<ul style="list-style-type: disc;">
<li>Cat. 1/2 Quick Hitch</li>
<li>Replaceable Bolted on Cutting Point</li>
<li>Depths ranging from 19 inches to 23 inches depending on the shank length.</li>
<li>Available in Major Tractor Colors</li>
</ul>


DSS2S/1L Heavy Duty Subsoilers

Bush Hog

<p><strong>Performance Features</strong></p>
<ul>
<li>3210 Series comes in a Lift, Pull, Semi-Mount &amp; Offset Model</li>
<li>Rubber Element Cross Shafts</li>
<li>Heavy Duty Cushioned Axles</li>
<li>Two Round Blade Holders</li>
<li>See Specifications Page For Models 3210 &amp; 3210 Offset</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>10-gauge Deck Construction</li>
<li>7-gauge Strongbacks</li>
<li>1/4-inch Sidebands</li>
<li>Rubber Cushioned Axle Arms</li>
<li>5 Year Gearbox Limited Warranty</li>
<li>Powder Coat Paint</li>
</ul>
<p>&nbsp;</p>


3210 Lift Series Multi-Spindle Rotary Cutters

<p><strong>Performance Features</strong></p>
<ul>
<li>Wing skids are 3/8&rdquo; thick for extended wear and outside edges are turned up at 45&deg; to stop heavy ground contact thatmight damage the sidebands.</li>
<li>Center section blades properly align with center wheels to closely cut out the bottom of ditches.</li>
<li>Grease fittings and spring steel bushings at axle pivot points for longer life.</li>
<li>Free wing float without movement of the hydraulic cylinder rod is 22&deg; down and 45&deg; up.</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.</li>
<li>The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.</li>
<li>Bush Hog&rsquo;s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.</li>
</ul>
<p>&nbsp;</p>


3810 Single Flex-Wing Series Rotary Cutters

<h5><strong>Performance Features </strong></h5>
<ul style="list-style-type: disc;">
<li>25&rdquo; Rotor with 2 Knives at 74 lbs.</li>
<li>25gpm recommended flow</li>
<li>20-30gpm flow range</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>4&rdquo; Diameter Capacity (Max. 10&rdquo; Slab)</li>
<li>4&rdquo; x 10&rdquo; Chipper Housing Opening</li>
<li>65&rdquo; Discharge Hood Height</li>
<li>740 lbs. Total Weight</li>
<li>Dimensions (LxWxH) 80&rdquo; x 57&rdquo; x 72&rdquo;</li>
</ul>


XC42S, XC Series Wood Chipper

<ul style="list-style-type: disc;">
<li>All Purpose Plows range in working widths from 44&rdquo; to 80&rdquo;.</li>
<li>Three point lift Cat. 1 Standard or Quick Hitch.</li>
<li>Frame construction is 2-1/2&rdquo; x 2-1/2&rdquo; x 3/8&rdquo; angle iron.</li>
<li>Reversible Plow Points and are made of High Carbon steel</li>
</ul>


All Purpose Plows

<h5><strong>Performance Features </strong></h5>
<ul style="list-style-type: disc;">
<li>25 Ton 36&rdquo; Splitting Length</li>
<li>4.5&rdquo;/36&rdquo; Cylinder Diameter/Stroke</li>
<li>13 GPM Recommended Minimum Hydraulic Flow</li>
<li>Average Cycle 11.43 seconds*</li>
<li>Full Cycle 22.86 seconds*</li>
<li>*depends on flow from tractor/skidsteer</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>Horizontal Splitter Orientation</li>
<li>Dimensions (LxWxH) 90&rdquo; x 36&rdquo; x 22&rdquo;</li>
<li>Weight 680 lbs.</li>
<li>Optional 4 Way Wedge: W4130</li>
</ul>


LS2536S Log Splitter

<ul style="list-style-type: disc;">
<li>Quick Hitch Compatible</li>
<li>Heavy-Duty Boxed Frame</li>
<li>Heavy-Duty A Frame</li>
<li>Heat-Treated Reversible and Replaceable Cutting Edges</li>
<li>Double Strap Hitch</li>
<li>Heat-Treated Scarifier Teeth</li>
<li>Heavy Duty End Plates</li>
<li>Powder Coat Paint</li>
</ul>


