<ul>
<li>80-ft. toolbar with 32 rows on 30-in. spacing</li>
<li>Available in mini-hopper, 1.6-bu., or 3-bu. ExactEmerge or MaxEmerge™ 5e row unit</li>
<li>Insecticide option for mini-hopper and 1.6-bu.</li>
<li>Requires a minimum 300-hp tractor equipped with Category 4 drawbar</li>
</ul>


DB80 32Row30 Planter

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Planting Equipment

<ul>
<li>Single electric motor with seed tube delivery</li>
<li>Improves population accuracy on curves</li>
<li>More accurate planting to variable rate perscription</li>
<li>Easy upgrade opportunity to ExactEmerge row unit</li>
</ul>


MaxEmerge™ 5e Row Unit

<ul>
<li>60-ft. toolbar with 36 rows on 20-in. spacing</li>
<li>Twin-row configuration for 72 rows total</li>
<li>Equipped with MaxEmerge™ 5 twin row-units</li>
<li>Pro-Shaft™ variable-rate drive standard</li>
</ul>


DB60T Planter

<ul>
<li>60-ft. toolbar with 24 rows on 30-in. spacing</li>
<li>Available in mini-hopper ExactEmerge or MaxEmerge5e row unit</li>
<li>Insecticide option for mini-hopper</li>
<li>Requires a minimum 235-hp tractor equipped with Category 4 drawbar</li>
</ul>


DB60 24Row Split 48 Planter

<ul>
<li>66-ft. toolbar with 36 rows on 22-in. spacing</li>
<li>Available in mini-hopper, 1.6-bu., or 3-bu. ExactEmerge or MaxEmerge™ 5e  row unit</li>
<li>Requires a minimum 275-hp tractor equipped with Category 4 drawbar</li>
</ul>


DB66 36Row22 Planter

<ul>
<li>12 rows on 30-in. spacing</li>
<li>Available with optional ExactEmerge™ or MaxEmerge™ 5e row unit or standard in mini-hopper, 1.6-bu., or 3-bu. MaxEmerge™ 5 row unit</li>
<li>Insecticide option for mini-hopper and 1.6-bu.</li>
<li>3-section frame flexes 21 degrees up &amp; down with narrow transport of 12 ft.</li>
</ul>


1775NT 12Row30 Drawn Planter

<ul>
<li>12 rows with spacings of 30 in., 36 in., 38 in., 40 in., and 100 cm.</li>
<li>Available in ExactEmerge™, MaxEmerge™ 5e and MaxEmerge™ 5 row units.</li>
<li>Choose from Central Commodity System (CCS) or non-CCS options</li>
</ul>


DR12 Planter

<ul>
<li>Industry-exclusive brush belt delivery system</li>
<li>High-performance vacuum meter</li>
<li>Brush-style doubles eliminator</li>
<li>Dual electric motors</li>
</ul>


ExactEmerge™ Row Unit

<ul>
<li>12 rows on 30-in. spacing</li>
<li>Available in 1.6-bu. or 3-bu. MaxEmerge™ 5 row unit</li>
<li>Insecticide option for 1.6-bu.</li>
<li>2-section frame flexes 20 degrees up &#038; 30 degrees down</li>
</ul>


1775 Flex Drawn Planter

<ul>
<li>24 rows with spacings of 20 in., 22 in., and 30 in.</li>
<li>Available in ExactEmerge™, MaxEmerge™ 5e and MaxEmerge™ 5 row units.</li>
<li>Choose from Central Commodity System (CCS) or non-CCS options</li>
</ul>


DR24 Planter

<ul>
<li>60-ft. toolbar with 36 rows on 20-in. spacing</li>
<li>Available in mini-hopper, 1.6-bu., or 3-bu. ExactEmerge or MaxEmerge™ 5e row unit</li>
<li>Insecticide option for mini-hopper</li>
<li>Requires a minimum 275-hp tractor equipped with Category 4 drawbar</li>
</ul>


DB60 36Row20 Planter

View Product Brochure

<p>Harvesting equipment, cutters, shredders, hay &amp; forage equipment, planting &amp; seeding equipment, sprayers and tillage equipment</p>


BALR: Farm Equipment

<div>
       
       <p>The ExactRate fluid transfer system pairs planters seamlessly with the ExactRate tractor tanks. It provides an easy connection point to allow transfer from the ExactRate tractor tanks back to the planter tank. This enables up 6056 L (1600 gal.)* of combined capacity between the tractor and planter tanks.</p>
       <p> </p>
       <ul>
        <li>Factory installed</li>
        <li>Designed and tested by John Deere to ensure the lines won’t pinch when folding</li>
        <li>Easily attaches to the ExactRate tractor tanks</li>
       </ul>
       <p> </p>
       <p>ExactRate is available on the following models: 1775NT, 1795, DB44, DB60, and DB66.</p>
       <p> </p>
       <p><em>*NOTE: 6056 L (1600 gal.) assumes a 2271-L (600-gal.) tank on a 24-Row 1775NT Planter as well as the 3785-L (1000-gal.) capacity on the 8RX Tractor.</em></p>
       
