Engine | TypePowerTech™ PSS 9.0LExhaust emission regulation compliancy - Final Tier 4 / Stage VDisplacement9 L549 cu in.ModelEurope: 6090HZ029North America: 6090HZ030CylindersInline 6 |
Fuel system | Common rail plus four valves |
Fuel tank capacity | 1,100 L290.6 U.S. gal. |
DEF tank capacity ( for FT4 or EU Stage V emission level) | 43 L11.4 U.S. gal. |
Fuel tank capacity | 1100 L290.6 U.S. gal. |
DEF tank capacity ( for FT4 or EU Stage V emission level) | 43 L11.4 U.S. gal. |
Manufacturer | John Deere |
Type | PowerTech™ PSS 9.0LExhaust emission regulation compliancy - Final Tier 4 / Stage V |
Model | Europe: 6090HZ029North America: 6090HZ030 |
Displacement | 9 L549 cu in. |
Cylinders | In line six |
Speed on road | 1400-2100 rpm |
Engine/ground speed management | Optional |
Fuel system | Common rail plus four valves |
Cooling system capacity | 82 L21.66 U.S. gal. |
Cooling fan drive | Direct |
Ground drive | Standard: Hydrostatic, 3-speed - manual shift with helical gearsEngine rpm on road: 1650 rpmOptional: ProDrive™, autoshift transmission, differential lock (automatic and manual), automatic wet brake systemEngine rpm on road: 1400-2100 rpm |
Hydraulics | Load sensing |
Crop harvesting unit | Harvest channel standard |
Crop flow components | Low-friction crop-flow concept |
Main clutch | Dry clutch |
Number of discs | One disc |
Main driveband | Reinforced with Kevlar inserts |
Belt tensioning | Active, hydraulic pressure |
Main driveband, polybelt belts | Five ribs |
Type/voltage | 12 V |
Batteries/battery quantity/capacity | 1 x 174 amp-hr |
Alternator | 200 amp |
Hydraulic system capacity | 50 L13.2 U.S. gal. |
Type | Standard: hydrostatic, 3-speed manual shiftOptional: ProDrive, autoshift transmission |
Differential lock | Manual or automatic (optional comes with ProDrive) |
Maximum transport speed | Hydrostatic transmission: 25 / 30 km/h15.5 / 18.6 mphProDrive transmission: 20 / 25 / 30 / 40 km/h12.4 / 15.5 / 18.6 / 24.9 mph |
Rear axle type | Hydro-mechanical 4WD |
Automatic wet brake system | Available with ProDrive transmission |
Engine speed management | Optional |
Tilt and extend steering column | Standard |
Air conditioning and heater | Standard - ClimaTrak |
Cool box | Optional |
Trainee seat | StandardLeather seat optional |
Hectare counter | Standard |
Operator information system | Cornerpost displayArmrest display (Touchscreen)Side rail display (Touchscreen) optional |
CAN bus electronics | Standard |
Operator's seat | Air-suspension seat optionalLeather seat optional |
Side window wiper | Rear and side window wiper optionalParallel-type windscreen wiper |
Electric adjust and heated | Optional on rear view mirrors |
Rearview mirrors | Standard |
Yield monitoring | Harvest Monitor™ optional |
Documentation | Harvest Doc™ optional |
Crop analysis | HarvestLab™ 3000 optional |
Length-of-cut control based on crop parameter | Infinitely variable length-of-cut (IVLOC™) standardAutoLOC™ optional with HarvestLab 3000 |
Assisted steering systems | AutoTrac or Manual RowSense optional |
Feed roll frame opening | Swing away, 37-45 degree (angle) |
Number | Four |
Metal detector | StandardStone detector is optional |
Width, front | 660 mm26 in. |
Standard feedroll drive | Hydro feedroll drive IVLOC standardInfinitely header drive speed standard |
Type | Dura-Drum™ cutterhead |
Cutterhead housing width | 686 mm27 in. |
Knife drum width | 680 mm26.8 in. |
Knife drum diameter | 668 mm26.3 in. |
Speed at rated engine speed | 1100 rpm |
Knife types available (crop) | Straight - grassCurved - corn |
Number of knives | 40 - 48 - 56 |
Shear bar, reversible | Grass, corn, or Dura Line Plus |
Shear bar adjust | Fine shearbar adjustQuick shearbar adjust |
Reverse rotation | Yes |
Automatic from cab | Yes, remote from cab |
Reverse drive | Standard |
Sharpening modes | Grinding and finishing |
Type | Premium KP (8100-8600)XStream KP (8300-8600) |
Quick-change | Quick kernel processor - swing in/swing out |
Quick KP removal | Optional: Crane with remote-controlled electric hoist |
Housing | Standard KP housing |
Lubrication | Grease |
Roll diameter | 240 mm9.45 in. |
Speed differential / Roll speed (lower) | 32 percentOptional 40 percent |
Sorghum, roll teeth number (speed differential) | 238 (32 percent) |
Weight | 320 kg145 lb |
Available KP rolls | Standard sawtoothDuraline sawtoothWhole crop |
Housing | Heavy duty housing with KP roll quick exchange system |
Lubrication | Pressurized oil |
Rotor diameter/housing width | Rotor diameter: 560 mm22.86 in.Housing width: 540 mm21.26 in. |
Number of blades | 10 |
Speed (option) | 1800 rpm |
Rotation, degrees | 210 degree (angle) |
Hydraulic height position | Hydraulic raise and lower standardAutomatic spout positioning optional |
Double-cap deflection | Standard |
Reach from center line (Optional) | 6 or 8 row: 4.73 m15.5 ft10 row: 5.87 m19.3 ft12 row: 6.71 m22 ft |
Rotary radiator screen cleaner | Standard |
Automatic lubrication system | Optional |
Engine oil and filter change duration | Plus-50™ II oil: 500 hoursOther oil: 250 hours |
With front tires | 710/70R42 |
With rear tires | 620/60R30 |
Transport length (without header) | 6.5 m21.4 ft |
Transport width (without header) | 3-3.5 m9.84-11.5 ft |
Transport height (to cab roof) | 3.89 m12.75 ft |
Working height (maximum) | Height to spout: 6.60 m21.65 ft |