Performance Features
<ul>
<li>E-Z clean smooth decks are on the center and wings.</li>
<li>Wing &ldquo;free float&rdquo; without movement of wing hydraulic cylinder rod extends cylinder life.</li>
<li>Gearbox oil sight gauge allows the checking of the oil level in a few seconds.</li>
<li>PTO driveline holder is standard.</li>
<li>Wheel spindles are in halves for economy and ease of maintenance.</li>
<li>A single hydraulic hose is standard for lifting. Two hoses are optional for lifting wings independently of center section.</li>
</ul>
Construction Features
<ul>
<li>Center section cushions are at each axle arm to absorb shocks near the wheels.</li>
<li>Replaceable full length sideband skids give maximum protection and strength to the sideband.</li>
<li>Wheel hub cap retainers are standard to prevent loss of cap and hub grease.</li>
</ul>
&nbsp;

1812 Flex-Wing Rotary Cutter

Bush Hog

Performance Features
<ul>
<li>3210 Series comes in a Lift, Pull, Semi-Mount &amp; Offset Model</li>
<li>Rubber Element Cross Shafts</li>
<li>Heavy Duty Cushioned Axles</li>
<li>Two Round Blade Holders</li>
<li>See Specifications Page For Models 3210 &amp; 3210 Offset</li>
</ul>
Construction Features
<ul>
<li>10-gauge Deck Construction</li>
<li>7-gauge Strongbacks</li>
<li>1/4-inch Sidebands</li>
<li>Rubber Cushioned Axle Arms</li>
<li>5 Year Gearbox Limited Warranty</li>
<li>Powder Coat Paint</li>
</ul>
&nbsp;

3210 Lift Series Multi-Spindle Rotary Cutters

Performance Features
<ul>
<li>Wing skids are 3/8&rdquo; thick for extended wear and outside edges are turned up at 45&deg; to stop heavy ground contact thatmight damage the sidebands.</li>
<li>Center section blades properly align with center wheels to closely cut out the bottom of ditches.</li>
<li>Grease fittings and spring steel bushings at axle pivot points for longer life.</li>
<li>Free wing float without movement of the hydraulic cylinder rod is 22&deg; down and 45&deg; up.</li>
</ul>
Construction Features
<ul>
<li>Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.</li>
<li>The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.</li>
<li>Bush Hog&rsquo;s E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.</li>
</ul>
&nbsp;

3810 Single Flex-Wing Series Rotary Cutters

<h5>Performance Features </h5>
<ul style="list-style-type: disc;">
<li>25&rdquo; Rotor with 2 Knives at 74 lbs.</li>
<li>25gpm recommended flow</li>
<li>20-30gpm flow range</li>
</ul>
<h5>Construction Features </h5>
<ul style="list-style-type: disc;">
<li>4&rdquo; Diameter Capacity (Max. 10&rdquo; Slab)</li>
<li>4&rdquo; x 10&rdquo; Chipper Housing Opening</li>
<li>65&rdquo; Discharge Hood Height</li>
<li>740 lbs. Total Weight</li>
<li>Dimensions (LxWxH) 80&rdquo; x 57&rdquo; x 72&rdquo;</li>
</ul>

XC42S, XC Series Wood Chipper

<ul style="list-style-type: disc;">
<li>All Purpose Plows range in working widths from 44&rdquo; to 80&rdquo;.</li>
<li>Three point lift Cat. 1 Standard or Quick Hitch.</li>
<li>Frame construction is 2-1/2&rdquo; x 2-1/2&rdquo; x 3/8&rdquo; angle iron.</li>
<li>Reversible Plow Points and are made of High Carbon steel</li>
</ul>