      </div>

Easy fluid transfer with the ExactRate™ fluid transfer system

<div>
       
       <p>John Deere factory-installed liquid tanks offer a convenient way to carry fluid on the planter frame. Styling cues match the CCS™ system tanks, and all brackets and mountings are 100 percent factory installed.</p>
       <p> </p>
       <ul>
        <li>Factory installed</li>
        <li>Up to 2271 L (600 gal.) of fluid capacity</li>
        <li>Clear sight tube to check fluid level</li>
        <li>Air bleed and overflow protection</li>
       </ul>
       
      </div>

Easily carry fluid on the planter with liquid tanks

<div>
       
       <p>The ExactRate liquid fertilizer system is a factory-installed solution that provides you with accurate nutrient placement during planting. Previously, you would have to deal with the inconvenience of cumbersome aftermarket systems for a hydraulically driven variable-rate solution. With ExactRate, John Deere delivers a complete planting solution for liquid fertilizer users. You can choose between in-furrow or offset delivery methods. A high-rate option without openers is also offered from the factory. This system delivers:</p>
       <p> </p>
       <ul>
        <li>Up to 20 percent more accurate nutrient placement in a turn compared to a non-turn compensating system</li>
        <li>1 to 12 percent (4.3 percent on average) reduction in inputs through row-by-row section control</li>
        <li>Ability to run up to 16.1 km/h (10 mph)</li>
        <li>Closed-loop speed and rate change compensation</li>
        <li>Full integration into the 4600 CommandCenter™ and 4640 Universal Display</li>
       </ul>
       
       <p>The ExactRate liquid fertilizer system is designed to take full advantage of the capabilities of ExactEmerge™ and MaxEmerge™ 5e planters. This factory-installed liquid fertilizer system delivers the same value as your electric drive planter including working at speeds faster than the traditional 8.05 km/h (5 mph), turn compensation, and row-by-row section control, all while accurately compensating for varying rates and speed changes. Additional features include row-by-row flow detection, as-applied documentation, and variable-rate capabilities, providing operators full integration into the 4600 CommandCenter or 4640 Universal Display. </p>
       <p> </p>
       <p>Fertilizer flows from the tank to the pump, through a strainer and boom isolation valve, through a central flowmeter, and out to each nozzle body and row-unit for accurate delivery. The system is closed loop, meaning the pump and nozzle body duty cycle both adjust based on feedback received from the pressure sensor and central flowmeter. This design helps maintain an accurate application rate.</p>
       <p> </p>
       <p><em>NOTE: ExactRate is not recommended for products that require agitation to maintain suspension.</em></p>
       <h5>Pump</h5>
       
       <p>Instead of a tire-contact drive, a hydraulically driven centrifugal pump eliminates chain and sprocket adjustments to provide more speed flexibility over the entire rate range. This pump allows for a wide range of rate capabilities as well as strong durability. The wet seal design helps protect the pump if it is accidentally run dry for a short time. </p>
       <h5>Strainer</h5>
       
       <p>A strainer helps collect suspended particles and prevent them from causing blockages in the distribution system and nozzle bodies.</p>
       <h5>Boom isolation valve</h5>
       
       <p>The valve prevents the tank from draining out if there is a leak in the distribution system. If the pump is on, the valve opens to allow flow. When the pump is off, the valve closes.</p>
       <h5>Central flowmeter and pump pressure sensor</h5>
       
       <p>The central flowmeter and pump pressure sensor provide the rate control system feedback on flow and pressure to ensure an accurate application rate across the entire planter width. The flowmeter also supplies the as-applied rate data.</p>
       <h5>Distribution system and nozzle body</h5>
       
       <p>The 2.5-cm (1-in.) stainless-steel distribution lines not only reduce corrosion, but they also provide a clean integrated look.  The distribution system is pressure tested at the factory to reduce the risk of leaks.</p>
       <p> </p>
       <p>John Deere has leveraged ExactApply™ technology and capabilities from the sprayers to enable row-by-row section control and turn compensation that matches the high-performance planters. With ExactRate, there are no orifice changes for rate or speed adjustments, saving you time and effort while limiting exposure to product. Pulse-width modulation technology varies duty cycle (opening and closing of the valve) in the nozzle bodies in conjunction with flow and pressure measured from central flowmeter and pressure sensor controlling the system pump. The ExactRate liquid fertilizer system uses one nozzle body for two rows, limiting the number of parts and complexity on each machine. While you’re in the cab, you can keep an eye on each row with flow detection integrated into the Gen 4 display. The system warns you if it detects a variance in an individual row’s flow. A pressure sensor integrated into the nozzle body will detect a flow reduction or overapplication on the row.</p>
       
       <p>Just like on the sprayers, the keypad at the rear of the machine lets you conveniently perform a nozzle flow check to ensure product is coming out of each row before going to the field.</p>
       <h5>Rate Controller</h5>
       
       <p>The ExactRate liquid fertilizer system is compatible with the John Deere Rate Controller 2000 and GreenStar™ Rate Controller if a producer wants to apply a second product using a separate distribution system.</p>
       <h5>Direct injection</h5>
       
