<ul>
<li>Consistent seeding rates from row to row with RelativeFlow™ blockage monitoring</li>
<li>Get in the field sooner with standard high-flotation package</li>
<li>3 Section &#8211; 40 Ft. &#8211; 12 In. Spacing</li>
</ul>

P540 Air Hoe Drill

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>

616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>

WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>

DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>

HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>

AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>

FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>

600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>

2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>

1100A Auger Platform

<ul>
<li>DigidriveTM drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>

TD13 Series Hay Tedder

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm3 (13 cu. in.) / 180 cm3 (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>

1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>

1010G Forwarder

Seeding Equipment

<ul>
<li>Quick Change Blade enhancement of the ProSeries™ Opener reduces change time by up to 45%1</li>
<li>Electric drive with Section Control </li>
<li>Wide variety of working widths and row spacings </li>
<li>Premium Lighting and easier access to meters </li>
</ul>

N530C Air Drill Central Commodity System (CCS™)

<ul>
<li>70 ft. working width at 10-in. or 12-in. spacing</li>
<li>Dual Knife Openers</li>
<li>Relative Flow™ blockage monitoring</li>
<li>Uniform seed and fertilizer placement with a consistent 0.75-in. vertical and 1.5-in. horizontal spread.</li>
</ul>

P670 Precision Air Hoe Drill

<ul>
<li>Choice of auger or conveyor</li>
<li>Stationary single-shoot manifold</li>
<li>In-line drive system transfers power efficiently</li>
<li>550-bushel grain tank capacity on tow-behind models</li>
</ul>

1910 Tow-Between Air Commodity Cart

<ul>
<li>Adjust down pressure with TruSet™ In-Cab downforce</li>
<li>See the flow of seed &amp; fertilizer from the cab with RelativeFlow™ blockage monitoring</li>
<li>Quick Change Blade enhancement of the ProSeries™ Opener reduces change time by up to 45%1</li>
<li>Convenient dual-row spacing hydraulics </li>
</ul>

N536 No-Till Air Drill

<ul>
<li>Accurate seed metering capability</li>
<li>Wide variety of working widths and row spacings</li>
<li>Ground drive system with dual-range sprocket</li>
<li>Durable mainframe and wings</li>
</ul>

1990 Central Commodity System (CCS™)

<ul>
<li>Adjust down pressure with TruSet™ In-Cab downforce</li>
<li>See the flow of seed &amp; fertilizer from the cab with RelativeFlow™ blockage monitorin</li>
<li>Quick Change Blade enhancement of the ProSeries™ Opener reduces change time by 45%1</li>
<li>Accurate seed placement &amp; emergence with TruSet™ in-cab &#8220;closed loop&#8221; downforce pressure contr</li>
</ul>

N540F Separate Fertilizer Placement (SFP) Air Drill

<ul>
<li>Tow-behind</li>
<li>650-bushel (22.9-cu m) capacity</li>
<li>Fill all four tanks as quickly as 20 minutes*</li>
<li>Calibrate rate in half the time</li>
</ul>
*Fill time compared to 1910 550 TBH based on Internal John Deere testing.

C650 Air Cart

<ul>
<li>See the flow of seed &amp; fertilizer from the cab with RelativeFlow™ blockage monitoring</li>
<li>Positive depth control features and options</li>
<li>Choice of ground-engaging openers</li>
<li>Longer machine life with flexible frame</li>
</ul>

H541 Air Hoe Drill

<ul>
<li>Floating hitch on 1890 No-Till Air Drill</li>
<li>Parallel Tracking&#8482; or AutoTrac&#8482; compatibility</li>
<li>Convenient dual-row spacing hydraulics</li>
<li>Optional air seeder row markers</li>
</ul>

1890 No-Till Air Drill

<ul>
<li>Consistent seeding rates from row to row with RelativeFlow™ blockage monitoring</li>
<li>Get in the field sooner with standard high-flotation package</li>
<li>5 Section &#8211; 56 Ft. &#8211; 12 In. Spacing</li>
</ul>

P556 Air Hoe Drill

View Product Brochure

Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment

BALR: Farm Equipment

<div>
 
 With RelativeFlow Blockage sensing, operators can see the flow of both seed and fertilizer from inside the tractor cab. Sensors on all secondary hoses monitor the relative product flow row to row, giving you a better view of the flow rate of both seed and fertilizer from the cart to the opener from inside your tractor cab. This technology can help you identify any problems before a potential blockage occurs.
  