All Purpose Plows

<h5>Performance Features </h5>
<ul style="list-style-type: disc;">
<li>25 Ton 36&rdquo; Splitting Length</li>
<li>4.5&rdquo;/36&rdquo; Cylinder Diameter/Stroke</li>
<li>13 GPM Recommended Minimum Hydraulic Flow</li>
<li>Average Cycle 11.43 seconds*</li>
<li>Full Cycle 22.86 seconds*</li>
<li>*depends on flow from tractor/skidsteer</li>
</ul>
<h5>Construction Features </h5>
<ul style="list-style-type: disc;">
<li>Horizontal Splitter Orientation</li>
<li>Dimensions (LxWxH) 90&rdquo; x 36&rdquo; x 22&rdquo;</li>
<li>Weight 680 lbs.</li>
<li>Optional 4 Way Wedge: W4130</li>
</ul>

LS2536S Log Splitter

<ul style="list-style-type: disc;">
<li>Quick Hitch Compatible</li>
<li>Heavy-Duty Boxed Frame</li>
<li>Heavy-Duty A Frame</li>
<li>Heat-Treated Reversible and Replaceable Cutting Edges</li>
<li>Double Strap Hitch</li>
<li>Heat-Treated Scarifier Teeth</li>
<li>Heavy Duty End Plates</li>
<li>Powder Coat Paint</li>
</ul>

Roll Over Box Blade

Performance Features
<ul>
<li>Heavy duty augers equipped with double flighting for more cutting surfaces and faster digging</li>
<li>Special alloy pinion gears and tapered roller bearings on both sides of each gear</li>
</ul>
Construction Features
<ul>
<li>2400 Series model fits both Cat. 1 and Cat. 2 tractors</li>
<li>Offered in both regular duty and heavy duty augers in sizes from 6-inch to 12-inch</li>
<li>Rugged gearbox construction</li>
<li>Shear pin driveline protection</li>
<li>Options include Hydraulic Down Force Kit, Parking Stand, and Auger Extensions</li>
</ul>
&nbsp;
&nbsp;

PHD2401 Post Hole Digger

Performance Features
<ul>
<li>Bush Hog&reg; Performance in an Economical Pasture Mower</li>
<li>9-feet 9-inches Cutting Width</li>
<li>Rubber cushioned axles gives load protection when working on rough terrain.</li>
<li>Manual or hydraulic lift, single or dual axles on pull models.</li>
<li>High Blade Tip Speeds</li>
<li>Round blade pans are standard equipment.</li>
</ul>
Construction Features
<ul>
<li>Available In Lift, Pull &amp; Semi-Mount</li>
<li>5 Year Gearbox Limited Warranty</li>
<li>Floating A Frame HItch</li>
<li>Strongbacks are 7 gauge box steel</li>
<li>Drivelines are fully shielded and tough slip clutches standard on all models.</li>
<li>Deep side bands and high blade tip speeds assure better cutting performance.</li>
<li>Round blade pans are standard equipment.</li>
</ul>
&nbsp;

SQ84T Multi-Spindle Rotary Cutters

Performance Features
<ul>
<li>Free Wing Float, without movement of each hydraulic cylinder rod, is 22&deg; down and 45&deg; up.</li>
<li>Each cutting gearbox has the industry&rsquo;s first massive 3-inches output shaft with more splines that are deeper for maximum transmission of torque to the blade pan.</li>
<li>The 2820 is available with Round Blade Carriers or Straight Shredder Blade Bars. The optional Shredder Kit will increase the shredding performance even more that the straight shredder bars.</li>
<li>An optional Material Distribution Baffle Kit spreads cut material to eliminate windrows.</li>
<li>Each wing has a single deck without exposed structure underneath.</li>
<li>The 2820 is available with optional deck rings that reduce the possibility of blade to deck contact.</li>
</ul>
Construction Features
<ul>
<li>Blade Pans are reinforced for maximum durability.</li>
<li>Spring Axle Cushions are located near each wheel for maximum shock absorption.</li>
<li>Wing Skids are formed upward at 45&deg; to prevent &ldquo;dig in&rdquo; on turns that might damage the sideband.</li>
<li>Grease Fittings and Spring Steel Bushings for minimum wear are at each axle pivot point.</li>
<li>The center section has a doubled deck with no exposed structure for a smooth flow of cut material.</li>
</ul>
&nbsp;