       <p>The ExactRate liquid fertilizer system does not have direct injection capabilities on the product being applied. If direct injection is needed on the secondary product, an additional rate controller is required.</p>
       <p><em> </em></p>
       <p><em>NOTE: ExactRate system and John Deere Rate Controller 2000 with Raven ICD Direct Injection system is supported. ExactRate system and GreenStar Rate Controller with Raven ISO Direct Injection system is not supported.</em></p>
       <h5>ExactRate app on Gen 4</h5>
       
       <p>Easily adjust target rate and speed without leaving your seat. With turn compensation, inner and outer rates are automatically adjusted to maintain consistent application across the full width of the planter. This ultimately reduces the risk of seed burn by over application (turn compensations require a global positioning system [GPS] receiver). Another helpful feature is row-by-row section control for reduced overlap on headlands and waterways. Gen 4 Documentation creates as-applied maps showing what product was applied where, providing accurate record-keeping.</p>
      </div>

Precise liquid fertilizer placement with ExactRate™ fertilizer system

<div>
       
       <p>As planting windows get tighter, many growers are working longer hours to get the seed in the ground. With the planter LED lighting package, John Deere delivers better visibility when planting a night.</p>
       <p> </p>
       <ul>
        <li>Four additional LED lights</li>
        <li>Improves visibility when planting at night</li>
        <li>Illuminates row-units when servicing at night</li>
        <li>Turns on when tractor lights are engaged</li>
       </ul>
      </div>

Increase visibility at night with light-emitting diode (LED) lighting package

<div>
       
       <p>Have you wanted to view more than one planter chart at once? SeedStar 4HP gives you multiple views and configurations in one simple overview page to fit your preferences. You can complete the simplified setup from the Work Setup page instead of having multiple applications to open.</p>
       <p> </p>
       <p>SeedStar 4HP is designed to optimize the in-cab monitoring experience exclusively on the Gen 4 4600 CommandCenter™ display or 4640 Universal Display for growers with ExactEmerge™ planters and MaxEmerge™ 5e planters. With SeedStar 4HP, operators will easily see key planter information with customizable run pages, zoom functionality, and simultaneous graph and performance measurements. SeedStar 4HP is included in base on all model year 2018 ExactEmerge and MaxEmerge 5e planters.</p>
       <p> </p>
       <p>Features overview:</p>
       <ul>
        <li>View multiple planters' at-a-glance bar charts simultaneously</li>
        <li>Three default planter run pages show key planter functions in easy-to-view layouts</li>
        <li>Highly configurable run pages allow SeedStar modules to be customizable</li>
        <li>Zoom feature allows quick row-by-row detailed information</li>
        <li>View dual bar graphs to see multiple planter details at one time</li>
        <li>SeedStar application to make adjustments to planter functions</li>
        <li>Simplified setup through the work set-up page</li>
        <li>Advanced rates allow up to six different rates across 48 rows</li>
        <li>The SeedStar 4HP monitoring system requires the Gen 4 4600 CommandCenter or 4640 Universal Display. These displays allow the operator to benefit from the updated interface, enhanced processing speeds, and easy setup (learn more <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/ams/2020/feature/autotrac/cc_gen4_advantages.html">here</a>).</li>
       </ul>
       <p> </p>
       <p><strong>SeedStar 3 HP conversion to SeedStar 4HP with mobile row-unit runoff aftermarket for field conversion kits</strong></p>
       <p> </p>
       <p>Growers who are currently running model year 2017 planters, model year 2017 and newer performance upgrade kits, or model year 2017 and newer custom-built planters with the SeedStar 3 HP monitoring system can upgrade to the SeedStar 4HP monitoring system with mobile row-unit runoff. The attachment part, AA100382, is software only. The Gen 4 display software version will need to be 19-1 or newer and will require planter apps. Follow the <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/media_files/NA/seeding/mobile_runoff_order_process.pdf">mobile runoff ordering and software push guide</a> below for ordering and installation. Retrofitted planters and custom-built planters will also require the John Deere Connect Mobile kit, 0048PC, from the Precision Ag Technology Price Pages and wiring harness AA83662 to enable the mobile row-unit runoff feature. Please reference Parts Advisor and <a href="https://ccms.deere.com/prweb/PRServletCustomAuth/ZDate_MgiNPn1ccL6O6pyBurDs0hjFQ8*/!STANDARD?pyActivity=SolutionsSnapStart&amp;Action=showHarness&amp;className=Deere-Int-Solr-Docs&amp;Purpose=SolutionDescriptionNew&amp;SolutionID=105181&amp;Language=Default">DTAC Solution 105181</a> for model-specific mounting brackets. SeedStar 4HP requires the Gen 4 4600 CommandCenter v2 display or 4640 Universal Display.</p>
       <h5>Default planter run pages</h5>
       
       <p>Three default run pages show key planter functions in different views to give fast and easy access to important planter information.</p>
       <h5>Custom run pages</h5>
       
