<ul>
<li>Tool-free removal and attachment with just a few, simple steps</li>
<li>Frame design that allows for maximum maneuverability</li>
<li>Repositioned leveling links for better visibility</li>
<li>Automatic Mast Latch system for quick change from loader to three-point implements</li>
</ul>


680R Loader

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Construction

<ul>
<li>Large, easy-access step and hand brace</li>
<li>Upgraded valve provides smooth hydraulics for precise control</li>
<li>Available field-install thumb option</li>
<li>Stabilizer, boom and swing locks accessible from the operator’s seat</li>
</ul>


260B Backhoe

<ul>
<li>Net Power:  116&nbsp;kW (155&nbsp;hp) at 1,400&nbsp;rpm</li>
<li>Operating Weight:  18&nbsp;422&nbsp;kg&nbsp;(40,614&nbsp;lb.)</li>
<li>Heaped Capacity: 1.9 m<sup>3</sup> (2.4&nbsp;cu.&nbsp;yd.)</li>
<li>Breakout Force: 148&nbsp;kN (33,271&nbsp;lbf)</li>
</ul>


655K Crawler Loader

<ul>
<li>Net Power: 311 kW (417 hp) at 1,600 rpm</li>
<li>Bucket Capacity: 4.8–6.1 m3 (6.3–8.0 cu. yd.)</li>
<li>Operating Weight: 33,943– 34,777 kg (74,831–76,670 lb.)</li>
</ul>


844L Wheel Loader

<ul>
<li>Net Power: 39.6 kW (53 hp)</li>
<li>Max Digging Depth: 3.77 m (12 ft. 4 in.)</li>
<li>Operating Weight: 6180 kg (13,620<br />
lb.)</li>
</ul>


60G Compact Excavator

<ul>
<li>Compatible with the 1023E and 1025R</li>
<li>Parkable</li>
<li>570 pounds (259 kg) of lift capacity</li>
<li>71.2 in. (1,809 mm) of lift height</li>
</ul>


D120 Loader

<ul>
<li>Compatible with 4M and 4R Series Tractors</li>
<li>Rigid mounted with parking kit available</li>
<li>Easy maintenance points keeps you on the job</li>
<li>1,760 pounds (800 kg) lift capacity</li>
</ul>


400E Loader

<ul>
<li>Net Power: 123 kW (166 hp) at 1,700 rpm</li>
<li>Operating Weight: 13 844–13 879 kg (30,520–30,598 lb.) </li>
<li>Bucket Capacity: 1.9–4.0 m<sup>3</sup> (2.5–5.25 cu. yd.)</li>
</ul>


544 P-Tier Mid-Size Wheel Loader

<ul>
<li>Net Power: 73 kW (98 hp)</li>
<li>Max. Digging Depth: 6.03 m (19 ft. 9 in.)</li>
<li>Operating Weight: 13 407 kg (29,531 lb.)</li>
</ul>


130G Mid-Size Excavator

<ul>
<li>Net Power: 140 kW (188 hp)</li>
<li>Max. Digging Depth: 7.61 m (25 ft. 0 in.)</li>
<li>Operating Weight: 25 463 kg (56,100 lb.)</li>
</ul>


250G LC Mid-Size Excavator

<ul>
<li>Engine HP<sup>1</sup>: 539 Max / 490 hp Rated</li>
<li>e18™ PowerShift Transmission</li>
<li>Choice of three different cab and visibility packages</li>
<li>Cab Suspension
</li>
</ul>
<p style="font-size:10px"><sup>1</sup>Engine power PS (hp ISO) at max engine power speed (ECE-R120). John Deere Standard RES10080, SAE Standards J1995.</p>


9RX 490 Scraper Special

Front End Loaders For Tractors

640R Loader

<ul>
<li>Compatible with 2032R and 2038R tractors</li>
<li>Quik-Park&trade; mounting system for easy on, easy off in minutes</li>
<li>Optional single-point hydraulic coupler connects hydraulics with pull of a lever</li>
<li>Quik-Change&trade; Bucket System for fast and easy attachment changeovers</li>
<li>Mechanical Self-Leveling (MSL) Loader option with 1,377 lb (626 kg) lift capacity</li>
</ul>


220R Loader

<ul>
<li>Compatible with the 1023E, 1025R and 2025R tractors</li>
<li>Quik-Park stands for easy attachment and removal</li>
<li>up to 553 lb (251 kg) lift capacity</li>
<li>Mechanical Self-Leveling (MSL) Loader option with up to 726 lb (330 kg) lift capacity</li>
</ul>


120R Loader

<ul>
<li>Automatic Mast Latch for fast implement changeover</li>
<li>Repositioned leveling links for better visibility</li>
<li>Designed for maximum tractor maneuverability</li>
<li>Integrated stands for tool free attachment and removal</li>
</ul>