Roll Over Box Blade

<p><strong>Performance Features</strong></p>
<ul>
<li>Heavy duty augers equipped with double flighting for more cutting surfaces and faster digging</li>
<li>Special alloy pinion gears and tapered roller bearings on both sides of each gear</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>2400 Series model fits both Cat. 1 and Cat. 2 tractors</li>
<li>Offered in both regular duty and heavy duty augers in sizes from 6-inch to 12-inch</li>
<li>Rugged gearbox construction</li>
<li>Shear pin driveline protection</li>
<li>Options include Hydraulic Down Force Kit, Parking Stand, and Auger Extensions</li>
</ul>
<p>&nbsp;</p>
<p>&nbsp;</p>


PHD2401 Post Hole Digger

<p><strong>Performance Features</strong></p>
<ul>
<li>Bush Hog&reg; Performance in an Economical Pasture Mower</li>
<li>9-feet 9-inches Cutting Width</li>
<li>Rubber cushioned axles gives load protection when working on rough terrain.</li>
<li>Manual or hydraulic lift, single or dual axles on pull models.</li>
<li>High Blade Tip Speeds</li>
<li>Round blade pans are standard equipment.</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>Available In Lift, Pull &amp; Semi-Mount</li>
<li>5 Year Gearbox Limited Warranty</li>
<li>Floating A Frame HItch</li>
<li>Strongbacks are 7 gauge box steel</li>
<li>Drivelines are fully shielded and tough slip clutches standard on all models.</li>
<li>Deep side bands and high blade tip speeds assure better cutting performance.</li>
<li>Round blade pans are standard equipment.</li>
</ul>
<p>&nbsp;</p>


SQ84T Multi-Spindle Rotary Cutters

<p><strong>Performance Features</strong></p>
<ul>
<li>Free Wing Float, without movement of each hydraulic cylinder rod, is 22&deg; down and 45&deg; up.</li>
<li>Each cutting gearbox has the industry&rsquo;s first massive 3-inches output shaft with more splines that are deeper for maximum transmission of torque to the blade pan.</li>
<li>The 2820 is available with Round Blade Carriers or Straight Shredder Blade Bars. The optional Shredder Kit will increase the shredding performance even more that the straight shredder bars.</li>
<li>An optional Material Distribution Baffle Kit spreads cut material to eliminate windrows.</li>
<li>Each wing has a single deck without exposed structure underneath.</li>
<li>The 2820 is available with optional deck rings that reduce the possibility of blade to deck contact.</li>
</ul>
<p><strong>Construction Features</strong></p>
<ul>
<li>Blade Pans are reinforced for maximum durability.</li>
<li>Spring Axle Cushions are located near each wheel for maximum shock absorption.</li>
<li>Wing Skids are formed upward at 45&deg; to prevent &ldquo;dig in&rdquo; on turns that might damage the sideband.</li>
<li>Grease Fittings and Spring Steel Bushings for minimum wear are at each axle pivot point.</li>
<li>The center section has a doubled deck with no exposed structure for a smooth flow of cut material.</li>
</ul>
<p>&nbsp;</p>


2820 Flex-Wing Rotary Cutter

<h5><strong>Performance Features </strong></h5>
<ul style="list-style-type: disc;">
<li>20 Ton 24&rdquo; Splitting Length</li>
<li>4&rdquo;/24&rdquo; Cylinder Diameter/Stroke</li>
<li>10 GPM Recommended Minimum Hydraulic Flow</li>
<li>Average Cycle 6.62 seconds*</li>
<li>Full Cycle 13.24 seconds*</li>
<li>*depends on flow from tractor/skidsteer</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>Inverse Horizontal Splitter Orientation</li>
<li>Dimensions (LxWxH) 66&rdquo; x 36&rdquo; x 22&rdquo;</li>
<li>Weight 339 lbs.</li>
<li>Optional 4 Way Wedge: W4120</li>
<li>Built-in stripper plates</li>
</ul>


