<div>
<ul>
<li>On-the-go measuring of moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar</li>
<li>Automatically adjust inoculant dosage based on current dry matter level</li>
<li>Automatically adjust length-of-cut, on the go</li>
<li>The HarvestLab 3000 equipped with a turn table ensure a more frequent and more accurate evaluation of the ensiled material before rations are mixed.</li>
<li>Utilize your HarvestLab 3000 all year long with the dual use capabilities of the Sensor for forage harvest and bunk management with the stationary turn table.</li>
</ul>
</div>


John Deere HarvestLab™ 3000 HarvestLab™ and Constituent Sensing

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Data Management

<div>
<ul>
<li>View on-the-go harvest information for potatoes, onions, sugar beets, and other specialty crops.</li>
<li>Transfer your data into John Deere Operations Center to make better decisions.</li>
</ul>
</div>


Yield Documentation Specialty Crops

<div>
<ul>
<li>Easily transfer data from your in-cab display to your John Deere Operations Center account</li>
<li>Reduce the risk of data loss</li>
<li>Consolidates data from different display brands into one place.</li>
</ul>
</div>


My Transfer™ Mobile App

<div>
<ul>
<li>Monitor the performance of your combine, planter, or sprayer.</li>
<li>Understand what adjustments can improve the job performance.</li>
<li>View detailed machine information to maximize results from the work you do to make better decisions in the future.</li>
</ul>
</div>


Connect Mobile

<div>
<ul>
<li>See coverage and as-applied maps for machines working in the same field at the same time.</li>
<li>Ensure complete field coverage with multiple machines even in low light and/or dusty conditions.</li>
<li>Reduce over-application leading to more accurate documentation data and lower input costs.</li>
</ul>
</div>
<p></p>


In-Field Data Sharing

<div>
<ul>
<li>Eliminates manual tagging of modules</li>
<li>Provides module tracking, tracing, and delivery to the gin</li>
<li>Document cotton harvest on-the-go</li>
</ul>
</div>


Harvest Identification, Cotton Pro

<ul>
<li>Measure liquid manure nutrient levels in real time using the HarvestLab™ 3000 sensor</li>
<li>Precisely apply nutrients at targeted or limited levels with automated speed control</li>
<li>Document liquid manure nutrient application to better control total crop nutrient costs</li>
<li>Use nutrient application data layers in John Deere Operations Center to make better decisions</li>
<li>Easily install the system on your current tanker or drag line applicator</li>
</ul>


Manure Constituent Sensing

<ul>
<li>4G JDLink MTG (modem) connects your machines for fast data transfer.</li>
<li>Stream machine and field data to your John Deere Operations Center account.</li>
<li>Enable machine-to-machine communication and remote support from your dealer.</li>
</ul>


JDLink™ Connectivity JDLink™ Connectivity

<ul>
<li>See what’s happening in your operation right now, and learn from your performance over time.</li>
<li>Collaborate with the right people and tools to make decisions that save time, optimize yield, and maximize profits.</li>
<li>Direct your operations by turning your plans into action, and adjusting as conditions change.</li>
</ul>


Operations Center

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Precision Ag Technology

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Use a Dealer-owned RTK network to reduce your administrative expenses</li>
<li>Provides less chance of radio interference, and RTK Extend to minimize shading signal loss</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation</li>
<li>Requires RTK subscription provided by your John Deere dealer or your own base station</li>
</ul>


Radio RTK 900

<div>
<ul>
<li>Accurate placement of inputs</li>
<li>Increases productivity by increased AutoTrac usage in subsequent cropping passes.</li>
<li>Decrease crop damage in subsequent cropping practices</li>
<li>Higher accuracy of placement of inputs improving crop potential.</li>
</ul>
</div>
<div></div>


Active Implement Guidance

<ul>
<li>An affordable and portable way to put precision ag to work for you</li>
<li>8.4-inch touchscreen provides easy-to-use experience</li>
<li>High-contrast screen allows you to see your display in bright sunlight, even on open station tractors</li>
<li>Basic documentation and AutoTrac come standard</li>
</ul>


4240 Universal Display

<div>
<ul>
<li>Automate scraper adjustments to form land based upon water management software recommendations</li>
<li>Take advantage of plane control, grade control, and cross-slope compensation to achieve desired land forming results</li>
<li>Utilize horizontal RTK level accuracy without the need for additional laser guidance corrections</li>
</ul>
</div>


iGrade™

<ul>
<li>Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year</li>
<li>Allows you to use RTK precision in difficult areas such as hilly terrain because there is no line-of-sight requirement to the base station.</li>
<li>No need to manually switch base stations as you move between fields — you can roam anywhere within the network and have access to the RTK correction signal.</li>
<li>Requires a StarFire 6000 receiver, SF3 Ready Activation, RTK Ready Activation</li>
<li>Requires John Deere Mobile RTK subscription</li>
</ul>