620R Loader

<ul>
<li>Compatible with 3025D, 3035D, 3043D, 3025E, 3032E, and 3038E</li>
<li>Curved boom design improves operator visibility to front implements</li>
<li>Larger knee plates for strength and durability without sacrificing compact stance</li>
<li>845 lbs (384 kg) of lift capacity</li>
<li>Mechanical Self-Leveling (MSL) Loader option with 1,283 lb (583 kg) lift capacity</li>
</ul>


300E Loader

<ul>
<li>Compatible with 4R Series Tractors and older 4 Series Tractors of similar size</li>
<li>Quik-Park™ loader mounting system for fast, easy attachment and removal</li>
<li>Quik-Change™ attachment carrier makes switching from chore to chore a snap</li>
<li>Optional skid steer attachment carrier</li>
</ul>


440R Loader

<ul>
<li>Superior strength and visibility</li>
<li>For heavy-duty chores</li>
<li>Parking stands are integrated on the loader</li>
</ul>


H310 Loader

<ul>
<li>Tool-free removal and attachment with just a few, simple steps</li>
<li>Frame design that allows for maximum maneuverability</li>
<li>Automatic Mast Latch system for quick change from loader to three-point implements</li>
<li>Repositioned leveling links for better visibility</li>
</ul>


660R Loader

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Landscaping and Grounds Care

<ul>
<li>20 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>Hammer blade option</li>
</ul>


R20 Flex Wing Rotary Cutter

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>New frontal suspension and swivel hitch options</li>
</ul>


R15 Flex Wing Rotary Cutter

<ul>
<li>Adjustable cutting height</li>
<li>Uses a heavy-duty gearbox with a rating of 65 hp</li>
<li>Compatible with any Category 1 3-point hitch</li>
</ul>


25A Flail Mower

<ul>
<li>Premium HVAC cab with light-stone interior</li>
<li>Cargo box power lift</li>
<li>LED headlights</li>
<li>Up to 4,000-lb towing capacity</li>
</ul>


XUV835R Premium Cab Crossover Utility Vehicle

<ul>
<li>Powerful diesel engine and ultimate HVAC cab with genuine leather seats</li>
<li>7-speaker infotainment system with touchscreen</li>
<li>Rear-facing camera and sliding rear window</li>
<li>Versatile Bumper Pro Brush Guard</li>
</ul>


XUV865R Signature Edition Crossover Utility Vehicle

<ul>
<li>Easy-to-maneuver</li>
<li>Adjustable cutting height</li>
<li>Balanced blade pan</li>
<li>Puncture-resistant rear tires&nbsp;</li>
</ul>


RC20 Series Rotary Cutters

Loaders

<ul>
<li>Net Peak Power: 77 kW (103 hp) at 1,600 rpm</li>
<li>Max Standard Dipperstick Digging Depth: 4.35 m (14 ft. 3 in.)&nbsp;</li>
<li>Operating Weight: 7,199 kg (15,872 lb.)</li>
</ul>


310SL Backhoe

<ul>
<li>Net Power: 48 kW (65 hp) @ 2,400 rpm</li>
<li>Operating Weight: 5796 kg (12,778 lb.)</li>
<li>Bucket Capacity: 0.8–1.6 m³ (1.0–2.1 cu. yd.)</li>
</ul>


304L Compact Wheel Loader

<p>Row crop tractors (140-410 HP), specialty tractors, 4WD track tractors, scraper systems, front end loaders and attachments.</p>


RCTR: Tractors and Loaders

<div>
       <h5>Time and cost savings with Loader Technology package preparation</h5>
       
       <p>The loader technology package prep provides the installed harness to further install a hardware bundle that has four features to make material handling easier and more efficient. The package is only for mid-model year 2022 6R 110 to 6R 250 Tractors when equipped with the electric joystick and mid- valves.</p>
       <p>Technology package hardware unlocks the following loader features when DWS option code is ordered with Loader Technology package prep:</p>
       <p> </p>
       <ul>
        <li>Dynamic Weighing System (DWS)</li>
        <li>Level to Horizon (LTH)</li>
        <li>Return to Position (RTP)</li>
        <li>Electronic self-leveling (ESL)</li>
        <li>Optional loader camera</li>
       </ul>
       <h5>Return to Position (RTP)</h5>
       
       <p>This feature moves the loader boom and bucket automatically to predefined positions. The operator can save two sets of boom height and bucket angles (A and B). With one short push or pull of the joystick, the loader automatically returns the boom and bucket to the desired position.</p>
       
