<ul>
<li>Large, easy-access step and hand brace</li>
<li>Upgraded valve provides smooth hydraulics for precise control</li>
<li>Available field-install thumb option</li>
<li>Stabilizer, boom and swing locks accessible from the operator’s seat</li>
</ul>


260B Backhoe

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Attachments Accessories and Implements

<ul>
<li>Heavy-duty wear shields for added gear case protection</li>
<li>Rotor is helical shaped for higher efficiency</li>
<li>Skid shoes control depth</li>
<li>Category 2 quick hitch compatible</li>
</ul>


RT22 Series Rotary Tillers

<ul>
<li>High tensile, heavy-gauge steel frame</li>
<li>Tine position is adjustable. No tools required</li>
</ul>


AP12D Pallet Fork

<ul>
<li>Operating Width: 50 In.</li>
<li>7 tines at 1.25 In. diameter solid round steel </li>
<li>Multiple working widths to match tractor requirements</li>
<li>Increased uptime with quick-change capability&nbsp;</li>
</ul>


AM20 Series Manure Fork

<ul>
<li>Replaceable and adjustable ripper shanks</li>
<li>iMatchTM compatible</li>
<li>Reversible blade</li>
<li>Fixed tailgate</li>
</ul>


BB50L Series Box Blades

GA21E Loader Carrier Adapter

Backhoes for Compact and Utility Tractors

<ul>
<li>Full 180-degree swing provides increased productivity</li>
<li>Quik-Tatch mounting for quick and easy mounting and dismounting</li>
<li>Comfortable operator&#8217;s area for increased productivity</li>
</ul>


595 Backhoe

<ul>
<li>Stabilizers, boom and swing locks accessible from the operator’s seat</li>
<li>Large, easy-access step and hand brace</li>
<li>Upgraded valve provides smooth hydraulics for precise control</li>
<li>Available field-install thumb option</li>
</ul>


370B Backhoe

<ul>
<li>Valve spools have machined-metering grooves to allow smooth operation and precise control of several functions</li>
<li>Improved feel and feathering capabilities</li>
<li>Strong sub-frame to ensure the tractor frame can handle the forces created from digging and transporting</li>
</ul>


375A Backhoe

<ul>
<li>The exclusive rockshaft assist (RSA) mounting system makes hooking up the backhoe simple and quick.</li>
<li>Unique 4-point quick-attach system allows you to install the backhoe from the seat.</li>
<li>The RSA design positions the backhoe closer to the tractor.</li>
</ul>


485 Backhoe

<ul>
<li>Controls are located on the tower, which allows easier access to the operator station</li>
<li>A curved power boom gives you a better view of the digging area</li>
<li>Seat-locking mechanism keeps the seat out of the way when the backhoe is not in use</li>
<li>Sturdy grab handle on the control tower ensures ease of entering and exiting the tractor</li>
</ul>


485A Backhoe

<ul>
<li>Valve spools have machined-metering grooves to allow smooth operation and precise control of several functions</li>
<li>Improved feel and feathering capabilities</li>
<li>Strong subframe to ensure the tractor frame can handle the forces created from digging and transporting</li>
</ul>


385A Backhoe

Construction

<ul>
<li>Net Power:  116&nbsp;kW (155&nbsp;hp) at 1,400&nbsp;rpm</li>
<li>Operating Weight:  18&nbsp;422&nbsp;kg&nbsp;(40,614&nbsp;lb.)</li>
<li>Heaped Capacity: 1.9 m<sup>3</sup> (2.4&nbsp;cu.&nbsp;yd.)</li>
<li>Breakout Force: 148&nbsp;kN (33,271&nbsp;lbf)</li>
</ul>


655K Crawler Loader

<ul>
<li>Net Power: 311 kW (417 hp) at 1,600 rpm</li>
<li>Bucket Capacity: 4.8–6.1 m3 (6.3–8.0 cu. yd.)</li>
<li>Operating Weight: 33,943– 34,777 kg (74,831–76,670 lb.)</li>
</ul>


844L Wheel Loader

<ul>
<li>Net Power: 39.6 kW (53 hp)</li>
<li>Max Digging Depth: 3.77 m (12 ft. 4 in.)</li>
<li>Operating Weight: 6180 kg (13,620<br />
lb.)</li>
</ul>