       <p>There are customizable run pages that allow the operator to build pages that fit their operation with different modules, like the example shown above.</p>
       <h5>Zoom functionality</h5>
       
       <p>The zoom feature allows the operator to touch a section or row of the planter and get detailed information quickly.</p>
       <h5>Dual bar graphs</h5>
       
       <p>Dual bar graphs allow operators to view multiple planter details at one time.</p>
       <h5>SeedStar application page</h5>
       
       <p>In the SeedStar application, many adjustments can be made, including manually activating section control. SeedStar 4HP allows up to 48 individual row sections. There are several setup features such as crop, seed disk, number of rows being planted, population alarms, and limits. Seed rates can be modified, electric power generation (EPG) can be turned on or off, vacuum can be adjusted, and the fill and purge functions can be used from the SeedStar application. Frame control, as well as diagnostics and calibrations, can be accessed at the bottom of the screen.</p>
       <h5>Settings Manager in SeedStar 4HP</h5>
       
       <p>Reduce set-up time between changing crops or field conditions by recalling saved settings used previously with Settings Manager, included with every SeedStar 4HP system. This feature allows saving and recalling planter and tractor settings for optimum performance in different conditions.</p>
       <p> </p>
       <p>Settings Manager can be used to save all the adjustment and inputs associated to a particular crop or condition. An example would be to store all population rates, downforce pressure, row cleaner adjustments, and closing wheel settings for planting corn and storing a separate, unique set of adjustments for soybeans. In addition, Settings Manager stores tractor settings such as selective control valve (SCV) flow and detents, infinitely variable transmission (IVT™) settings, eco modes, and more.</p>
       <h5>Custom rates in SeedStar 4HP</h5>
       
       <p>Custom rates allow for individual row population control and row-by-row documentation where up to six different rates can be assigned across an up to 48-row planter. This allows growers interested in planting seed corn with ExactEmerge or MaxEmerge 5e the capability to assign specific populations to male and female rows for planting. This feature can also be used to create tram lines or other applications where custom rates by row are needed.</p>
       <p> </p>
       <p><em>NOTE: Individual rates are tied to varieties, so each individual rate needs a unique variety name.</em></p>
       <p><em>NOTE: Advanced rates are not compatible with prescriptions or they cannot be run at the same time.</em></p>
       <h5>Compatibility</h5>
       
       <table class="table table-striped table-bordered">
        <tbody>
         <tr>
          <td> </td>
          <td><strong>SeedStar 4HP compatibility</strong></td>
         </tr>
         <tr>
          <td><strong>Planters</strong></td>
          <td><p>All models ordered with ExactEmerge or MaxEmerge 5e row-units</p><p><em>NOTE: Performance upgrade kits are equipped with SeedStar 3HP only but can be upgraded by purchasing part number AA100382.</em></p></td>
         </tr>
         <tr>
          <td><strong>Displays</strong></td>
          <td><p>Gen 4 4600 CommandCenter equipped with Version 2 Processor or 4640 Universal Display</p><p>Dual-display mode is compatible with mid model year 2019 planter software.</p></td>
         </tr>
         <tr>
          <td><strong>John Deere Active Implement Guidance™</strong></td>
          <td>Compatible with SeedStar 4HP on Gen 4 displays with VT mode and required activations and subscriptions</td>
         </tr>
         <tr>
          <td><strong>AutoTrac™ Implement Guidance</strong></td>
          <td>SeedStar 4HP is compatible with AutoTrac Turn Automation and AutoTrac Implement Guidance; not compatible with electric drive planters larger than 48 rows.</td>
         </tr>
         <tr>
          <td><strong>AutoTrac Turn Automation</strong></td>
          <td>SeedStar 4HP is compatible with AutoTrac Turn Automation and AutoTrac Implement Guidance; not compatible with electric drive planters larger than 48 rows.</td>
         </tr>
        </tbody>
       </table>
       <h5>Additional information</h5>
       
       <p>For additional information on feature functionality on the Gen 4 display, visit the links below:</p>
       <ul>
        <li><a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/seeding/2022/feature/row_units_and_drill_opener/planters/downforce_system.html">Individual Row Hydraulic Downforce (IRHD)</a></li>
        <li><a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/seeding/2022/feature/exact_emerge/easy_adjust_row_clean.html">Easy Adjust row cleaners</a></li>
       </ul>
       <p>YouTube is a trademark of Google LLC.</p>
      </div>

SeedStar™ 4HP monitoring system – see speed meet accuracy in real time

<div>
       
       <p>Option code 2625 – Liquid fertilizer with row-unit mounted in-furrow applicator:</p>
       <ul>
        <li>This option contains a ground driven pump, plumbing to a manifold, and routing to each row-unit. The in-furrow applicator places fertilizer after the seed and before the closing wheels.</li>
       </ul>
       <p>The DB60 24Row Split 47 Planter and DB60 24Row Split 48 Planter applies fertilizer on 76.2-cm (30-in.) row spacing only.</p>
      </div>

