<ul>
<li>Larger, more durable gearboxes</li>
<li>Large-diameter, round-pan blade holders</li>
<li>Tractor hookup available</li>
<li>Max Flow cutting chamber for a clean cut</li>
</ul>


HX10 HX10 Rotary Cutter

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Cutters and Shredders

<ul>
<li>20 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>Hammer blade option</li>
</ul>


R20 Flex Wing Rotary Cutter

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>New frontal suspension and swivel hitch options</li>
</ul>


R15 Flex Wing Rotary Cutter

<ul>
<li>Adjustable cutting height</li>
<li>Uses a heavy-duty gearbox with a rating of 65 hp</li>
<li>Compatible with any Category 1 3-point hitch</li>
</ul>


25A Flail Mower

<ul>
<li>Easy-to-maneuver</li>
<li>Adjustable cutting height</li>
<li>Balanced blade pan</li>
<li>Puncture-resistant rear tires&nbsp;</li>
</ul>


RC20 Series Rotary Cutters

<ul>
<li>10 ft. cutting width</li>
<li>540 PTO RPM</li>
<li>4-inch cutting capacity with optional high impact blades for 5-inch cutting capacity</li>
<li>Rear wheel torsional suspension</li>
</ul>


FC10R Flex Wing Rotary Cutter

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>50-plus HP tractor PTO compatibility</li>
<li>Laminated or pneumatic 4-bolt tires</li>
</ul>


FC15E Flex Wing Rotary Cutter

<ul>
<li>Standard safety chain shields</li>
<li>Standard stump jumper blade holder</li>
<li>3-point hitch quick-coupler (Category 2)</li>
<li>Industry-exclusive Double-Decker™ frame design</li>
</ul>


MX8 MX8 Rotary Cutter

<ul>
<li>Eight-gauge reinforced steel deck</li>
<li>Cutting height from 2.5 cm to 12.7 cm (1 in. to 5 in.)</li>
<li>Quick-detach chain shield assembly</li>
<li>iMatch™&nbsp;quick-hitch compatible</li>
</ul>


FM10 Series Flex-Wing Grooming Mower

<ul>
<li>Gearcases and blade holders provide better performance</li>
<li>Deep-cutting chamber provides a better shredding action</li>
<li>Front and rear safety chains are standard for increased protection</li>
</ul>


HX6 Rotary Cutter

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Landscaping and Grounds Care

<ul>
<li>Large, easy-access step and hand brace</li>
<li>Upgraded valve provides smooth hydraulics for precise control</li>
<li>Available field-install thumb option</li>
<li>Stabilizer, boom and swing locks accessible from the operator’s seat</li>
</ul>


260B Backhoe

<ul>
<li>Net Power:  116&nbsp;kW (155&nbsp;hp) at 1,400&nbsp;rpm</li>
<li>Operating Weight:  18&nbsp;422&nbsp;kg&nbsp;(40,614&nbsp;lb.)</li>
<li>Heaped Capacity: 1.9 m<sup>3</sup> (2.4&nbsp;cu.&nbsp;yd.)</li>
<li>Breakout Force: 148&nbsp;kN (33,271&nbsp;lbf)</li>
</ul>


655K Crawler Loader

<ul>
<li>Net Power: 311 kW (417 hp) at 1,600 rpm</li>
<li>Bucket Capacity: 4.8–6.1 m3 (6.3–8.0 cu. yd.)</li>
<li>Operating Weight: 33,943– 34,777 kg (74,831–76,670 lb.)</li>
</ul>


844L Wheel Loader

<ul>
<li>Premium HVAC cab with light-stone interior</li>
<li>Cargo box power lift</li>
<li>LED headlights</li>
<li>Up to 4,000-lb towing capacity</li>
</ul>


XUV835R Premium Cab Crossover Utility Vehicle

<ul>
<li>Powerful diesel engine and ultimate HVAC cab with genuine leather seats</li>
<li>7-speaker infotainment system with touchscreen</li>
<li>Rear-facing camera and sliding rear window</li>
<li>Versatile Bumper Pro Brush Guard</li>
</ul>


XUV865R Signature Edition Crossover Utility Vehicle

Rotary Cutters

<ul>
<li>Standard stump jumper blade holder</li>
<li>Domed shape top deck is smooth and easy to clean</li>
<li>3-point hitch hookup provides more strength</li>
<li>Front and rear chain shields offer safety</li>
</ul>


MX6 Rotary Cutter

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Newly-designed cutting chamber</li>
<li>New front and rear suspension options</li>
</ul>


M15 Flex Wing Rotary Cutter

View Product Brochure

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p><em>NOTE: Only for single spindle and multi-spindle.</em></p>
       <p> </p>
       <p>John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.</p>
       <p> </p>
       <p>The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.</p>
       <p> </p>
       <p>To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.</p>
       <p> </p>
       <p>Here are situations when a rotary cutter provides value:</p>
       <ul>
        <li>
         <div>
          Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
         </div></li>
        <li>
         <div>
          Cutting grass and stalks helps control insects.
         </div></li>
        <li>
         <div>
          Routine cutting keeps weeds from reseeding.
         </div></li>
        <li>
         <div>
          It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
         </div></li>
        <li>
         <div>
          Cutting grass waterways encourages root development and helps prevent erosion.
         </div></li>
        <li>
         <div>
          Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
         </div></li>
        <li>
         <div>
          Clearing out brush.
         </div></li>
        <li>
         <div>
          Control undergrowth and grass in orchards, vineyards, and groves.
         </div></li>
       </ul>
       <p>Decide what model to use based on:</p>
       <ul>
        <li>The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.</li>
        <li>The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.</li>
        <li>Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.</li>
       </ul>
       <p>John Deere rotary cutters are available in two duty-level categories:</p>
       <ul>
        <li>
         <div>
          Mid-duty
         </div>
         <ul>
          <li>
           <div>
            MX models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
           </div></li>
          <li>
           <div>
            This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
           </div></li>
         </ul></li>
        <li>
         <div>
          Heavy-duty
         </div>
         <ul>
          <li>
           <div>
            HX models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
           </div></li>
          <li>This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.</li>
          <li>
           <div>
            HX6 is available in 1.8-m (6-ft) and the HX7 is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.
           </div></li>
         </ul></li>
       </ul>
       <p><em>NOTE: HX models are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.</em></p>
      </div>

What is the best cutter for your job?