 RelativeFlow Blockage is available in all run configurations on the following models (all widths):  
 <ul>
 <li>H500</li>
 <li>H500F</li>
 <li>P500</li>
 <li>P600</li>
 <li>N500</li>
 <li>N500F</li>
 <li>N500C</li>
 <li>730LL</li>
 </ul>
  
 RelativeFlow Blockage is compatible with hydraulic drive carts: model year 2014 and newer 1910, all 19,381.5-L (550-bu) 1910 Carts, and C650 and C850 Air Carts.
  
 Below are the Gen 4 display screens for the blockage monitoring system. For complete details and information, see the owner’s manual.
 
 The RelativeFlow Blockage sensing chart shows the amount of flow through each sensor on the selected tower. Sensitivity for the blockage system can be adjusted if desired, as shown below.
 
 Blockage warning sensitivity allows the producer to set and change the sensitivity of the sensors to meet their preferences and varying crop/fertilizer types. Increasing the sensitivity means the system is more likely to show a false blockage, while less sensitivity means the system is more likely to miss a blockage.
  
 Multiple run-page alarm behavior options are available for selection.
 
 Below are the Gen 4 display screens for the blockage monitoring system on the N500C.
  
 For complete details and information reference, the owner’s manual.
 
 The SeedStar™ system run page displays the five major run settings. Clicking on any of the tiles will take an operator to that specific page (shown below).
 
 
 Blockage alarm delays can be set up by clicking on the advanced settings button from the blockage set-up screen.
 <ul>
 <li>A blockage delay is how long a blockage should occur before an alarm is sounded.</li>
 <li>The blockage alarm reminder is how often the alarm should sound when a blockage occurs.</li>
 <li>The meter on delay is the time from when the meter is turned on until the blockage sensor should start monitoring for blockage.</li>
 <li>The meter off delay is the time from when the meter is turned off until the blockage sensor should start monitoring to verify no flow.</li>
 </ul>
 For more detailed information, see the owner’s manual.
  
 Air tools with RelativeFlow Blockage are not compatible with 1910 air carts with ground drive.
  
 </div>

Confidence in rates from row to row with RelativeFlow™ Blockage sensing

<div>
 
 Whether using dry, liquid, or anhydrous ammonia, the John Deere P500 opener has the options that fit the application needs.
 
 <table class="table table-bordered table-striped">
 <tbody>
 <tr>
 <td> </td>
 <td> </td>
 <td> </td>
 <td> </td>
 <td> </td>
 <td> </td>
 </tr>
 <tr>
 <td> </td>
 <td>AA74478 Aqua anhydrous point</td>
 <td>AA69276NH3 point</td>
 <td>AA74476Liquid fertilizer point</td>
 <td>AA69277Dry fertilizer point</td>
 <td>AA86117Mud special point</td>
 </tr>
 <tr>
 <td>Description</td>
 <td colspan="5">Austempered 10B38 boron steel point with hard-faced areas and induction fused carbide inserts to prevent wear. Carbide plates are 4-mm (0.16-in.) thick along the point edge and 6-mm (0.24-in.) thick on the tip.</td>
 </tr>
 <tr>
 <td>Application</td>
 <td>Aqua anhydrous</td>
 <td>Anhydrous</td>
 <td>Liquid fertilizer</td>
 <td>Dry fertilizer**</td>
 <td>Dry fertilizer</td>
 </tr>
 <tr>
 <td>Option code</td>
 <td>1255</td>
 <td>1250</td>
 <td>1215/1220</td>
 <td>---</td>
 <td>1235</td>
 </tr>
 <tr>
 <td>Tube diameter (OD)</td>
 <td>9.5 mm (3/8 in.)</td>
 <td>12.7 mm (1/2 in.)</td>
 <td>6.35 mm (1/4 in.)</td>
 <td>---</td>
 <td>---</td>
 </tr>
 <tr>
 <td>Pin on</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 </tr>
 <tr>
 <td>High top</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 </tr>
 <tr>
 <td>Suitable for dry conditions</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 <td>X</td>
 </tr>
 <tr>
 <td>Suitable for muddy conditions</td>
 <td>X*</td>
 <td>X*</td>
 <td>X*</td>
 <td>---</td>
 <td>X</td>
 </tr>
 <tr>
 <td>Dry fertilizer tube add-on</td>
 <td>AA69271</td>
 <td>AA69271</td>
 <td>AA69271</td>
 <td>AA69266</td>
 <td>---</td>
 </tr>
 <tr>
 <td>Weight</td>
 <td>0.9 kg (2 lb)</td>
 <td>0.97 kg (2.14 lb)</td>
 <td>0.88 kg (1.95 lb)</td>
 <td>0.86 kg (1.9 lb)</td>
 <td>1.7 kg (3.78 lb)</td>
 </tr>
 <tr>
 <td>Other information</td>
 <td>This form of ammonia is produced by dissolving ammonia gas in water. AA69272 hose guide is required if dry fertilizer tube is not installed.</td>
 <td>Anhydrous ammonia is compressed into a clear, colorless liquid. AA69272 hose guide is required if dry fertilizer tube is not installed.</td>
 <td>AA69272 hose guide is required if dry fertilizer tube is not installed.</td>
 <td>---</td>
 <td>Replaces AA69279. Wear-resistant, hard-faced welds increased by 75 percent. Thickness increase from 4 to 8 mm (0.16 to 0.3 in.). Extra 12.7-mm (1/2-in.) weld added close to heavy wear area.</td>
 </tr>
 <tr>
 <td colspan="6">*If not using dry fertilizer tube add-on**Dry tube required</td>
 </tr>
 </tbody>
 </table>
  
