li>Rubber Element Cross Shafts</li>
<li>Heavy Duty Cushioned Axles</li>
<li>Two Round Blade Holders</li>
<li>See Specifications Page For Models 3210 &amp; 3210 Offset</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>10-gauge Deck Construction</li>
<li>7-gauge Strongbacks</li>
<li>1/4-inch Sidebands</li>
<li>Rubber Cushioned Axle Arms</li>
<li>5 Year Gearbox Limited Warranty</li>
<li>Powder Coat Paint</li>
</ul>
<p>&nbsp;</p>


3210 Lift Series Multi-Spindle Rotary Cutters

<p><strong>Performance Features</strong></p>
<ul>
<li>Wing skids are 3/8&rdquo; thick for extended wear and outside edges are turned up at 45&deg; to stop heavy ground contact thatmight damage the sidebands.</li>
<li>Center section blades properly align with center wheels to closely cut out the bottom of ditches.</li>
<li>Grease fittings and spring steel bushings at axle pivot points for longer life.</li>
<li>Free wing float without movement of the hydraulic cylinder rod is 22&deg; down and 45&deg; up.</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.</li>
<li>The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.</li>
<li>Bush Hog&rsquo;s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.</li>
</ul>
<p>&nbsp;</p>


3810 Single Flex-Wing Series Rotary Cutters

<h5><strong>Performance Features </strong></h5>
<ul style="list-style-type: disc;">
<li>25&rdquo; Rotor with 2 Knives at 74 lbs.</li>
<li>25gpm recommended flow</li>
<li>20-30gpm flow range</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>4&rdquo; Diameter Capacity (Max. 10&rdquo; Slab)</li>
<li>4&rdquo; x 10&rdquo; Chipper Housing Opening</li>
<li>65&rdquo; Discharge Hood Height</li>
<li>740 lbs. Total Weight</li>
<li>Dimensions (LxWxH) 80&rdquo; x 57&rdquo; x 72&rdquo;</li>
</ul>


XC42S, XC Series Wood Chipper

<ul style="list-style-type: disc;">
<li>All Purpose Plows range in working widths from 44&rdquo; to 80&rdquo;.</li>
<li>Three point lift Cat. 1 Standard or Quick Hitch.</li>
<li>Frame construction is 2-1/2&rdquo; x 2-1/2&rdquo; x 3/8&rdquo; angle iron.</li>
<li>Reversible Plow Points and are made of High Carbon steel</li>
</ul>


All Purpose Plows

<h5><strong>Performance Features </strong></h5>
<ul style="list-style-type: disc;">
<li>25 Ton 36&rdquo; Splitting Length</li>
<li>4.5&rdquo;/36&rdquo; Cylinder Diameter/Stroke</li>
<li>13 GPM Recommended Minimum Hydraulic Flow</li>
<li>Average Cycle 11.43 seconds*</li>
<li>Full Cycle 22.86 seconds*</li>
<li>*depends on flow from tractor/skidsteer</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>Horizontal Splitter Orientation</li>
<li>Dimensions (LxWxH) 90&rdquo; x 36&rdquo; x 22&rdquo;</li>
<li>Weight 680 lbs.</li>
<li>Optional 4 Way Wedge: W4130</li>
</ul>


LS2536S Log Splitter

<p><strong>Performance Features</strong></p>
<ul>
<li>Heavy duty augers equipped with double flighting for more cutting surfaces and faster digging</li>
<li>Special alloy pinion gears and tapered roller bearings on both sides of each gear</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>2400 Series model fits both Cat. 1 and Cat. 2 tractors</li>
<li>Offered in both regular duty and heavy duty augers in sizes from 6-inch to 12-inch</li>
<li>Rugged gearbox construction</li>
<li>Shear pin driveline protection</li>
<li>Options include Hydraulic Down Force Kit, Parking Stand, and Auger Extensions</li>
</ul>
<p>&nbsp;</p>
<p>&nbsp;</p>


PHD2401 Post Hole Digger

<p><strong>Performance Features</strong></p>
<ul>
<li>Bush Hog&reg; Performance in an Economical Pasture Mower</li>
<li>9-feet 9-inches Cutting Width</li>
<li>Rubber cushioned axles gives load protection when working on rough terrain.</li>
<li>Manual or hydraulic lift, single or dual axles on pull models.</li>
<li>High Blade Tip Speeds</li>
<li>Round blade pans are standard equipment.</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>Available In Lift, Pull &amp; Semi-Mount</li>
<li>5 Year Gearbox Limited Warranty</li>
<li>Floating A Frame HItch</li>
<li>Strongbacks are 7 gauge box steel</li>
<li>Drivelines are fully shielded and tough slip clutches standard on all models.</li>
<li>Deep side bands and high blade tip speeds assure better cutting performance.</li>
<li>Round blade pans are standard equipment.</li>
</ul>
<p>&nbsp;</p>


SQ84T Multi-Spindle Rotary Cutters

<p><strong>Performance Features</strong></p>
<ul>
<li>Free Wing Float, without movement of each hydraulic cylinder rod, is 22&deg; down and 45&deg; up.</li>
<li>Each cutting gearbox has the industry&rsquo;s first massive 3-inches output shaft with more splines that are deeper for maximum transmission of torque to the blade pan.</li>
<li>The 2820 is available with Round Blade Carriers or Straight Shredder Blade Bars. The optional Shredder Kit will increase the shredding performance even more that the straight shredder bars.</li>
<li>An optional Material Distribution Baffle Kit spreads cut material to eliminate windrows.</li>
<li>Each wing has a single deck without exposed structure underneath.</li>
<li>The 2820 is available with optional deck rings that reduce the possibility of blade to deck contact.</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>Blade Pans are reinforced for maximum durability.</li>
<li>Spring Axle Cushions are located near each wheel for maximum shock absorption.</li>
<li>Wing Skids are formed upward at 45&deg; to prevent &ldquo;dig in&rdquo; on turns that might damage the sideband.</li>
<li>Grease Fittings and Spring Steel Bushings for minimum wear are at each axle pivot point.</li>
<li>The center section has a doubled deck with no exposed structure for a smooth flow of cut material.</li>
</ul>
<p>&nbsp;</p>