60G Compact Excavator

<ul>
<li>Compatible with the 1023E and 1025R</li>
<li>Parkable</li>
<li>570 pounds (259 kg) of lift capacity</li>
<li>71.2 in. (1,809 mm) of lift height</li>
</ul>


D120 Loader

<ul>
<li>Compatible with 4M and 4R Series Tractors</li>
<li>Rigid mounted with parking kit available</li>
<li>Easy maintenance points keeps you on the job</li>
<li>1,760 pounds (800 kg) lift capacity</li>
</ul>


400E Loader

<ul>
<li>Net Power: 123 kW (166 hp) at 1,700 rpm</li>
<li>Operating Weight: 13 844–13 879 kg (30,520–30,598 lb.) </li>
<li>Bucket Capacity: 1.9–4.0 m<sup>3</sup> (2.5–5.25 cu. yd.)</li>
</ul>


544 P-Tier Mid-Size Wheel Loader

<ul>
<li>Net Power: 73 kW (98 hp)</li>
<li>Max. Digging Depth: 6.03 m (19 ft. 9 in.)</li>
<li>Operating Weight: 13 407 kg (29,531 lb.)</li>
</ul>


130G Mid-Size Excavator

<ul>
<li>Net Power: 140 kW (188 hp)</li>
<li>Max. Digging Depth: 7.61 m (25 ft. 0 in.)</li>
<li>Operating Weight: 25 463 kg (56,100 lb.)</li>
</ul>


250G LC Mid-Size Excavator

<ul>
<li>Engine HP<sup>1</sup>: 539 Max / 490 hp Rated</li>
<li>e18™ PowerShift Transmission</li>
<li>Choice of three different cab and visibility packages</li>
<li>Cab Suspension
</li>
</ul>
<p style="font-size:10px"><sup>1</sup>Engine power PS (hp ISO) at max engine power speed (ECE-R120). John Deere Standard RES10080, SAE Standards J1995.</p>


9RX 490 Scraper Special

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Landscaping and Grounds Care

<ul>
<li>20 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>Hammer blade option</li>
</ul>


R20 Flex Wing Rotary Cutter

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>New frontal suspension and swivel hitch options</li>
</ul>


R15 Flex Wing Rotary Cutter

<ul>
<li>Adjustable cutting height</li>
<li>Uses a heavy-duty gearbox with a rating of 65 hp</li>
<li>Compatible with any Category 1 3-point hitch</li>
</ul>


25A Flail Mower

<ul>
<li>Premium HVAC cab with light-stone interior</li>
<li>Cargo box power lift</li>
<li>LED headlights</li>
<li>Up to 4,000-lb towing capacity</li>
</ul>


XUV835R Premium Cab Crossover Utility Vehicle

<ul>
<li>Powerful diesel engine and ultimate HVAC cab with genuine leather seats</li>
<li>7-speaker infotainment system with touchscreen</li>
<li>Rear-facing camera and sliding rear window</li>
<li>Versatile Bumper Pro Brush Guard</li>
</ul>


XUV865R Signature Edition Crossover Utility Vehicle

<ul>
<li>Easy-to-maneuver</li>
<li>Adjustable cutting height</li>
<li>Balanced blade pan</li>
<li>Puncture-resistant rear tires&nbsp;</li>
</ul>


RC20 Series Rotary Cutters

Lawn and Garden

<ul>
<li>25.5-hp (19.0 kW)* iTorque™ Power System</li>
<li>48-in. (122 cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit with one-touch technology</li>
<li>Electronic throttle control and power two-wheel steer</li>
<li>4 year/500 hour bumper-to-bumper warranty</li>
</ul>


X590 Lawn Tractor with 48-in. Deck

<div>
       
       <p>The 260B Backhoe was designed to have best-in-class features priced competitively with the various backhoes in its class in the marketplace. Competitive units were tested and benchmarked to ensure that John Deere provided the right product at the right price.</p>
       <p> </p>
       <p>The following list is a high-level overview of the features that are discussed throughout this content:</p>
       <ul>
        <li><p>Mid-mower deck compatible to allow for compounding of equipment to save operator's time</p></li>
        <li><p>Durable subframe, which gives strength and rigidity to the tractor frame and transmission</p></li>
        <li><p>Protective rubber boots on backhoe controls</p></li>
        <li><p>Tool-free installation/removal in a matter of minutes (once initially installed)</p></li>
        <li><p>20-cm (8-in.), 31-cm (12-in.), and 41-cm (16-in.) trenching bucket choices with bolt-on, replaceable digging teeth, as well as a ripper option</p></li>
        <li><p>Optional kits such as rubber street pads for stabilizer feet</p></li>
        <li><p>Optional mechanical and hydraulic backhoe thumb available to lift heavy logs and piles of brush</p></li>
       </ul>
       
