2730 Combination Ripper

Model:

Adjust depth in six seconds on the go
In-cab control of each functional area
1/10th-in. (2.5-mm) accuracy
Expanded tractor compatibility

Specifications
Working width	Option 1: 4.3 m14 ftOption 2: 5.5 m18 ftOption 3: 5.5 mOption 4: 6.7 m22 ftOption 5: 7.9 m26 ft
Transport width	Option 1: Individual blades: 6.1 m 19.9 ftDisk gangs: 5.7 m 18.8 ftOption 2: Individual blades: 6.9 m 22.5 ftDisk gangs: 6.9 m 22.5 ftOption 3: Individual blades: 5.7 m 18.8 ftDisk gangs: 5.8 m 19.1 ftOption 4: Individual blades: 5.6 m 18.3 ftDisk gangs: 5.7 m 18.7 ftOption 5: Individual blades: 5.6 m 18.3 ftDisk gangs: 5.6 m 18.3 ft
Maximum operating depth	40.6 cm16 in.
Operating speed	8-11.3 km/h5-7 mph
Horsepower required per standard	25.1-41 kW34-55 hp
Standards	Spacing61 cm24 in.
Configuration	Disk - Disk - Ripper - Closing Disk - Finishing Attachment
Option 1	Rigid 7-standard on spacing of 61 cm24 in.
Option 2	Rigid 9-standard on spacing of 61 cm24 in.
Option 3	Folding 9-standard on spacing of 61 cm24 in.
Option 4	Folding 11-standard on spacing of 61 cm24 in.
Option 5	Folding 13-standard on spacing of 61 cm24 in.
Option 1	4.3 m14 ft
Option 2	5.5 m18 ft
Option 3	5.5 m18 ft
Option 4	6.7 m22 ft
Option 5	7.9 m26 ft
Option 1	Individual blades: 6.1 m19.9 ftDisk gangs: 5.7 m18.8 ft
Option 2	Individual blades: 6.9 m22.5 ftDisk gangs: 6.9 m
Option 3	Individual blades: 5.7 m18.8 ftDisk gangs: 5.8 m19.1 ft
Option 4	Individual blades: 5.6 m18.3 ftDisk gangs: 5.7 m18.7 ft
Option 5	Individual blades: 5.6 m18.3 ftDisk gangs: 5.6 m
Option 1	Single-point crank
Option 2	TruSet™ tillage
Option 1	4 SCVs (depth control, front disk, rear conditioner, optional rolling baskets) at 17,237 kPa2,500 psifor optimum raise times
Option 2	5 SCVs (depth control, front disk, rear conditioner, wingfold, optional rolling baskets) at 17,237 kPa2,500 psifor optimum raise times
Design	Single tube
Fore-aft adjustment	Hitch turnbuckle
Spacing	61 cm24 in.
Trip force	Cushion-trip standard: 1,859.7 kg4,100 lb
Trip height	Shear bolt protected above: 33 cm13 in.
Type	Parabolic with or without wear shins, straight with wear shins
Type	Wingless, LaserRip™ II points: 12.7 cm5 in.17.8 cm7 in.25.4 cm10 in.
Coverboards	On parabolic standards: 10.2 cm4 in.15.2 cm6 in.20.3 cm8 in.
Description	X-type configuration at front of tool
Depth control	TruSet in-cab controlsSingle-point depth control
Maximum depth	20.3 cm8 in.
Type of standard	C-spring
Base equipment blades	Solid spherical low-concavity disk blades: 660x6 mm26x0.25 in.
Blade spacing	Individual: 45.7 cm18 in.Effective - 22.9 cm9 in.Disk gang: 27.9 cm11 in.Effective: 14 cm5.5 in.
Front frame angle	Fixed: 18 degree (angle)
Rear frame angle	Fixed: 18 degree (angle)
Bearings	Sealed, maintenance-free
Scraper	Heavy-duty floating combination scraper (base option)
Description	Solid-spherical low concavity closing disks (notched optional)
Adjustments	TruSet in-cab controlsMechanical
Base equipment blades	Individual dual mount: 45.7 cm18 in.
Bearings	Sealed, maintenance-free
Option 1	Hydraulically adjustable finishing attachmentsKnife-edge rolling basketRound-bar rolling basketCoil-tine harrow