<ul>
<li>Adjustable cutting height</li>
<li>Uses a heavy-duty gearbox with a rating of 65 hp</li>
<li>Compatible with any Category 1 3-point hitch</li>
</ul>


25A Flail Mower

Agriculture

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>


616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>


WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>


DH52 Series Offset Disks

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>


HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>


AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>


FC15M Flex Wing Rotary Cutter

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>


600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>


2550 E-Cut™ Hybrid Diesel Triplex Mower

<ul>
<li>Heavy-duty knife drive and cutterbar for increased reliability</li>
<li>Heavy-duty multi-bat reel improves crop flow</li>
<li>Adjustable reel-cam track to control crop release</li>
<li>Header index ensures optimum platform speeds</li>
</ul>


1100A Auger Platform

<ul>
<li>Digidrive<sup>TM</sup> drive system ensures maximum life</li>
<li>Hydraulic working angle adjustment</li>
<li>Durable Steel tines</li>
<li>Balloon tires operates smoothly on bumpy ground</li>
</ul>


TD13 Series Hay Tedder

Cutters and Shredders

<ul>
<li>20 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>Hammer blade option</li>
</ul>


R20 Flex Wing Rotary Cutter

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Rear wheel torsional suspension with sealed bearings</li>
<li>New frontal suspension and swivel hitch options</li>
</ul>


R15 Flex Wing Rotary Cutter

<ul>
<li>Easy-to-maneuver</li>
<li>Adjustable cutting height</li>
<li>Balanced blade pan</li>
<li>Puncture-resistant rear tires&nbsp;</li>
</ul>


RC20 Series Rotary Cutters

<ul>
<li>10 ft. cutting width</li>
<li>540 PTO RPM</li>
<li>4-inch cutting capacity with optional high impact blades for 5-inch cutting capacity</li>
<li>Rear wheel torsional suspension</li>
</ul>


FC10R Flex Wing Rotary Cutter

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>50-plus HP tractor PTO compatibility</li>
<li>Laminated or pneumatic 4-bolt tires</li>
</ul>


FC15E Flex Wing Rotary Cutter

<ul>
<li>Standard safety chain shields</li>
<li>Standard stump jumper blade holder</li>
<li>3-point hitch quick-coupler (Category 2)</li>
<li>Industry-exclusive Double-Decker™ frame design</li>
</ul>


MX8 MX8 Rotary Cutter

<ul>
<li>Eight-gauge reinforced steel deck</li>
<li>Cutting height from 2.5 cm to 12.7 cm (1 in. to 5 in.)</li>
<li>Quick-detach chain shield assembly</li>
<li>iMatch™&nbsp;quick-hitch compatible</li>
</ul>


FM10 Series Flex-Wing Grooming Mower

<ul>
<li>Gearcases and blade holders provide better performance</li>
<li>Deep-cutting chamber provides a better shredding action</li>
<li>Front and rear safety chains are standard for increased protection</li>
</ul>


HX6 Rotary Cutter

Flail Mowers and Shredders

<ul>
<li>Front rubber deflectors</li>
<li>Heavy-duty gearbox</li>
<li>Steel rotor bearings</li>
<li>Square rotor designed for superior strength</li>
</ul>


520 Drawn Flail Shredder

<ul>
<li>Heavy-duty gearbox and drive shaft</li>
<li>Heavy-duty hood and end plates</li>
<li>Side-slicer knives or optional smooth-cut knives available</li>
</ul>


370 Flail Mower

<ul>
<li>Front rubber deflectors</li>
<li>Heavy-duty gearbox</li>
<li>Steel rotor bearings</li>
<li>Convenient rear grease fittings</li>
</ul>


120 Drawn Flail Shredder

<ul>
<li>Heavy-duty gearbox and drive shaft</li>
<li>Heavy-duty hood and end plates</li>
<li>Reliable, heavy-duty HC section belts</li>
</ul>


360 Flail Mower

<ul>
<li>Heavy-duty gearbox</li>
<li>Steel rotor bearings</li>
<li>Convenient rear grease fittings</li>
<li>Square rotor designed for superior strength</li>
</ul>


115 Drawn Flail Shredder

<ul>
<li>Adjustable cutting height</li>
<li>Available with a 12 or 26-inch offset</li>
<li>Heavy-duty gearbox and drive shaft</li>
<li>Reliable, heavy-duty HC section belts</li>
</ul>


390 Offset Flail Mower

John Deere

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm<sup>3</sup> (13 cu. in.) / 180 cm<sup>3</sup> (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>


1470G Wheeled Harvester

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>


1010G Forwarder

Landscaping and Grounds Care

<ul>
<li>Large, easy-access step and hand brace</li>
<li>Upgraded valve provides smooth hydraulics for precise control</li>
<li>Available field-install thumb option</li>
<li>Stabilizer, boom and swing locks accessible from the operator’s seat</li>
</ul>


260B Backhoe

<ul>
<li>Net Power:  116&nbsp;kW (155&nbsp;hp) at 1,400&nbsp;rpm</li>
<li>Operating Weight:  18&nbsp;422&nbsp;kg&nbsp;(40,614&nbsp;lb.)</li>
<li>Heaped Capacity: 1.9 m<sup>3</sup> (2.4&nbsp;cu.&nbsp;yd.)</li>
<li>Breakout Force: 148&nbsp;kN (33,271&nbsp;lbf)</li>
</ul>


655K Crawler Loader

<ul>
<li>Net Power: 311 kW (417 hp) at 1,600 rpm</li>
<li>Bucket Capacity: 4.8–6.1 m3 (6.3–8.0 cu. yd.)</li>
<li>Operating Weight: 33,943– 34,777 kg (74,831–76,670 lb.)</li>
</ul>


844L Wheel Loader

<ul>
<li>Premium HVAC cab with light-stone interior</li>
<li>Cargo box power lift</li>
<li>LED headlights</li>
<li>Up to 4,000-lb towing capacity</li>
</ul>


XUV835R Premium Cab Crossover Utility Vehicle

<ul>
<li>Powerful diesel engine and ultimate HVAC cab with genuine leather seats</li>
<li>7-speaker infotainment system with touchscreen</li>
<li>Rear-facing camera and sliding rear window</li>
<li>Versatile Bumper Pro Brush Guard</li>
</ul>


XUV865R Signature Edition Crossover Utility Vehicle

View Product Brochure

<div>
       
       <p>The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.</p>
      </div>

Adjustable cutting height

<div>
       
       <p>All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.</p>
       <p> </p>
       <p>The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.</p>
      </div>

Power take-off (PTO) drive shaft and gearbox

<div>
       
       <p>A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:</p>
       
       <ul>
        <li>
         <div>
          Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.
         </div></li>
        <li>Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.</li>
        <li>Knives pivot at their mounting points to minimize damage if an obstruction is hit.</li>
       </ul>
      </div>

36 flail-knife rotor provides uniform distribution of pulverized material

<div>
       
       <p>The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).</p>
       <p> </p>
       <p>iMatch compatibility starts with serial number 644700.</p>
      </div>

Specifications
Cutting width	CenteredCentered1.98 m78 in.
Cutting height	13 to 127 mm0.5 to 5 in.
Hood thickness	3.2 mm0.125 in.
Number	72 (36 pairs)
Type	Smooth-cut, cupped-type
Speed	1,850 rpm
Diameter	114 mm4.5 in.
PTO	540 rpm
Belts	Single HC section
Gauge roller	140 mm5.5 in.
Minimum	22 kW30 hp
Maximum	56 kW75 hp
Overall width	2.53 m99 in.
Overall height	0.99 m39 in.
Overall length	1 m40 in.