      </div>

260B Backhoe performance overview

<div>
       
       <p>The 260B Backhoe has been designed with maximum operator comfort in mind. The features listed below will keep the operator comfortable all day long when working on various projects.</p>
       <ul>
        <li>A strong 3-point stance can be maintained when mounting and dismounting the backhoe using the rollover protective structure (ROPS) grab handle, the console grab handle, and the large boarding step mounted to the stabilizer arm.</li>
       </ul>
       
       <ul>
        <li>High-back seat provides more operator comfort during longer work hours.</li>
       </ul>
       
       <ul>
        <li>Stabilizers, boom and swing locks are accessible from the operator’s seat and have a built-in storage location when the backhoe is in use.</li>
        <li>Operator platform with non-slip grips are provided.</li>
        <li>All controls are in an ergonomically comfortable position and are easily reachable from within the operator platform when in the backhoe position.</li>
       </ul>
      </div>

Operator comfort

<div>
       
       
       <p>The 260B Backhoe is designed so the backhoe can be removed in under 5 minutes with no tools needed (once initially installed). Instructions are also conveniently placed on the rear of the backhoe to assist with installing and removing the backhoe.  The instructions below are an abbreviated version of what can be found in the operator's manual for installation and removal.</p>
       <p> </p>
       <p><em>NOTE: The instructions below are for reference only and should not be used for actual installing and removing the backhoe. The operator's manual gives a more complete and proper set of instructions.</em></p>
       <h5>Installation</h5>
       
       <ol>
        <li>
         <div>
          Back up tractor to within 20 cm (8 in.) from backhoe
         </div></li>
        <li>
         <div>
          Park tractor
         </div></li>
        <li>Connect power beyond system</li>
        <li>
         <div>
          Remove backhoe boom-lock pin
         </div></li>
        <li>
         <div>
          Back tractor closer to backhoe and use backhoe control levers to align backhoe frame with backhoe mounts on tractor
         </div>
         <ul>
          <li>
           <div>
            Use stabilizer controls to raise and lower stabilizers as needed to position notches in backhoe frame above mount hooks
           </div></li>
          <li>
           <div>
            Use stabilizers to lower hooks on notches on the back of tractor
           </div></li>
          <li>
           <div>
            Use boom control to raise boom into back of tractor and install pins to secure backhoe to tractor
           </div></li>
         </ul></li>
        <li>Use pins to secure backhoe to tractor</li>
        <li>Machine is now ready for use</li>
       </ol>
       <h5>Removal</h5>
       
       <ol>
        <li>
         <div>
          Lower stabilizers to a few inches from the ground
         </div></li>
        <li>
         <div>
          Center boom and install swing-locking pin
         </div></li>
        <li>
         <div>
          Remove boom-locking pin if installed
         </div></li>
        <li>
         <div>
          Extend dipper stick and lower boom
         </div></li>
        <li>
         <div>
          Rotate bucket until top edge is parallel with ground
         </div></li>
        <li>
         <div>
          Use boom control lever to lower and place slight down pressure on backhoe
         </div></li>
        <li>
         <div>
          Remove pins from backhoe mounts
         </div></li>
        <li>
         <div>
          Use backhoe controls to lower backhoe toward the ground
         </div></li>
        <li>
         <div>
          Use stabilizer controls to lift backhoe off lower mounting notches
         </div></li>
        <li>
         <div>
          Lower backhoe to ground
         </div></li>
        <li>
         <div>
          Disconnect hydraulic hoses and close connection on the tractor and backhoe side
         </div></li>
        <li>
         <div>
          Drive away for tractor use
         </div></li>
       </ol>
       <h5>Change between 3-point hitch and backhoe</h5>
       