       <p>Filling a manure spreader then only requires a few joystick movements and no manual controlling of heights and angles to avoid collisions:</p>
       <ol>
        <li>One joystick movement each for the boom and the bucket – loader simultaneously levels the grapple bucket and lowers the boom just above the ground.</li>
        <li>One joystick movement – loader raises the boom above the manure spreader.</li>
        <li>One joystick movement – loader empties the manure fork.</li>
       </ol>
       <p> </p>
       <p>When more positions are needed, such as loading bales in two layers on a trailer or including transport heights and angles in the positioning feature, the second set of positions (b) can be used. All values and settings are shown in the main screen of the tractor, including the current bucket angle.</p>
       <p> </p>
       <p>RTP can easily be switched off if manual operation is preferred.</p>
       <h5>Level to Horizon (LTH) </h5>
       
       <p>This feature levels the attachment parallel to the ground, while conventional loader leveling systems maintain the same angle versus the tractor. This means that when riding in hilly conditions or over curbs on the farm, the pallet fork, bucket, or other attachment is actively moved into a horizontal position. If this behavior is not desired by the operator, it can be turned off in the tractor display. The attachment is then leveled to the tractor if equipped with a leveling feature such as mechanical self-leveling (MSL).</p>
       <h5>Dynamic Weighing System (DWS), if equipped (code 9661)</h5>
       
       <p>The DWS feature displays the current weight loaded in the attachment, such as a bucket. The tractor does not need to stop for weighing, allowing the operator to fill up a bucket to the required target weight without interrupting for a separate weighing cycle. It also allows the operator to enter target weights per component, such as silage, forage, or soy. This provides an instant overview of needed ingredients for feeding wagons and other loading tasks. If starting a new silage pit with changed nutrition value, the target value for this single component is easily adjustable.</p>
       <p> </p>
       <p>A bar diagram and displayed values clearly show how much weight of the current component is still needed to achieve its target weight.</p>
       <p> </p>
       <p>The operator can easily switch between the different components. This enables an improved way of filling feeder wagons, unlocking unexpected fuel saving potential. Currently, operators fill one component after the other into the feeding wagon to compare the sum of this component with a memorized or written value. Then, the next component is added to again compare its component sum with the scale on the feeder wagon.</p>
       <p> </p>
       <p>With DWS, operators can fill forage, silage, and more in mixed sequence, as it saves the subtotal of each component individually and not just the total sum. This allows the operator to change the material with each bucket, providing already mixed content in the wagon without running it.</p>
       <p> </p>
       <p>The weighing system includes a counter for every loading cycle. The tractor counts with every loading cycle, confirmed by simply pushing a button integrated into the loader joystick. The weighing system even registers multiple units. For example, when handling two bales in one grapple, the tractor can count two bales with every loading cycle.</p>
       <p> </p>
       <p>Liquid goods in containers can also be weighed. The container with the liquids can be weighed before and after the unloading cycle; the difference is added to the respective weighing cycle. This should be done with a leveled pallet fork or large bag, which is possible with DWS as it does not require a certain bucket angle for the weighing process.</p>
       <h5>Electronic self-leveling (ESL)</h5>
       
       <p>ESL maintains bucket positioning in any range of the boom. It can be easily activated and deactivated from the run pages.</p>
       <h5>Benefits</h5>
       
       <ul>
        <li>Faster and easier loading of goods with RTP</li>
        <li>No manual controlling of heights and angles to avoid trailers, sheds, etc.</li>
        <li>Weighing on the go without the time-consuming need to stop and perform a weighing cycle for every bucket</li>
        <li>No time lost for returning excessive load from mixer wagons</li>
        <li>No effort to rewrite the target weight of all individual components when changing silage pits with a different nutrition value or varying herd size</li>
        <li>No need to purchase a feeder wagon scale</li>
        <li>Fast filling of target weight in the bucket without interrupting to verify the current weight</li>
        <li>Automatic bale counter versus paper notes in the cab</li>
        <li>Can weigh liquids and even partial loads on pallets or in containers and buckets</li>
        <li>Avoid spilling goods or transport multiple bales without dropping them with the LTH feature</li>
       </ul>
       <h5>Loader camera option when ordered with Loader Technology package (code 9662)</h5>
       
       <p>The loader camera provides visibility to the loader carrier and surroundings. The hooks of the carrier are visible to facilitate connecting attachments. When working with pallet forks, the fork tips are visible to assist picking up pallets with ease. The video image is shown in the built-in display of the 6R Tractor.</p>
       
       <p>The camera is factory-installed in the loader factory; the wiring harness is protected inside the boom. The camera angle can be adjusted if needed. It is possible that a different position of the camera is desired, such as showing the contents of a bucket or the side of a snow blade. For such unique desires, spare cable length is available to enable customized camera positions.</p>
       <p> </p>
       <p><strong>Benefits</strong></p>
       <ul>
        <li>Fast connection of attachments</li>
        <li>No damage to pallets and goods loaded on forks and spears</li>
        <li>Possibility for customized camera position</li>
       </ul>
      </div>