RTK Mobile Correction Signal

<div>
<ul>
<li>Improve asset utilization by electronically assigning work orders to application equipment.</li>
<li>Make better scheduling decisions by seeing the entire equipment fleet on a single map.</li>
<li>Use advanced reporting to analyze machine and operator performance.</li>
</ul>
</div>


AgLogic™

<div>
<ul>
<li>Reduce the cost of having to purchase multiple rate controllers by controlling both liquid and dry products simultaneously with a single controller.</li>
<li>Provides a common rate controller and user interface across multiple machine and implement types including multi-tank air carts, direct injection systems, and dual-boom and tiered-boom systems.</li>
</ul>
</div>
<div></div>


John Deere Rate Controller 2000

Technology Products

<div>
       
       <p>The HarvestLab™ 3000 sensor can be used for two different applications:</p>
       <ul>
        <li>HarvestLab 3000 and John Deere Constituent Sensing on a John Deere self-propelled forage harvester</li>
       </ul>
       
       <p>The HarvestLab 3000 sensor enables an accurate measurement and documentation of dry matter, starch, protein, neutral detergent fiber, and acid detergent fiber in different crop types. For better fertilization planning in the next season, operators can use the HarvestLab 3000 sensor to determine and document the nutrient values taken off the field during harvest. It also helps achieve higher quality forage by enabling automatic length-of-cut adjustments on the go to ensure an optimal bunker compaction and conservation. In addition, the smart use of additives ultimately leads to higher milk yields and more efficient use of feed.</p>
       <ul>
        <ul>
         <li>Measure yield while harvesting</li>
         <li>Accurately determine moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar on-the-go</li>
         <li>Better determine the value of forage when purchasing for biogas operations</li>
         <li>Dose inoculants based on current dry-matter level</li>
         <li>Automatically adjust length of cut on the go </li>
        </ul>
        <li>Stationary application by adding a stationary kit to the HarvestLab 3000 and connecting it to a computer</li>
       </ul>
       
       <p>The HarvestLab 3000 sensor and stationary kit can provide time and cost savings with use in the barn, field office, or anywhere feed analysis is needed. For example, the components of a total mix ratio (TMR) can be measured every day to ensure the correct mix ration and achieve the maximum milk yield.</p>
       <ul>
        <ul>
         <li>Monitor silage quality all year round</li>
         <li>Support daily feed ration calculation</li>
         <li>Determine moisture, dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar within 2 minutes</li>
        </ul>
       </ul>
       <p>Measured data can also be downloaded from the HarvestLab 3000 sensor and saved to a computer for record-keeping purposes or to share with a nutritionist.</p>
      </div>

One sensor, two applications

<div>
       
       <p>Developed and patented with Carl-Zeiss, the HarvestLab™ 3000 sensor simultaneously measures the dry matter and various constituents of harvested crops. The HarvestLab 3000 uses the same near-infrared-reflectance (NIR) technology entrusted and used by most nutrition labs, but produces results instantly and with over 4000 readings per second. This provides producers with not simply one random sample value but statistically solid data on the go.</p>
      </div>

Real-time ingredient measurements on-the-go

<div>
       
       <p>HarvestLab™ 3000 sensor provides on-the-go yield, moisture and constituents data when used in conjunction with the Harvest Monitor™ system. This instantaneous information can then be recorded and documented by using the Harvest Doc™ mapping system and a StarFire™ 6000 Receiver.</p>
       <p> </p>
       <p>Each operation is unique, but in general, silage harvested in a matter of days is expected to feed herds the entire year or be sold throughout the year.</p>
       <p> </p>
       <p>Considering harvest conditions are never perfect and feed quality never improves after harvest or during storage, effective management and the ability to react quickly and efficiently becomes paramount.</p>
       <p> </p>
       <p>The HarvestLab 3000 sensor allows producers to make informed management decisions at harvest and during storage in order to maximize silage and feed quality from the day it is harvested to the day it is fed or sold.</p>
       <p> </p>
       <p>Much value stems from obtaining instantaneous yield, moisture, and constituent data. Producers can do the following:</p>
       <ul>
        <li>Quickly identify if the crop has reached the optimal moisture to harvest</li>
        <li>Prevent downtime while waiting for the moisture measurements via drying ovens</li>
        <li>Automatically adjust the length-of-cut and inoculant levels to the optimal level</li>
        <li>Optimize the bunk density and fermentation for heightened silage and feed quality</li>
        <li>Segment the storage facilities based on the moisture or constituent content</li>
        <li>Compare hybrid/variety productivity</li>
        <li>Acquire dry volumes</li>
        <li>Enhance invoicing and documentation</li>
       </ul>
       <h5>Constituent types</h5>
       