       <p>Removal of the 3-point hitch components is required for the 260B Backhoe installation. The entire 3-point hitch is easily removed. No special tools or adjustments are needed.</p>
      </div>

Easy installation and removal

<div>
       <h5>Subframe</h5>
       
       <p>The subframe provides strength to the tractor frame and transmission housing to ensure the integrity of the tractor is not compromised by the forces generated by the backhoe.</p>
       <p> </p>
       <p>The subframe is fully mid-mower deck compatible, regardless of which mower lift system is used. Please see that section of the Sales Manual for more details.</p>
       <p> </p>
       <p><em>NOTE: Tire chains are not compatible with backhoe subframe installed.</em></p>
       <h5>Grab handles</h5>
       
       <p>Grab handles provide the operator with extra support when getting on and off the backhoe.</p>
       <h5>Power beyond hydraulics</h5>
       
       <p>Power beyond hydraulics are required on the tractor to run the 260B Backhoe as the kit provides continuous flow to the backhoe.</p>
       <p> </p>
       <p>The power beyond kit for the tractor is not included in the sub-frame attachment and needs to be ordered separately.</p>
      </div>

Subframe and power beyond hydraulics for 260B Backhoe

<div>
       
       <p>The 260B Backhoe uses two different pins for locking out the swing frame and boom for safe transportation or storage. These pins can be quickly removed and stored in the operator platform so they are not accidentally misplaced while using the backhoe.</p>
       
       <p>The 260B Backhoe has a ramp angle of 20 degrees, which allows for easy transportation on most trailers. This level of ramp angle also makes for better maneuverability across land that is uneven such as a ditch or trench.</p>
       <p> </p>
       <p>Note the line that moves up from the low point of the boom and how it is in line with the bucket when in the storage position. Compared to the competitive units that are in the marketplace, the transport configuration of the 260B Backhoe allows the backhoe to not have to move when going through a ditch or other uneven terrain.</p>
      </div>

Easy and convenient transportation

<div>
       
       <p>The 260B Backhoe is fully mid-mower deck compatible. The sub-frame for the backhoe will not interfere with the mower or mower deck linkage, regardless of which mower deck lift system is used.</p>
       <p> </p>
       <p>This feature keeps operators more productive as the mid-mower deck does not have to be removed in order to go out and do backhoe work. It is not recommended to use the mower deck with the backhoe installed due to the extra ground compaction and length of the tractor.</p>
       <p> </p>
       <p>The mechanical mower lift linkage will allow the mower to be raised and lowered with the 3-point hitch removed and the 260B Backhoe attached.</p>
      </div>

Mid-mower compatible

<div>
       
       <p>The boom and dipper are designed with the strength to handle all the necessary loads this backhoe can generate. The boom, dipper, and bucket cylinders are run externally on the 260B Backhoe. This provides easy access for servicing and maintenance.</p>
       <p> </p>
       <p>The fully enclosed boom on the 260B Backhoe measures a full 16.5 cm (6.5 in.) at the base and the dipper stick measures 13.9 cm (5.5 in.) at its widest point. These components are larger than competitive backhoes, which gives the 260B Backhoe a more durable structure and a bigger, heavy-duty appearance.</p>
       <p> </p>
       <p>The 260B Backhoe was designed with a continuous boom structure rather than a multiple-piece boom that is welded together with side plates some competitors use. This continuous boom provides a more rigid, stronger structure with less weld points that could potentially fail.</p>
      </div>

Enclosed boom and dipper

<div>
       
       <p>All cylinders on the 260B Backhoe are fully serviceable; should there be any problems, the cylinders can be taken apart and rebuilt without having to replace the whole cylinder. This saves the operator money should they damage a cylinder through improper removal of concrete, rocks, or tree roots. The boom and dipper cylinders are equipped with circuit relief to protect the cylinder rods during these high-stress activities.</p>
       <p> </p>
       <p>The internal seals on these cylinders are the same high-quality, durable seals that are used on some of the larger backhoes available from John Deere.</p>
       <p> </p>
       <p>The boom cylinder on the 260B Backhoe is designed with an internal cushion to ensure the cylinder does not come to an abrupt stop at the end of the stroke. This feature is appreciated by novice operators learning to use their backhoe or for the experienced when working in and around delicate surroundings, such as a fence or landscaping.</p>
      </div>