2820 Flex-Wing Rotary Cutter

<h5>Performance Features </h5>
<ul style="list-style-type: disc;">
<li>20 Ton 24&rdquo; Splitting Length</li>
<li>4&rdquo;/24&rdquo; Cylinder Diameter/Stroke</li>
<li>10 GPM Recommended Minimum Hydraulic Flow</li>
<li>Average Cycle 6.62 seconds*</li>
<li>Full Cycle 13.24 seconds*</li>
<li>*depends on flow from tractor/skidsteer</li>
</ul>
<h5>Construction Features </h5>
<ul style="list-style-type: disc;">
<li>Inverse Horizontal Splitter Orientation</li>
<li>Dimensions (LxWxH) 66&rdquo; x 36&rdquo; x 22&rdquo;</li>
<li>Weight 339 lbs.</li>
<li>Optional 4 Way Wedge: W4120</li>
<li>Built-in stripper plates</li>
</ul>

LS2024IS Log Splitter (Inverted)

Flex Wing Series

<ul>
<li>Heavy structure on center section and wings.</li>
<li>Wing skids are 3/8&rdquo; thick with an outside angle of 45 degrees to stop &ldquo;ground dig-in&rdquo; during turns.</li>
<li>All axle spindles are half shafts for quick and less costly maintenance.</li>
<li>Center section blades align closely with outside center tires to closely cut out the bottom of ditches.</li>
<li>Grease fittings and spring steel bushings are at axle pivot points for longer life.</li>
<li>Each cutting gearbox has a 3 inch output shaft with more and deeper splines than competitor models for maximum torque load capabilities.</li>
<li>All drivelines are EZ lube with grease points aligned and the cross bearing fitting is in the end cap.</li>
</ul>
&nbsp;

4815 Series Flex-Wing

Performance Features
<ul>
<li>Wing and center skids are 3/8-inch thick for extended wear and outside edges are turned up at 45&deg; to stop heavy ground contact that might damage the sidebands.</li>
<li>Center section blades properly align with center wheels to closely cut out the bottom of ditches.</li>
<li>Grease fittings and spring steel bushings at axle pivot points for longer life.</li>
<li>Free wing float without movement of the hydraulic cylinder rod is 22&deg; down and 45&deg; up.</li>
</ul>
Construction Features
<ul>
<li>Industry first, massive 3-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torqueto blade pan.</li>
<li>The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.</li>
<li>Bush Hog&rsquo;s E-Z lube drivelines are quick and easy to service. All grease fittings on the pto CV driveline and wing drivelines align for quick location of grease points. Since all grease fittings on all drivelines are in an up position on every 5th revolution, service times are reduced.</li>
</ul>
&nbsp;

2810 Single Flex-Wing Rotary Cutter

Performance Features
<ul>
<li>Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.</li>
<li>Center section blades properly align with center wheels to closely cut out the bottom of ditches.</li>
<li>Grease fittings and spring steel bushings at axle pivot points for longer life.</li>
<li>Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.</li>
<li>Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.</li>
</ul>
Construction Features
<ul>
<li>Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.</li>
<li>Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.</li>
<li>All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.</li>
<li>Greaseable Axle Pivot Points with spring steel bushings</li>
<li>Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.</li>
<li>Powder Coat Paint</li>
</ul>
&nbsp;

Flex Wing Series Bush Hog® 2815 Flex Wing Rotary Cutters

Performance Features
<ul>
<li>Wing and center skids are 3/8-inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.</li>
<li>Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.</li>
<li>Grease fittings and spring steel bushings at axle pivot points for longer life.</li>
<li>Free wing float without movement of the hydraulic cylinder rod is 22° down and 45° up.</li>
<li>Improved suspension that absorbs more shock loads at the tires.</li>
</ul>
Construction Features
<ul>
<li>Industry first — 3-inches O.D. output shaft in cutting gearboxes.</li>
<li>Reinforced blade pans for maximum durability in heavy cutting conditions.</li>
<li>Wing drivelines are ASAE Cat.5 for use in heavy cutting conditions.</li>
<li>Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked</li>
<li>E-Z lube drivelines are quick and easy to service. All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.</li>
</ul>
&nbsp;

