859MH Tracked Harvester
Model:
859MH Tracked Harvester
- Peak Power: 224 kW (300 hp) @ 1,900 rpm
- Max. Boom Reach: 9.91 m (32 ft. 6 in.)
- Tractive Effort: 373 kN (83,876 lbf)
Specifications | |
---|---|
Engine Manufacturer | John Deere |
Engine Model | 6090H |
Displacement, ltr (InchesÂł) | 9 (549) |
Rated Speed, rpm | 2000 |
Engine Output, kW (hp) | 213 (286) |
Engine Torque, Nm (lbf / ft) | 1270 (937) |
Carrier Rollers - Each Side | 2 |
Track Rollers - Each Side | 9 |
Track Shoe Width, mm (inches) | 610 (24) |
Height Over Cab, mm (ft/in) | 3920 (12 ft 10 in) |
Width, mm (ft/in) | 3330 (10 ft 11 in) |
Overall Track Length, mm (ft/in) | 4900 (16 ft 1 in) |
Track Length On Ground, mm (ft/in) | 3830 (12 ft 7 in) |
Tailswing Radius, mm (ft/in) | 1940 (6 ft 4 in) |
Ground Clearance, mm (ft/in) | 725 (2 ft 5 in) |
Superstructure Width, mm (ft/in) | 3150 (10 ft 4 in) |
Slewing Angle, Degrees | 360 |
Cab Leveling tilt (Forward), Degrees | 26 |
Cab Leveling tilt (Rear), Degrees | 7 |
Cab Leveling tilt (Side), ± Degrees | 7 |
Fuel Tank, ltr (gallons (US)) | 870 (230) |
Number of Alternators | 1 |
Alternator Output, Amp | 100 |
Slew Speed, rpm | 6.7 |
Travel Speed, kph (mph) | 3.6 (2.2) |
Reference Harvesting Head | Waratah HTH622B |
Felling Diameter, mm (inches) | 750 (29.5) |
Delimbing Diameter, mm (inches) | 640 (25.2) |
Delimbing Feed Rate, m/sec (ft/sec) | 5.7 (18.7) |
Cutting Radius - Maximum, mm (ft/in) | 8840 (29 ft ) |
Cutting Radius - Minimum, mm (ft/in) | 2710 (8 ft 11 in) |
Cutting Swath Horizontal, mm (ft/in) | 6130 (20 ft 1 in) |
System Voltage, V | 24 |
Main Pump | Variable Displacement Axial Piston |
Pump Flow, lt/min (gallons (US) / min) | 494 (131) |
Operating Weight, kg (lbs) | 37450 (82580) |
Weight - With Reference Head, kg (lbs) | 37450 (82580) |
Weight - Without Reference Head, kg (lbs) | 35260 (77750) |