Serviceable cylinders

<div>
       
       <p>The 260B Backhoe has buckets available in 203-mm (8-in.), 304-mm (12-in.), and 406-mm (16-in.) digging widths. These buckets are designed to be matched with the backhoe for great performance. All buckets have massive, replaceable, bolt-on digging teeth, great for digging out rocks, concrete, and tree roots. The 203-mm (8-in.) bucket has two digging teeth and the 304 mm (12 in.) and 406 mm (16 In.) have three teeth on them.</p>
       <p> </p>
       <p>The buckets are designed with a large, heavy-duty roll tube, highlighted in the picture above on the right. This large tube ensures the bucket has the strength to handle all the tough situations in which the backhoe will be used.</p>
       
       <h5>Bucket specifications</h5>
       
       <table border="1" cellspacing="2" cellpadding="2">
        <tbody>
         <tr>
          <td width="146"><p> </p></td>
          <td width="175"><p>203-mm (8-in.) bucket</p></td>
          <td width="175"><p>304-mm (12-in.) bucket</p></td>
          <td width="170"><p>406 mm (16 in.)</p></td>
          <td width="170"><p>178-mm (7-in.) trenching bucket</p></td>
         </tr>
         <tr>
          <td width="146"><p>SAE struck capacity</p></td>
          <td width="175"><p>0.011 m<sup>3</sup> (0.42 cu ft)</p></td>
          <td width="175"><p>0.019 m<sup>3</sup> (0.66 cu ft)</p></td>
          <td width="170"><p>0.025 m<sup>3</sup> (0.9 cu ft)</p></td>
          <td width="170"><p>0.0045 m<sup>3</sup> (0.16 cu ft)</p></td>
         </tr>
         <tr>
          <td width="146"><p>Heaped capacity</p></td>
          <td width="175"><p>0.013 m<sup>3</sup> (0.46 cu ft)</p></td>
          <td width="175"><p>0.022 m<sup>3</sup> (0.76 cu ft)</p></td>
          <td width="170"><p>0.03 m<sup>3</sup> (1.06 cu ft)</p></td>
          <td width="170"><p>0.0057 m<sup>3</sup> (0.2 cu ft)</p></td>
         </tr>
         <tr>
          <td width="146"><p>Shipping weight</p></td>
          <td width="175"><p>17 kg (38 lb)</p></td>
          <td width="175"><p>22 kg (49 lb)</p></td>
          <td width="170"><p>27 kg (59 lb)</p></td>
          <td width="170"><p>16.2 kg (35.8 lb)</p></td>
         </tr>
        </tbody>
       </table>
       <p> </p>
       <p><em>NOTE: These buckets are designed to work with only the backhoe specified and will not work with any other John Deere backhoes.</em></p>
      </div>

Specifications
Digging depth	1.9 m6 ft, 2 in.
SAE dipperstick digging force	5280 N538 kg1187 lb
SAE bucket digging force	9056 N924 kg2036 lb
Swing arc	150 degree (angle)
Boom lift capacity	129 kg285 lb
Transport height	1.7 m6 ft, 6 in.
Stabilizers spread width, up	1.5 m4 ft, 10 in.
Stabilizers spread width, down	1.9 m6 ft, 2 in.
Bucket widths	0.2 m (8 in.)0.3 m (12 in.)0.4 m (16 in.)
Swing arc	150 degree (angle)
Bucket rotation	180 degree (angle)
Boom lift capacity	129 kg285 lb
SAE dipperstick digging force	5280 N538 kg1187 lb
SAE bucket digging force	9056 N924 kg2036 lb
Angle of departure	20 degree (angle)
Digging depth	1.9 m6 ft, 2 in.
Loading height (bucket at 60 degrees)	1.5 m5 ft
Reach from center line of swing pivot	2.6 m8 ft, 8 in.
Transport height	1.7 m6 ft, 6 in.
Loading reach (bucket at 60 degrees)	0.8 m2 ft, 9 in.
Transport overhang	0.9 m3 ft, 1 in.
Undercut	0.4 m1 ft, 5 in.
Stabilizer type	Stabilizers spread width, up1.5 m4 ft, 10 in.Stabilizers spread width, down1.9 m6 ft, 2 in.Hydraulic
With 0.4-m (16-in.) bucket	277 kg610 lb