Loader Technology package prep

<div>
       
       <p>The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.</p>
       <p> </p>
       <p><em>NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.</em></p>
       
       <p><a href="https://johndeeredealers.hosted.panopto.com/Panopto/Pages/Viewer.aspx?id=626b3d1b-50c8-4dc1-b795-aad200e28f29">R-Series Loader attach and detach instruction video</a></p>
      </div>

Single-point hydraulic connection to save time

<div>
       
       <p>The R-Series Loaders are designed to route the oil lines and hydraulic lines through the boom arm and the torque tube. This internal routing ensures better protection of the lines from external damage and improves the overall appearance of the loader.</p>
       
      </div>

Improve appearance and reduce damage with concealed oil lines

<div>
       
       <p>R-Series Loaders are even easier to attach and detach due to the automatic mast latch system. This feature provides efficiency to operations that require frequent loader parking. The automatic mast latch system is a mechanical lever that allows operators to remove or attach the loader with one trip out of the cab. The ease and convenience provided by the automatic mast latch system provides improvement to operation uptime.</p>
       
       <p><a href="https://johndeeredealers.hosted.panopto.com/Panopto/Pages/Viewer.aspx?id=626b3d1b-50c8-4dc1-b795-aad200e28f29">R-Series Loader attach and detach instruction video</a></p>
      </div>

Easy loader removal using automatic mast latch

<div>
       
       <p>The R-Series Loaders come equipped with a hydraulic shut-off valve to improve serviceability. When conducting brief service to the loader, close the hydraulic shut-off valve to ensure the loader does not move while operating under the equipment. This feature promotes a safe way to conduct brief maintenance without having to use support stands or removing the loader completely.</p>
      </div>

Easy service with boom lockout

<div>
       
       <p>The MSL R-Series Loaders utilize a false rod cylinder to improve bucket performance. This bucket cylinder is designed with a smaller displacement of oil required on the head end of the cylinder, which allows the cylinder to function more quickly, decreasing operation cycle time. With the false rod cylinder design, loader applications can work more quickly and efficiently.</p>
       
      </div>

Specifications
Maximum lift height (A)	4480 mm176 in.
Lift capacity at full height	Measured at pivot (U)2453 kg5408 lb
Boom breakout force	Measured at pivot (Y)3411 kgf7520 lbf
Bucket rollback force capacity	At ground-level line (ZZ)4336 kgf9559 lbf
Clearance at full height - bucket dumped (C)	3465 mm136 in.
Dump angle, degrees (E)	60 degree (angle)
Rollback angle, degrees (G)	48 degree (angle)
Model	6175R/M, 6195R/M, 6215R
Front tire	600/70R28
Rear tire	650/85R38
Front axle configuration	MFWD
Wheelbase	2800 mm110 in.
Pump capacity	114 L/min30.1 gpm
Rated pressure	200 bar2900 psi
Base weight	1808.2 kg
Leveling configuration	Mechanical Self Leveling (MSL)
Bucket used	Heavy-duty grapple 2450 mmHeavy-duty grapple 96 in.
Bucket weight	375 kg826 lb
Lift capacity at full height	Measured at pivot (U)2453 kg5408 lbMeasured at 800 mm ahead of pivot (V)2431 kg5359 lb
Lift capacity at 59 in. (1500 mm)	Measured at pivot (W)2989 kg6590 lbMeasured at 800 mm ahead of pivot (X)2821 kg6219 lb
Boom breakout force	Measured at pivot (Y)3411 kgf7520 lbfMeasured at 800 mm ahead of pivot (Z)3001 kgf6616 lbf
Bucket rollback force capacity	At maximum height (VV)3117 kgf6872 lbfAt 59-in. (1500-mm) lift height (XX)4486 kgf9890 lbfAt ground-level line (ZZ)4336 kgf9559 lbf
Dimensions	Maximum lift height (A)4480 mm176 in.At full height - bucket level(B)4240 mm167 in.At full height - bucket dumped (C)3465 mm136 in.
Overall length (I+F), ft (m)	5.5 m17.9 ft
Digging depth (H)	96 mm5 in.
Reach	At maximum height (D)1346 mm53 in.At ground level - bucket level (F)2931 mm115 in.
Bucket angle	Dump angle, degrees (E)60 degree (angle)Rollback angle, degrees (G)48 degree (angle)Dump angle, ground117 degree (angle)
Cycle times	Loader raise, seconds4.19 secondsLoader lower, seconds2.89 secondsBucket dump, seconds1.81 secondsBucket rollback, seconds1.81 seconds