- Standard four-wheel drive(4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- Category 1 3-pt hitch compatible with dozens of implements
Specifications | |
---|---|
Engine power (gross) | 22.9 kW31.2 hp |
Power take-off (PTO) power | 18.6 kW25 hp |
Steering hydraulics | 15 L/min4 gpm |
Implement hydraulics | 20.2 L/min5.3 gpm |
Hitch type | Category 1 |
Lift capacity, 24-in. behind link arms | 615.1 kg1356 lb |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Optional |
Approximate shipping weight (open-station; cab) | 1007.9 kg2222 lb |
Wheelbase | 159.5 cm62.8 in. |
Family | EYDXL1.64NDAFYDXL1.64NDAGYDXL1.64NDA |
Manufacturer | Yanmar |
Engine model | 3TNV88C-NJT |
Engine power (gross) | 22.9 kW31.2 hp |
Power take-off (PTO) power | 18.6 kW25 hp |
Rated engine speed | 2500 rpm |
Type | Diesel |
Injection pump type | High pressure common rail direct injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | 3 / 1.64 L3 / 100.2 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 88 x 90 mm3.46 x 3.54 in. |
Compression ratio | 19.1:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 87 Nm64.2 lb-ft |
Fuel tank capacity | 28.5 L7.5 U.S. gal. |
Battery size | 500 CCA |
Alternator (12-V) | 55 amp |
Starter size | 1.4 kW1.9 hp |
Type | High pressure common rail direct injection |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Left-hand reverser | No |
Final drive | Bull Gear |
Brakes | Wet disc |
Steering | Power steering |
Axle capacity | Front798 kg1760 lbRear1197 kg2640 lb |
Creeper | No |
Cruise control | Optional |
Differential lock | Yes |
Type | Open center |
Pump rated output | Steering15 L/min4 gpmImplement20.2 L/min5.3 gpm35.2 L/min9.3 gpm |
Pump type | Dual gear |
Maximum operating pressure | 172.4 bar2500 psi |
Draft control sensing | Position control |
Remote control valves available | Up to two (optional) |
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 615.1 kg1356 lb |
Standard | 540 rpm at 2500 rpm |
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Crankcase with filter | 4.5 L4.8 qt |
Type | Bull Gear |
Rollover protective structure | TypeFoldableASABE S478 |
Platform - flat/straddle | Semi-flat |
Gear shift location - console/floor | Left-hand side |
Wheelbase | 159.5 cm62.8 in. |
Front axle clearance | 36.3 cm14.3 in. |
Turning radius without brakes | 2.9 m9.4 ft |
Approximate shipping weight (open-station; cab) | 1007.9 kg2222 lb |
Front | Farm - 7-14Turf - 27x8.5-15R4 - 25x8.5-14R4 - 27x8.5-15 |
Rear | Farm - 11.2-24Turf - 41x14-20R4 - 15-19.5R4 - 43x16-20 |