<div>
       
       <p>The patented Double-Decker design improves strength and cutting performance while reducing top deck rust. Two welded decks include a 3-mm (11-gauge, 0.118-in.) to 3.5-mm (10-gauge, 0.138-in.) thick upper deck, depending on the model, and a 3-mm (11-gauge, 0.118-in.) to 4.5-mm (7-gauge, 0.177-in.) thick lower deck, depending on the model.</p>
       <p> </p>
       <p>Internal stiffeners are sandwiched between the decks to add extra strength and rigidity.</p>
       <p> </p>
       <p>The Double-Decker design also provides a sturdy base to support the gearcases. Gearcases need this sturdy base to resist the bending loads imposed upon them when blades contact immovable objects or the ground.</p>
       <p> </p>
       <p>The bottom deck is the main defense against rocks and field debris, to help protect the top deck from impacts so it will retain its smooth form.</p>
      </div>

Patented John Deere Double-Decker™ design for superior frame strength

<div>
       
       
       <p>The John Deere gearboxes:</p>
       <ol>
        <li>Large seals</li>
        <li>Large housing</li>
        <li>Large output shaft</li>
        <li>Precision forged bevel gears</li>
        <li>Large bearings</li>
        <li>Stump jumper</li>
       </ol>
       <p>Re-engineered gearcases and blade holders provide the following:</p>
       <ul>
        <li>
         <div>
          More horsepower
         </div></li>
        <li>
         <div>
          Faster blade-tip speed
         </div></li>
        <li>
         <div>
          Better performance
         </div></li>
        <li>
         <div>
          Quieter operation
         </div></li>
        <li>
         <div>
          Increased durability
         </div></li>
       </ul>
      </div>

Gearcases and blade holders provide better performance

<div>
       
       <p>Gearcases are John Deere engineered for reliability and dependability.</p>
       <ul>
        <li>Transfer (center gearcase) – 120 continuous hp or 180 peak hp</li>
        <li>Outer gearcases – 100 continuous hp or 140 peak hp</li>
       </ul>
       <p>Heavy-duty, tapered roller bearings and precision gears help ensure long life.</p>
       <p> </p>
       <p>Output shafts are splined, not just keyed, for extra strength and durability.</p>
       
       <p>Gearcases mount on heavy-duty bowl supports, which are continuously welded to the top and bottom decks. These bowls provide a lifelong base of support for the gearcase/blade holder mechanism.</p>
       <p> </p>
       <p>The HX10 model comes standard with five year warranty.</p>
      </div>

Larger, more durable gearboxes

<div>
       <h5>Suction blades</h5>
       
       <p>Suction blades provide additional lift action for picking up downed material. The blades are 1.3 cm x 10.2 cm (0.5 in. x 4 in.) in size and heat-treated for long wear life.</p>
       <p> </p>
       <p>A fast blade-tip speed (up to 16889 fpm) ensures clean cutting and fine shredding of material.</p>
       <h5>Flat blades</h5>
       
       <p>Flat blades are effective for any materials not downed and require suction for lifting.</p>
       <p> </p>
       <p>Flat blades require less horsepower and have a cutting edge on both sides. Only available with double-blade system.</p>
       <h5>Dual blades (bar-type bladeholder only)</h5>
       
       <p>Dual blades are effective for increased shredding of crop residue.</p>
       <p> </p>
       <p>The dual blades consist of a 1.3-cm x 10.2-cm (1/2-in. x 4-in.) lower suction blade and a 1.3-cm x 7.6-cm (1/2-in. x 3-in.) upper suction blade.</p>
      </div>

Blades ensure clean cutting and fine shredding

<div>
       <h5>Lift type</h5>
       
       <p>The lift-type versions fit tractors with Category 2, 3, or 3N 3-point hitches (with or without Quick Hitch).</p>
       <p> </p>
       <p><em>NOTE: The l</em><em>ift-type versions require a larger tractor than other versions. For HX10 Lift-Type Rotary Cutters, the minimum-size tractor recommended is a 6020 Series or equivalent. For HX14 Lift-Type Rotary Cutters, the minimum-size tractor recommended is a 7720 or equivalent. Refer to the tractor's operator's manual for ballasting instructions. The pull-type versions of the HX10 Multi-Spindle Rotary Cutter require a tractor with a minimum of 50 power take-off (PTO) hp. The HX14 pull-type versions require a tractor with a minimum of 60 PTO hp. Note that the type and volume of material being cut affect horsepower requirements.</em></p>
       <h5>Pull type</h5>
       
       <p>Parallel lift linkage helps keep the cutter level through all height adjustments. Cylinders are John Deere manufactured, meaning more reliability and durability.</p>
      </div>

Tractor hookup available in two configurations

<div>
       <h5>Five-year limited gearbox warranty provided on every John Deere rotary cutter</h5>
       
       <p>John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.</p>
       <p> </p>
       <p>There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.</p>
      </div>