DB fertilizer options

<div>
       
       <p>The first day of planting season can be as productive as the last with mobile row-unit runoff. The mobile row-unit runoff activation on the planter main controller (PMC) allows operators to make adjustments to maximize row-unit performance from a mobile device at the rear of the planter for both preseason and in-season use - all enabled through the EquipmentPlus app.</p>
       <p> </p>
       <p>Mobile row-unit runoff allows growers to perform test-stand functions from a mobile device connected to the planter.</p>
       <p> </p>
       <p>The row runoff test provides complete diagnostic checks both preseason and in season. With the row-unit runoff test, the operator can make adjustments from the mobile device, including vacuum pressure, to determine the optimum meter and vacuum settings. This app functionality will help avoid making trips to the cab while validating meter performance.</p>
       <p> </p>
       <p>During preseason planter inspections and set up, utilize the meter performance test to validate meter accuracy, similar to a test stand without leaving the farm. Test all systems on the planter, not just the meter, providing confidence that all planter systems are ready to plant. Reports are generated from the test providing information the operator can save and send for future reference.</p>
       <p> </p>
       <p>Before heading to the field, the operator will benefit from knowing the best row-unit and vacuum settings for each variety selected to plant that spring.</p>
       <p> </p>
       <p>Watch <a href="https://www.youtube.com/watch?v=ydeqcZd6wIY">this video</a> to see mobile row-unit runoff in action.</p>
       <p> </p>
       <p>Mobile row-unit runoff will work with any model year 2015 or newer ExactEmerge™ or MaxEmerge™ 5e equipped planter. Mobile row-unit runoff can be added with attachment AA93169.</p>
       <p> </p>
       <p>For model year 2018 and newer ExactEmerge planters, mobile row-unit runoff is included in base equipment. For model year 2020 and newer MaxEmerge 5e planters, mobile row-unit runoff is included in base equipment. For planters not equipped from the factory, mobile row-unit runoff can be added with attachment AA93169. A mobile row-unit runoff and Easy Fold package can be added with attachment AA97849 (only available with 1775NT and 1795 Planters with a 2-point hitch and model year 2019 and newer DB Planters with Gen 4 based frame folding).</p>
       <p> </p>
       <p><em><em>NOTE: Mobile runoff utilizes the EquipmentPlus app available on select iPad® tablets, iPhone® smartphones, and Android™ devices.</em></em></p>
       <p> </p>
       <p><strong>Mobile row-unit runoff and Easy Fold aftermarket for field conversion kits</strong></p>
       <p> </p>
       <p>The below software bundles include the functionality explained above for machines not ordered with the feature from the factory. Compatible machines include all the necessary sensors and harnesses needed to make the feature function. The attachment part is software only. Follow the mobile runoff ordering and software push guide below for ordering and installation.</p>
       <p> </p>
       <p><a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/seeding/attachments/monitor_system/seedstar3_conversion_seedstar4.html">SeedStar™ 3 HP conversion to SeedStar 4HP</a></p>
       <p><a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/media_files/NA/seeding/mobile_runoff_order_process.pdf">Mobile runoff ordering and software push guide</a></p>
       <p> </p>
       <p>iPad and iPhone are trademarks of Apple Inc. Android is a trademark of Google LLC.</p>
      </div>

Mobile row-unit runoff

<div>
       <h5>Individual Row Hydraulic Downforce (IRHD)</h5>
       
       <p>IRHD has been specifically designed to meet the needs of producers that are looking to adjust to the toughest field conditions and provide maximum yield potential from field to field, season after season. IRHD works as a closed-loop downforce system that reacts quickly on an individual row basis to changing soil conditions supporting increased ground contact, which can lead to improved seed depth consistency. When setting planter downforce margin, the system will apply the needed downforce by row to maintain ground contact. From the factory, the margin will be set at 45.4 kg (100 lb), changes may be required based on varying field conditions.</p>
       
       <p>The system allows operators to maintain gauge wheel ground contact leading to desired seed depth placement. IRHD can adjust five times per second and make adjustments of 45.4 kg (100 lb) in less than a second. The system has a total range of applied downforce from 22.7 kg (50 lb) to 204.1 kg (450 lb) and utilizes the power beyond circuit on the tractor. IRHD is 58 percent faster than the active pneumatic downforce solution. Fast reaction and increased ground contact can lead to improved emergence. With uniform emergence, some studies have shown a yield impact from 5 percent to 9 percent.<br><br>IRHD is controlled through the display with SeedStar™ 3 HP or SeedStar 4HP. As shown below, operators can view ground contact or applied downforce using the toggle button.</p>
       
       <h5>Hydraulically driven compressor</h5>
       
       <p>The hydraulically driven air compressor can deliver up to eight times the air flow when compared to the electric compressor, allowing for more and faster downforce changes to be made. This more robust design features a 37.8-L (10-gal.) storage tank across all models with active downforce.</p>
       <p><br>At approximately 15.1 L/min (4 gpm), hydraulic demands are low and ties into the machine’s lift and Central Commodity System (CCS™) hydraulic circuit so it does not require any additional selective control valves (SCVs). The SeedStar XP, SeedStar 3 HP, and SeedStar 4 HP monitoring systems work with the compressor. SeedStar 3 HP and SeedStar 4 HP monitoring systems work with the compressor and valve assembly to regulate air to downforce springs, enabling the active control, pneumatic closing wheels, and pneumatic row cleaners.</p>
       <h5>Row-unit downforce planter run page</h5>
       