       <table class="table table-striped table-bordered">
        <tbody>
         <tr>
          <td><strong>   </strong></td>
          <td colspan="2"><strong>Crop type</strong></td>
          <td><strong>Moisture</strong></td>
          <td><strong>Crude protein (XP)</strong></td>
          <td><strong>Sugar</strong></td>
          <td><strong>Starch</strong></td>
          <td><strong>Acid detergent fiber (ADF)</strong></td>
          <td><strong>Neutral detergent fiber (NDF)</strong></td>
          <td><strong>Ash</strong></td>
         </tr>
         <tr>
          <td rowspan="6"><strong>Forage bundle</strong></td>
          <td rowspan="2"><strong>Corn</strong></td>
          <td><strong>Fresh</strong></td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
         </tr>
         <tr>
          <td><strong>Ensiled</strong></td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
         </tr>
         <tr>
          <td rowspan="2"><strong>Haylage</strong></td>
          <td><strong>Fresh</strong></td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>/</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
         </tr>
         <tr>
          <td><strong>Ensiled</strong></td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>/</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
         </tr>
         <tr>
          <td rowspan="2"><strong>Whole crop silage</strong></td>
          <td><strong>Fresh</strong></td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
         </tr>
         <tr>
          <td><strong>Ensiled</strong></td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
          <td>X</td>
         </tr>
        </tbody>
       </table>
       <p> </p>
       <p>For further information regarding the constituents, see <a href="http://element-si-staging.azurewebsites.net/sales/salesmanual/en_NA/ams/2022/model/constituent_sensing.html">John Deere Constituent Sensing</a> in the Sales Manual.</p>
      </div>

Automated site specific documentation

<div>
       
       
       <p>Easily connect the HarvestLab 3000 sensor with the HarvestLab 3000 stationary kit. The sensor can be removed from a forage harvester or manure tanker in a matter of minutes. The stationary kit offers a practical and easy-to-use solution to measure forage quality away from the John Deere self-propelled forage harvester.</p>
       <ul>
        <li>Monitor silage quality all year round</li>
        <li>Better determine the value of forage when purchasing for biogas operations</li>
        <li>Support daily feed ration calculation</li>
        <li>Determine dry matter, protein, starch, fiber, neutral detergent fiber, acid detergent fiber, and sugar within 2 minutes</li>
        <li>Supply power with 12-V cigarette lighter adapter for mobile use</li>
       </ul>
       <p>Operate the stationary application using the intuitive web-user interface, including improved measurements procedure with detailed step-by-step explanations. Store measurements or export them in the CSV format.</p>
      </div>

Improved web user interface for stationary application

<div>
       
       <ol>
        <li>HarvestLab 3000</li>
        <li>Manual control (operator)</li>
        <li>AutoLoc — automatic length-of-cut control</li>
        <li>Infinitely variable length of cut (IVLOC™) — length-of-cut changes on-the-go</li>
       </ol>
       
       <p>Save up to 5 percent fuel while increasing throughput leveraging AutoLoc.</p>
       <p> </p>
       <p>AutoLoc, a feature exclusive to John Deere, brings added value to the HarvestLab moisture sensor and John Deere self-propelled forage harvester (SPFH). AutoLoc works in conjunction with the HarvestLab 3000 sensor and IVLOC to automatically adjust the length of cut based on crop-moisture levels to improve bunk density. Nutritionists, herdsmen, and SPFH operators will all benefit from this innovation.</p>
       <p> </p>
       <p>John Deere is leading the industry in providing real-time information that matters most to forage production. Quality forage comes from properly packed silage, which is directly related to the moisture content and length of cut of the crop.</p>
       <p> </p>
       <p>Length-of-cut changes are made automatically in the field based on moisture readings and predetermined settings determined by operator requirements. No in-field calibration is required to load the length-of-cut (LOC) requirements; the operator simply uses the GreenStar™ display to program the desired LOC settings at different moisture levels.</p>
       <p> </p>
       <p>When moisture levels of crop in the field change, the hydrostatic IVLOC feedroll drive automatically responds to either an increase or decrease the feedroll speed, which in turn changes the LOC. If moisture levels of the crop are outside of the desired range, IVLOC adjusts and limits the LOC, based on the maximum and minimum LOC settings, as determined by the operator.</p>
       
      </div>