 
 This picture shows the difference between the anhydrous high top and aqua anhydrous tips pictured in the chart above. On the left, the anhydrous high top has a thicker tube wall (1.3-cm [0.5-in.] outer diameter) than the aqua anhydrous tip, though the inner diameter of both tips are equal. The NH3 knives may also be used in combination with the included dry-delivery tube for those wanting to apply NH3 and dry fertilizers simultaneously in the same fertilizer trench.
  
 Additional information for code 1235: the mud-proof combination of dry-fertilizer tube and tip, code 1235, is available for those applying dry fertilizers only. This is recommended for running in sticky, heavy clay-type soils. However, it works well in all soil types to prevent mud from plugging the fertilizer tube opening. This opener is included as base equipment.
  
 If seeding with dry fertilizer only, this option is highly recommended. The fertilizer exits the tube at a lower point, allowing growers desiring to place fertilizer at shallower depths more consistently.
  
 The lower fertilizer exit point also allows the fertilizer to get to the bottom of the trench when more fertilizer and seed separation is desired, and for those light soils that tend to cave in the trench before the fertilizer is placed.
 
 <table class="table table-striped table-bordered">
 <tbody>
 <tr>
 <td colspan="2">Fertilizer tubes</td>
 </tr>
 <tr>
 <td>1.) AA69266 (1250) - Dry fertilizer</td>
 <td></td>
 </tr>
 <tr>
 <td>2.) AA69271 (1220/50/55) - Dry fertilizer with NH3 or liquid</td>
 <td></td>
 </tr>
 <tr>
 <td>3.) AA69272 (1215) - Liquid tube</td>
 <td></td>
 </tr>
 </tbody>
 </table>
  
 </div>

Variety of fertilizer placement

<div>
 <h5>Paired row vs. side banded</h5>
 
 The P500 has two cast seed boots available. Depending on a grower’s seed and fertilizer placement preference in different soils or different crops, the P500 can meet the user’s needs. The cast opener was designed with simplicity in mind. One tube is all that is necessary. Switching from single to paired row has never been easier; simply remove the two bolts holding the cast opener in place, remove the opener, and replace with the new opener.
  
 Paired row
 With shanks on 30.5-cm (12-in.) spacing, paired rows can be planted with 22.9-cm (9-in.) spacing. Seed is banded in two rows above and to the sides of the furrow. Total tillage in this zone is 7.6-cm (3-in.) wide with about 25 percent seedbed utilization (SBU).
  
 Seed is laid on a 2-cm (0.75-in.) shelf while fertilizer is placed in a 2.5-cm (1-in.) band between and below the two seed rows.
  
 With paired row placement, the crop is able to access the fertilizer when it needs it. The separation is enough to safely keep the seed from burning. The P500 provides a well-prepared seedbed for quick emergence and quicker canopy, which will help eliminate weeds. If the operator is looking to swath wider rows, support the heavy green crop. 
 
 
 Side banded
 If the seeding operation calls for side banding, the P500 is the needed tool. The side-banding seed tube places the seed on a firm bed of soil above and to the side of fertilizer as required. There are 30.5-cm (12-in.) rows across the machine with positive separation between seed and fertilizer up to 11.4 cm (4.5 in.). As the seed germinates and begins to emerge, its roots will be 7.6-cm to 10.2-cm (3-in. to 4-in.) deep and into the nutrient zone.
  
 John Deere recognizes not all seeding conditions are identical and, with the P500, offers solutions to meet seed and fertilizer placement needs.
 
 
 </div>