       <p>Active downforce control is integrated into SeedStar XP, SeedStar 3 HP, and SeedStar 4 HP monitoring systems.</p>
       <p> </p>
       <p>Margin is the amount of weight riding on the depth gauge wheels that ensures desired firming of the seedbed as set by the operator.</p>
       <p> </p>
       <p>Once a target margin has been defined, enter the value into the display and let active downforce do the rest. The system will actively adjust the air pressure in the air bags to maintain a constant margin across the planter. The changes in air pressure will change the amount of downforce placed on the row-unit, compensating and reacting for varying conditions through the field whether it is different tillage practices, soil types, or moisture.</p>
       
       <ul>
        <li>A - Margin – amount of additional downforce applied to a row-unit above and beyond what is required for penetration to achieve planting depth. This additional weight will ride on the depth gauge wheels. 
         <ul>
          <li>54.4 kg (120 lb) + 36.3 kg (80 lb) = 90.7 kg (200 lb) – 68 kg (150 lb) = 22.7 kg (50 lb) of margin</li>
         </ul></li>
        <li>B - Weight of row-unit - 54.4 kg (120 lb)</li>
        <li>C - Downforce – force that is applied to the row-unit by the air bag circuit - 36.3 kg (80 lb)</li>
        <li>D - Resistance from soil - 68 kg (150 lb)</li>
       </ul>
       <p> </p>
       <p>Margin video references:</p>
       <p><a href="https://www.youtube.com/watch?v=c9l0JQfL3cE">Understanding Margin</a></p>
       <p><a href="https://www.youtube.com/watch?v=HB2DF8KmBXI">Using Set Point downforce</a></p>
       <p><a href="https://www.youtube.com/watch?v=KNzNbD-RQxQ">Using Active Pneumatic downforce</a></p>
       <p><a href="https://www.youtube.com/watch?v=UNpIvtpODOs">SeedStar 4HP: Downforce</a></p>
       
       <p>A hydraulically driven compressor works with the SeedStar XP, SeedStar 3 HP, and SeedStar 4 systems to automate downforce control. Just set the row-unit target margin value and the active pneumatic downforce system works automatically. The system will make sure the planter maintains this value, achieving precise soil penetration, and consistent planting depth, without sidewall soil compaction. From the factory, the system is set at 45.4 kg (100 lb) target downforce margin but may be modified for varying field conditions. This frees the operator from constantly making manual downforce adjustments as conditions change.</p>
       <p> </p>
       <p>This system offers a split-rank control feature for 1795 and DB Split-Row Planters. On split-row planters, active downforce will control the front and rear rows independently. This compensates for differing downforce requirements between the ranks that can be caused by things like different tillage or insecticide attachments and will help maintain an accurate planting depth and consistent margin across all the rows.</p>
       <p> </p>
       <p>Active pneumatic downforce is available as factory installed or as an <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/seeding/attachments/hydraulics/planters/active_pneumatic_downforce_afc.html">attachment for field conversion</a>.</p>
       <h5>Set point row-unit downforce</h5>
       
       <p>On set point, the air compressor will be mounted on the outer hitch or frame assembly. Since the electric air compressor assembly is mounted on the outer hitch (as noted in the picture above) or frame, adjustments for row-unit downforce and related system pressures will be made electronically with the GreenStar display.</p>
       <p> </p>
       <p>When adjusting the amount of row-unit downforce using the GreenStar display, the operator will select the amount of downforce (kg [lb]) to be applied across the planter. Depending on the soil conditions at hand, the operator might need to adjust the relative amount of row-unit downforce being applied during the planting operation. The integrated pneumatic downforce controls within the GreenStar display will only allow for set-point operation and not automatic control as the planter is operating in different soil conditions. The pneumatic downforce system does not have the capability to automatically adjust downforce.</p>
       
       <p>Pneumatic downforce provides convenient, simple adjustment of downforce for the whole planter from one location. The amount of downforce applied is infinitely adjustable from 6.8 to 181.4 kg (15 to 400 lb). Pneumatic downforce provides more consistent downforce throughout the range of row-unit travel than mechanical spring downforce systems.<br><br>Features include:</p>
       <ul>
        <li>9.5-mm (3/8-in.) air delivery line instead of the 6.4-mm (1/4-in.) line used on model year 2010 and older planters.</li>
        <li>Air compressor assembly increased duty cycle. With this compressor, it provides a 47 percent increase in maximum air flow delivery compared to the prior air compressor.</li>
        <li>Pneumatic air bags with 9.5-mm (3/8-in.) air line inlets that have greater durability.</li>
       </ul>
       