LS2024IS Log Splitter (Inverted)

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

Sub-Soilers

<ul style="list-style-type: disc;">
<li>Single shank equipped with a replaceable tip</li>
<li>Beveled edge of the high carbon steel shank</li>
<li>Cat I Standard and Quick Hitch.</li>
<li>Shear pin protection</li>
</ul>


SS1 3-PT Std. Duty Subsoiler

DSS1S/1L Heavy Duty Subsoilers

Tillage

<h5><strong>Performance Features </strong></h5>
<ul style="list-style-type: disc;">
<li>Adjustable gang angles, front and rear, using an easy-tograsp handle</li>
<li>Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series</li>
<li>Variable Blade Spacings Available: 9 in. front and rear gangs for tough-to-cut &ldquo;New Ground&rdquo; &bull; 7 1/2 in. front and rear gangs for finer soil finishing &bull; 9 in. front gangs/7 1/2 in. rear gangs&ndash;the best of both worlds</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>Square and rectangle tube steel frames and gang tubes</li>
<li>Self-aligning, sealed ball bearings</li>
<li>Notched disc blades for maximum cutting action</li>
<li>1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series</li>
<li>Available in tractor colors</li>
<li>Optional disc scrapers</li>
</ul>


Lift Disc Harrow (3D Series)

<ul style="list-style-type: disc;">
<li>Gear drive with oil bath in side gearbox is more durable than a chain drive that will wear and could break.</li>
</ul>


RTX Series Rotary Tillers

<h5><strong>Performance Features</strong> </h5>
<ul style="list-style-type: disc;">
<li>Adjustable gang angles, front and rear, using an easy-tograsp handle</li>
<li>Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series</li>
<li>Variable Blade Spacings Available: 9&rdquo; front and rear gangs for tough-to-cut &ldquo;New Ground&rdquo; &bull; 7 1/2 in. front and rear gangs for finer soil finishing &bull; 9 in. front gangs / 7 1/2 in. rear gangs&ndash;the best of both worlds</li>
</ul>
<h5><strong>Construction Features </strong></h5>
<ul style="list-style-type: disc;">
<li>Square and rectangle tube steel frames and gang tubes</li>
<li>Self-aligning, sealed ball bearings</li>
<li>Notched disc blades for maximum cutting action</li>
<li>1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series</li>
<li>Available in tractor colors</li>
<li>Optional disc scrapers</li>
</ul>


Lift Disc Harrows (1D Series)

<ul style="list-style-type: disc;">
<li>Ideal for all conditions</li>
<li>Suspended wheels operate with the influence of adjacent wheel, allowing for better contours</li>
<li>High ground clearance from the main frame for high performance in heavy crop conditions</li>
<li>Leading wheel can be raised when there is a need to reduce windrow volume</li>
</ul>


BSR Hay Rake

<h5>Performance Features</h5>
<ul style="list-style-type: disc;">
<li>Wheel</li>
</ul>
<h5>Construction Features</h5>
<ul style="list-style-type: disc;">
<li>EWR wheel “V” rakes are available in 8 and 10 wheel models</li>
<li>The standard 195-70R/15 tires provide maximum stability</li>
</ul>


Wheel Driven EWR Rakes

<ul>
<li>Square and rectangle tube steel frames and gang tubes</li>
<li>Adjustable gang angles, front and rear</li>
<li>Variable Blade Spacings Available: 9&rdquo; front and rear gangs for tough-to-cut &ldquo;New Ground&rdquo; </li>
<li>7 1/2&rdquo; front and rear gangs for finer soil finishing </li>
<li>9&rdquo; front gangs/7 1/2&rdquo; rear gangs&ndash;the best of both worlds</li>
<li>Notched disc blades for maximum cutting action</li>
<li>1 1/8&rdquo; square, high carbon steel gang axles</li>
<li>Available in tractor colors</li>
<li>Optional disc scrapers, Center Sweep Kit, Dual Wheel Transport Kit</li>
</ul>


DSS2S/1L Heavy Duty Subsoilers

Similar Products

SS1 3-PT Std. Duty Subsoiler

DSS1S/1L Heavy Duty Subsoilers