3815 Flex Wing Rotary Cutters

Performance Features
<ul>
<li>Axle spindles are in halves for quick and economical service.</li>
<li>Center section blades closely align with center section wheel to better cut the bottom of ditches.</li>
<li>Grease fittings and steel bushings at axle pivot points for extended life at pivot areas.</li>
<li>Wing free float without movement of wing hydraulic cylinder rod extends cylinder life.</li>
<li>Optional distribution baffles spread grass and cornstalks to eliminate windrows.</li>
<li>Improved wing design results in a clean top and no exposed structure underneath.</li>
</ul>
Construction Features
<ul>
<li>Each axle arm on the center section has a rubber cushion to absorb the shock loads near the wheel.</li>
<li>Patented oil sight gauge in all three cutting gearboxes for quick and easy monitoring of oil level.</li>
<li>Bush Hog&rsquo;s E-Z lube drivelines are quick and easy to service.</li>
<li>All grease fittings on the PTO CV driveline and wing drivelines closely align for quick location of grease points.</li>
</ul>
&nbsp;

1815 Flex Wing Rotary Cutter

<ul>
<li>1,600-gallon (6,057 L) tank</li>
<li>Up to 132-foot (40.23 m) boom</li>
<li>375 hp, 9.0 L engine</li>
<li>35 mph (56.3 km/h) transport speed</li>
</ul>

616R Sprayer

<ul>
<li>Pull-type unit with drawbar</li>
<li>Adjustable discharge chute</li>
<li>Reversible, hydraulic feed roll</li>
</ul>

WC12 Series Wood Chippers

<ul>
<li>Adjustable blade scrapers increase productivity</li>
<li>Notched or smooth disk blades available in two sizes</li>
<li>Durable Clevis hitch</li>
<li>Oil bath tapered roller bearings minimize maintenance</li>
</ul>

DH52 Series Offset Disks

<ul>
<li>Net Power: 200 kW (268 hp) at 1,900 rpm</li>
<li>Pump Capacities: 210 cm3 (13 cu. in.) / 180 cm3 (11 cu. in.)</li>
<li>Boom Reach: 8.6 m (28.2 ft.) / 10 m (32.8 ft.) / 11.0 m (36.1 ft.)</li>
</ul>

1470G Wheeled Harvester

<ul>
<li>Forged-steel bale spear tines</li>
<li>Hitch provides a super-quick connection</li>
<li>Tubular frame is built strong&nbsp;</li>
</ul>

HS20 Series 3-Point Hitch Bale Spears

<div>
<ul>
<li>Cover more acres per day with less stress by extending AutoTrac into post emerge in-field operations such as spraying and harvest.</li>
<li>Protect crop yield when applying crop protectants and nutrients in stand crop by making sure that the sprayer or tractor stays off of the crop rows.</li>
<li>Focus on quality of the job being performed and ensure that the machine is operating as it should rather than being concerned about steering the machine in standing crop.</li>
</ul>
</div>

AutoTrac™ RowSense™ AutoTrac™ RowSense™ (Available on Combines, Sprayers and Tractors)

<ul>
<li>15 ft. cutting width</li>
<li>540 or 1000 PTO RPM</li>
<li>Front and rear suspension options</li>
<li>Inward or outward rotation</li>
</ul>

FC15M Flex Wing Rotary Cutter

<ul>
<li>Net Power: 131 kW (178 hp) at 1,900 rpm</li>
<li>Boom Reach: 8.5 m (27.9 ft.) / 10 m (32.8 ft.)</li>
<li>Tractive Force: 150 kN (33,721 lbf) with 24.5 tires/ 160 kN (35,969 lbf.) with 26.5 tires.</li>
<li>Load Rating: 11 000 kg (24,251 lb.)</li>
</ul>

1010G Forwarder

<ul>
<li>200 or 300 cu. ft. (5.6 or 8.5 m3)dry box </li>
<li>375 hp, 9.0 L engine</li>
<li>25 mph (40.2 km/h) field speed, 35 mph (56.3 km/h) transport</li>
<li>Integrated intelligence with StarFire™ receiver, JDLink™ connection, and more</li>
<li>Three cab and visibility packages to customize your sprayer</li>
</ul>