       <p>Each row-unit has a single rubber air bag located between the parallel arms. The air bags are hooked in parallel so that air can be added or released from all rows at once from one location.</p>
       <p> </p>
       <p>The individual pneumatic downforce air bag assemblies, air compressor units, and 9.5-mm (3/8-in.) <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/seeding/attachments/placement/planters1/upgraded_pneumatic_downforce.html">delivery lines are also available as an attachment for field conversion</a>.</p>
       
       <p>An improved compressor is used to charge the pneumatic system. This compressor can be located on the planter frame or in the tractor cab if desired. A gauge at the compressor indicates the amount of downforce being applied.</p>
       <h5>Integrated pneumatic downforce system</h5>
       
       <p>The functional features of the integrated system are the same as the standard pneumatic system, explained above, with the addition of control through the GreenStar display.</p>
       <h5>Heavy-duty adjustable downforce springs</h5>
       
       <p>Planter row-unit downforce is an important factor to ensure consistent and proper depth control. The heavy-duty adjustable downforce feature provides up to 181.4 kg (400 lb) of downforce. There are four settings available to allow the operator to choose the amount of downforce required for the condition: 0 kg (0 lb), 56.7 kg (125 lb), 113.4 kg (250 lb), and 181.4 kg (400 lb).</p>
      </div>

Downforce system options

<div>
       
       <p>Easy Adjust row cleaner and coulter combo provides a pneumatic row tillage solution that is controlled from the seat of the tractor.</p>
       <p> </p>
       <p>Every decision to make an adjustment during spring planting reduces the acres planted per day and can increase or decrease profitability. An adjustment that can be overlooked is row cleaners due to planter size, difficulty to make the adjustment, and varying conditions across fields and time.</p>
       
       <p>With the Easy Adjust row cleaners on ExactEmerge™ planters, operators now have a pneumatic solution to make on-the-go adjustments that is controlled directly from the seat of the cab. They can be raised from the cab as needed with the push of a button for wet areas, waterways, or end rows. For growers using SeedStar 3 HP, the row cleaners are completely integrated into the John Deere GreenStar 3 2630 Display as well as the Gen 4 4600 CommandCenter display or 4640 Universal Display. For growers using SeedStar 4HP, a 4600 CommandCenter display or 4640 Universal Display is required.<br><br>The Easy Adjust row cleaners have the capability to save three presets for varying ground engagement based on field conditions. The system is controlled in three sections: at each wing as well as the center (frame or wheel) track rows. The pneumatic lines use air from the active pneumatic downforce compressor, requiring no additional compressor to be installed on the planter. The Easy Adjust row cleaners utilize down and up force air bags. The adjustable air pressure setting for each bag allows the operator to set the ride of the row cleaner depending on the field conditions and the desired results. Making these on-the-go adjustments from tractor cab increases productivity and performance during planting.<br><br>For Easy Adjust row cleaner performance upgrade kit options, see the <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/seeding/2022/other_supplemental/retrofit_kits.html">ordering guide</a>.<br><br>The row cleaner-only option utilizes parallel linkage to provide the floating action growers require in their fields. Parallel linkage allows for the unit to float up and down in the situation of hills or hard objects. The cleaner and coulter combo does not have parallel linkage, however, the row cleaners have floating rings installed to help provide the same benefits.<br><br>The row cleaners utilize the field-proven SharkTooth® design. Row cleaners play a major role in maximizing yield toward uniform emergence, reducing row-unit bounce, and maintaining proper depth. The Easy Adjust row cleaners provide growers with quick and stress-free solutions to customizing the planter in variable field conditions. They are available on most ExactEmerge and MaxEmerge 5e equipped planters.<br><br>SharkTooth is a trademark of Yetter Manufacturing Incorporated.</p>
      </div>

Easy Adjust row cleaners

<div>
       
       <p>Terraces or waterways are two of many field obstacles that make planting on a curve challenging. When planters utilize drive shafts, they are not able to control each individual row-unit; as a result, planting on a curve presents an issue of maintaining 100 percent population. Since the inside rows are moving slower than the outside rows, the inside rows will be over populating while the outside rows are under populating.</p>
       <p> </p>
       <p>With ExactEmerge™ planters and equipped MaxEmerge™ 5e planters, the curve compensation feature allows each row to receive an individual signal based on the speed at which the row-unit is moving, maintaining the correct population across the width of the planter. Without curve compensation, there could be as much as a 24 percent drop in population accuracy, which is equivalent to 8,600 seeds per acre when planting at 36,000 seeds per acre. Curve compensation measures acceleration within the main planter controller and utilizes speed inputs to ensure each row has the desired population accuracy.</p>
      </div>

Achieve accuracy with Curve Compensation

<div>
       
       <p>Crop yields have increased through the years along with the amount of residue left in the field after harvest. At the same time, tillage practices have changed, including different tillage operations which maintain large amounts of surface residue, and even no-till practices. Row cleaners are an essential tool in managing this increased amount of residue.</p>
       <p> </p>
       <p>John Deere seeding group offers a variety of row cleaner options to meet the needs of a producer's operation. Compatibility varies by model, row spacing, and other planter equipment.</p>
       <h5>Screw-adjust, unit-mounted row cleaner</h5>
       