2820 Flex-Wing Rotary Cutter

<h5><strong>Performance Features </strong></h5>
<ul style="list-style-type: disc;">
<li>20 Ton 24&rdquo; Splitting Length</li>
<li>4&rdquo;/24&rdquo; Cylinder Diameter/Stroke</li>
<li>10 GPM Recommended Minimum Hydraulic Flow</li>
<li>Average Cycle 6.62 seconds*</li>
<li>Full Cycle 13.24 seconds*</li>
<li>*depends on flow from tractor/skidsteer</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>Inverse Horizontal Splitter Orientation</li>
<li>Dimensions (LxWxH) 66&rdquo; x 36&rdquo; x 22&rdquo;</li>
<li>Weight 339 lbs.</li>
<li>Optional 4 Way Wedge: W4120</li>
<li>Built-in stripper plates</li>
</ul>


LS2024IS Log Splitter (Inverted)

Landscape

<ul>
<li>Heavy-Duty Gearbox</li>
<li>Slip Clutch is Standard</li>
<li>Adjustable Skid Shoes</li>
<li>Formed Tailgate</li>
<li>Double Strap Hitch</li>
<li>4-inch offset to the right and center mount</li>
<li>Side Gear Drive</li>
<li>Standard slip clutch</li>
</ul>
<p>&nbsp;</p>


Compact Tillers

<ul>
<li>Tubular construction</li>
<li>Twin Bolt Tine Attachment</li>
<li>Heat Treated Tines</li>
<li>Powder Coated Paint</li>
<li>For Tractors Up To 24 HP</li>
</ul>
<p>&nbsp;</p>


Compact Landscape Rakes

<ul style="list-style-type: disc;">
<li>Recommended 15-30 HP</li>
<li>50 Bushel Heaped Capacity (62.5 cu.ft.)</li>
<li>Ground Drive</li>
</ul>


MS500G Ground Driven Manure Spreader

<p><strong>Performance Features</strong></p>
<ul>
<li>48 and 60 inch working widths</li>
<li>12 inch box depth for both models</li>
<li>5/8 inch x 2 1/2 inch scarifier size</li>
<li>4 and 5 scarifier teeth</li>
<li>2 blades with reversible cutting edge for both models</li>
<li>For maximum of 24 PTO tractor HP</li>
<li>Quick hitch compatibility</li>
<li>Lower hitch position for smaller tractors</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>Heavy Duty A Frame</li>
<li>Reversible Cutting Edge</li>
<li>Powder Coat Paint</li>
</ul>
<p>&nbsp;</p>


Compact Box Blades

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

Snow Removal Equipment

<p><strong>Performance Features </strong></p>
<ul style="list-style-type: disc;">
<li>Available in 4, 5, 6 and 7 ft. operating widths.</li>
<li>Quick Hitch Compatible</li>
<li>Reversible Cutting Edge</li>
<li>Angle &amp; Tilt Adjustment</li>
<li>Fits Tractors Up To 35 PTO HP</li>
</ul>
<h5><strong>Construction Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Reversible Cutting Edge</li>
<li>Powder Coat Paint</li>
</ul>


Rear Mounted Blades 35 Series

<h5><strong>Performance Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>100 Series is available in 8 ft. &amp; 9 ft. operating widths.</li>
<li>Manual or Hydraulic Tilt, Angle and Offset Adjustments</li>
<li>Reversible Cutting Edge</li>
<li>Standard Parking Stand</li>
</ul>
<h5><strong>Construction Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Heavy-Duty Mainframe</li>
<li>High-Strength Reinforced Moldboard</li>
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Powder Coat Paint</li>
<li>Heavy-Duty King Pins</li>
</ul>


100 Series Rear Mounted Blades

<h5><strong>Performance Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>91 Series is available in 7 ft. &amp; 8 ft. operating widths.</li>
<li>Tilt, Angle and Offset Adjustments</li>
<li>Reversible Cutting Edge</li>
<li>Standard Parking Stand</li>
</ul>
<h5><strong>Construction Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Heavy-Duty Mainframe</li>
<li>High-Strength Reinforced Moldboard</li>
<li>Tubular Construction</li>
<li>A Frame Construction</li>
<li>Powder Coat Paint</li>
<li>Heavy-Duty King Pins</li>
</ul>


Rear Mounted Blade 91 Series

<h5>Performance Features </h5>
<ul style="list-style-type: disc;">
<li>Category I, II Quick Hitch Compatible</li>
<li>7, 8, and 10-feet Operating Widths</li>
<li>1/2-inch x 6-inches Cutting Edge</li>
<li>4-inches King Pin</li>
<li>Up to 141 HP</li>
</ul>
<h5>Construction Features </h5>
<ul style="list-style-type: disc;">
<li>Hydraulic Offset, Angle &amp; Tilt Options</li>
<li>4-inches King Pin</li>
<li>Heavy Duty Skid Shoes &amp; End Plate Options</li>
</ul>