600R Dry Spinner Spreader

<ul>
<li>A proven design that drives the cutting unit with electric reel motors</li>
<li>102 potential leak points eliminated in the reel circuit</li>
<li>Reduced sound levels and fuel consumption @ 2250 RPM</li>
<li>Greatly reduce triplex ring with exclusive offset cutting units</li>
</ul>

2550 E-Cut™ Hybrid Diesel Triplex Mower

Rotary Cutters and Crop Shredders

Performance Features
<ul>
<li>Cutting Widths from 4 to 6-feet and up to 1-inch diameter</li>
<li>Gearbox Rating PTO of 60 HP</li>
<li>Blades built to tear through varied vegetation</li>
</ul>
Construction Features
<ul>
<li>Deep Channel Sideband in 10-gauge x 8-inches</li>
<li>Durable Laminated Tires</li>
<li>Floating Top Hitch Link with a 3-point lift</li>
<li>Available in Red, Orange, Blue, and Green</li>
</ul>
&nbsp;

Razorback Series Rotary Cutters (BH4, BH5, BH6)

Performance Features
<ul>
<li>Rated for Min. 90 HP Tractors</li>
<li>Available With Row Crop Shredding Kit</li>
<li>Rubber Element Cross Shafts</li>
<li>Heavy Duty Rubber Cushioned Axles</li>
<li>High Blade Tip Speeds</li>
<li>Three Round Or Straight Blade Holders</li>
<li>Slip Clutch Standard</li>
</ul>
Construction Features
<ul>
<li>10-gauge Deck Construction</li>
<li>7-gauge Strongbacks</li>
<li>Deep Sidebands</li>
<li>Rubber Cushioned Axle Arms</li>
<li>Round Blade Pan Or Straight Bar</li>
<li>5 Year Gearbox Limited Warranty</li>
<li>Powder Coat Paint</li>
</ul>
&nbsp;

3414 Series Multi-Spindle Rotary Cutters

Performance Features
<ul>
<li>Ideal for pasture clipping and grass cutting</li>
<li>Cut saplings up to 2-inches diameter</li>
<li>Easy to operate</li>
<li>All models except BH17 attach with Category I standard or optional quick hitch, the BH17 uses Category I or II standard and quick hitch.</li>
<li>Laminated tire with bearings on all models</li>
<li>Shear pin or slip clutch protection on BH15 and BH16</li>
<li>Slip clutch standard on BH17</li>
</ul>
Construction Features
<ul>
<li>Below Deck Structure of strongbacks and gearbox stand allows for a smooth top deck which sheds water and debris.</li>
<li>Continuously welded Side Bands tied together through the integrated gearbox stand.</li>
<li>Curved Rear Band to resist bending going forward and backing up.</li>
<li>Tail Wheel Beam has 3/16-inch wall and is clamped between two heavy steel plates for a secure fit to resist side loads during turns.</li>
<li>Bush Hog&reg; Blades made are forged and heat treated for long-lasting sharpness.</li>
<li>Bush Hog&reg; Gearboxes has splined output shafts with tapered roller bearings resist thrust and side loads as the pan pushes the cutter up or to the side of large obstacles like rocks or stumps.</li>
<li>Laminated Tail Wheel with laminated style rubber</li>
<li>Full Length Skids with 1/4-inch skids run one-half the length for add strength that resists bending.</li>
<li>All models available in tractor colors.</li>
</ul>

BH10 Single-Spindle Rotary Cutters

<ul>
<li>Blades chop through tough cotton, BT corn stalks, milo, rice, wheat, or vegetable stubble</li>
<li>Re-cutter bar speeds up decomposition of plant residue to get nutrients back into the ground quickly</li>
<li>Frame provides ground cover to minimize wind and water erosion</li>
<li>Available in 15, 18, 20, and 25-feet widths to fit your crop&rsquo;s row spacing</li>
</ul>
&nbsp;