       <p>The <a href="http://element-si-staging.azurewebsites.net/docs/sales/salesmanual/en_NA/seeding/2023/feature/placement/deereplanter_and_dbplanters/unit_mounted_row_cleaner.html">screw-adjust, unit-mounted row cleaner</a> is mounted directly to the face plate of the row-unit, placing the ground engaging components just in front of the row-unit opener blades and depth gauge wheels. This close proximity allows the gauge wheels to control the depth of the row cleaner as well as the row-unit. This compact design also allows greater compatibility with fertilizer openers and other planter attachments.</p>
       <p> </p>
       <p>SharkTooth® wheels are standard equipment on the unit-mounted row cleaner. The swept-tooth design of the wheel provides a clear path for the row-unit openers while resisting residue buildup on the wheel. The screw adjustment knob is accessible through the top of the parallel arms, providing convenient access for adjustments. The row cleaner can be adjusted in 1.6-mm (1/16-in.) increments, providing plenty of flexibility to meet the needs of changing conditions.</p>
       <h5>Floating row cleaner with unit-mounted coulter</h5>
       
       <p>The floating row cleaner allows a row cleaner to be used in conjunction with a unit-mounted coulter. This combination is often desired in heavy residue loads and reduced tillage planting conditions. The row cleaner provides a clear path for the row-unit, while the unit-mounted coulter helps penetrate tough soil conditions.</p>
       <p> </p>
       <p>Accommodating the unit-mounted coulter means the residue wheels are farther forward from the row-unit face plate than in the case of the screw-adjust row cleaner. To maintain performance, this row cleaner has the capability to float above a defined minimum depth.</p>
       <p> </p>
       <p>Standard depth-gauging bands on the wheels allow the row cleaner wheels to float independently of the row-unit openers, allowing both to perform in varying terrain. The unit may also be set in a fixed position by simply pinning through the bracket if desired. This row cleaner also features SharkTooth wheels as standard equipment.</p>
       <p> </p>
       <p>The floating row cleaner and unit-mounted coulters are available on many planters as factory-installed equipment.</p>
       
       <p><em>NOTE: Screw-adjust row cleaners are not compatible with MaxEmerge™ 5e row-units with long parallel arms.</em></p>
       <p> </p>
       <p><em>NOTE: DB models have the option for either unit-mounted coulter, screw-adjust row cleaners, or pneumatic row cleaners (only compatible with MaxEmerge 5e or equipped ExactEmerge™ models). The DB60T is only available with a less row cleaner option.</em></p>
       <p> </p>
       <p>SharkTooth is a trademark of Yetter Manufacturing, Inc.</p>
      </div>

Row cleaner options to meet residue management needs

<div>
       
       <p>When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.<br><br>John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.<br><br>With your permission, John Deere Connected Support:</p>
       <ul>
        <li>Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues</li>
        <li>Saves time by remotely viewing in-cab displays, reducing trips to the machine</li>
        <li>Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities</li>
        <li>Connects experts with the information needed to respond to downtime faster and prevent it altogether</li>
       </ul>
       <p>With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.</p>
      </div>

Specifications
Number of rows	32
Row spacing	76 cm30 in.
Row unit seed hoppers	CapacityVacuum meter: 2.2 L0.062 bu
Seed Meters	BaseVacuum
Number of rows	32
Row spacing	76 cm30 in.
Type	Wheel modules with rephasing hydraulic cylinders
Base	Center frame tires: 400/500-R22.5: 552 kPa5.5 bar (80 psi)Center frame tires: 600/50R22.5: 379 kPa3.8 bar (55 psi)14-ply Center frame tires: 31-13.5x15 621 kPa6.2 bar (90 psi)Center frame tires (DB74-DB88 Planters): 445/50R22.5: 522 kPa (5.5 bar) [80 psi]6-ply wing frame implement tires: 31-13.5x15: 152 kPa (1.5 bar) [22 psi]8-ply Wing frame skid steer tires: 31-13.5x16.5: 241 kPa (2.4 bar) [35 psi]
Type	ExactEmerge™ row unitsor MaxEmerge™ 5e row units
Opener	Tru-Vee double disk
Row unit seed hoppers	CapacityVacuum meter: 2.2 L0.062 bu
Base	Vacuum
Central Commodity System	Seed capacity3524 L100 buWith Refuge Plus option: 4405 L125 bu
Base	Electric motors: 56 V
Type	Automatic alternating or independent control
Base	SeedStar™ electronic system
Tank capacity	499 Imperial gal.2271 L600 U.S. gal.
Transport weight	Average empty weight: 16,057 kg35,400 lb
Recommended tractor horsepower	Minimum required on tractor with Category 4 drawbar: 223.7 kW300 hp
Recommended tractor hydraulics	Hydraulic oil pump required to operate electric drive planter: 227 L/min60 gpmTractor standby pressure: 15,500 kPa155 bar (2300 psi)Hydraulic System Working Pressure: 20,684 kPa207 bar (3000 psi)Hydraulic system burst pressure: 82,737 kPa827 bar (12,000 psi)